Noticias
Viper84
quiere este artículo
quiere este artículo
F-14A Tomcat VF-154 Last Combat Cruise 2003
Fightertown Decals 1:72
72005 8 August, 19:55
CF104
tiene este artículo
tiene este artículo
F-20 Tigershark Engine Nozzle Set for Freedom Models, Hasegawa
Wolfpack 1:48
WP48205 2016 Nuevos moldes 8 August, 19:55
Nicolas
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
33 imágenes
WIP: Eurocopter BK-117 "Space Design" D-HBKS 1:72
decals on the panel and the buckles of the seatbelts scratched from alutape. With the litle bit one can see when the fus...
Proyecto: BK 117 "SPACE DESIGN"
17 24 June, 19:12
Nicolas
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.
24 June, 19:17
Nicolas
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.
8 July, 19:15
Nicolas
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.
8 July, 19:56
Nicolas
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.
9 July, 19:06
Shar Dipree
I have the same kit too. I'm really looking forward to your results. Following. 🙂
I have the same kit too. I'm really looking forward to your results. Following. 🙂
13 July, 05:27
Nicolas
Welcome Łukasz, there is no reason to be afraid. The fit seams quite good, and the missing details is somthin one can improve. 😉
Welcome Łukasz, there is no reason to be afraid. The fit seams quite good, and the missing details is somthin one can improve. 😉
15 July, 16:33
bughunter
The Colani design is cool 👍 Have fun!
And I hope your covid is gone without bad effects!
The Colani design is cool 👍 Have fun!
And I hope your covid is gone without bad effects!
19 July, 18:39
Nicolas
Hi Bughunter, thanks.
Covid wasn't to bad, I got 3 day with mild syntomas and 5 days waiting for a negativ test. 😉
Hi Bughunter, thanks.
Covid wasn't to bad, I got 3 day with mild syntomas and 5 days waiting for a negativ test. 😉
19 July, 19:38
Mr D
Done some nice improvements Nicolas... Be worth it, it's good to do this as puts a nice personal touch on it, l need to pick up some card like you have used ( what is it l need to look for ?)
The 2 Revell models l built ...l found the decals took a bit more softening than others models l have done!? the decals said made in Italy....no company name.
Looking good 👍 be nice bright unusual one this 😁
Done some nice improvements Nicolas... Be worth it, it's good to do this as puts a nice personal touch on it, l need to pick up some card like you have used ( what is it l need to look for ?)
The 2 Revell models l built ...l found the decals took a bit more softening than others models l have done!? the decals said made in Italy....no company name.
Looking good 👍 be nice bright unusual one this 😁
8 August, 19:53
Jimblemon
tiene este artículo
tiene este artículo
German
7,5cm Anti-Tank Gun Pak 40, Late with elite artillerie regiment crew MiniArt 1:35
35409 2023 Nuevas piezas 8 August, 19:52
Jimblemon
tiene este artículo
tiene este artículo
German
7.5cm Anti-Tank Gun PAK 40 mid. prod. with field artillery crew MiniArt 1:35
35400 (MA35400) 2024* Nuevas piezas 8 August, 19:51
CF104
tiene este artículo
tiene este artículo
McDonnell Douglas
AV-8B Harrier II - Ejection Seat w/ Safety BeltsQuickboost 1:48
QB 48 522 2013 Nuevos moldes 8 August, 19:51
BAT21
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
85 18 April, 17:24
Robert Podkoński
I have uploaded a few photos of Polish Mi-6 before and after restoration here:
Once there was a collection | Album by podkon ; and here:
Polish Air Force Museum - Dęblin | Album by podkon. Perhaps you will find them useful.
I have uploaded a few photos of Polish Mi-6 before and after restoration here:
Once there was a collection | Album by podkon ; and here:
Polish Air Force Museum - Dęblin | Album by podkon. Perhaps you will find them useful.
23 April, 19:04
Alexander Grivonev
Habe den Kit seit Jahren im Besitz, traue mich aber nicht ran. Was für ein Monster👍
Habe den Kit seit Jahren im Besitz, traue mich aber nicht ran. Was für ein Monster👍
24 May, 17:06
BAT21
Wer bei der Tu 128 von Trumpeter alle Fehler in Perfektion beseitigt hat, muss sich nicht vor der Mi-6 fürchten.
Etwas Spachtelmasse und Schleifpapier bereitlegen... und schon kann es losgehen 😉
Wer bei der Tu 128 von Trumpeter alle Fehler in Perfektion beseitigt hat, muss sich nicht vor der Mi-6 fürchten.
Etwas Spachtelmasse und Schleifpapier bereitlegen... und schon kann es losgehen 😉
24 May, 18:54
Alexander Grivonev
Ja das war wirklich eine Baustelle das Ding. Aber trotz des Ehrgeizes der Chinesen, dem Modellbauer auch den letzten Nerv zu rauben, sieht mir Amodel so auf den ersten Blick nach mehr Arbeit aus...
Ja das war wirklich eine Baustelle das Ding. Aber trotz des Ehrgeizes der Chinesen, dem Modellbauer auch den letzten Nerv zu rauben, sieht mir Amodel so auf den ersten Blick nach mehr Arbeit aus...
24 May, 21:21
Michael Kohl
Starts to look like a Mil Mi-6? Well, then it's time to charge the teaser to a picture of your model. 😉
Starts to look like a Mil Mi-6? Well, then it's time to charge the teaser to a picture of your model. 😉
2 June, 19:37
Juergen Klinglhuber
Joining in late, but sure worth it. Clean built on this "filling the gaps" giant. 👍
Joining in late, but sure worth it. Clean built on this "filling the gaps" giant. 👍
15 June, 14:45
Treehugger
Q: The tiny "brass" colored tubes for the wiring on the main rotor head, are those bits of cut up syringe tips?
Q: The tiny "brass" colored tubes for the wiring on the main rotor head, are those bits of cut up syringe tips?
15 June, 16:42
CaptGPF
That rotor work is sick!
…but so is the PE cockpit work at this scale! Watching!
That rotor work is sick!
…but so is the PE cockpit work at this scale! Watching!
22 June, 17:03
BAT21
Thank you mates.
The self-cut masks on the side windows revealed a catastrophic picture after removal: something sticky remained on the windows... the hoped-for cover was also rather poor, the paint got under the masks at the edges. 🤬
Now I'll make a calming coffee and then try to repair it.
Thank you mates.
The self-cut masks on the side windows revealed a catastrophic picture after removal: something sticky remained on the windows... the hoped-for cover was also rather poor, the paint got under the masks at the edges. 🤬
Now I'll make a calming coffee and then try to repair it.
8 August, 08:42
Alec K
Damn, that sucks. I had same experience on several builds, nothing some scraping and reapplication of Future can't fix.
Damn, that sucks. I had same experience on several builds, nothing some scraping and reapplication of Future can't fix.
8 August, 13:08
Thomas Kolb
That's unfortunate, but maybe you can remove the tape residue with some IPA alcohol and cotton buds?
That's unfortunate, but maybe you can remove the tape residue with some IPA alcohol and cotton buds?
8 August, 13:25
BAT21
I scraped everything off with a toothpick, more or less. Not the best result, but the model was able to avoid being thrown away.
I scraped everything off with a toothpick, more or less. Not the best result, but the model was able to avoid being thrown away.
8 August, 14:37
Spanjaard
seems you recovered pretty well from the problem, congratulations great result
seems you recovered pretty well from the problem, congratulations great result
8 August, 16:41
Stephan Fässler
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
19 imágenes
3rd kitNuevo: 8 August, 18:56 1:48
The Mosquito it is…
Proyecto: Fairchild AU-23A Peacemaker
11 19 July, 13:54
Stephan Fässler
Hi D, not sure which American Movie, probably 😉 they been around for ages
Cheers pal
Hi D, not sure which American Movie, probably 😉 they been around for ages
Cheers pal
26 July, 16:33
Stephan Fässler
I tried my luck on the camo paint today. As you can see the brown paint was not properly done, I left out the masking which is a mistake.
What I am having an issue with is I can make thin lines with this 0.45 needle. It's the ULTRA from H&S.
I made certain the needle is not clogged, used two drops of flow improver over 10ml mr hobby and Ultimate thinner used 15Psi on finest airbrush setting. Need still more practice with it, anyone have some advice? I was on some strokes too stationary, hence the splashes 🙂
Will try to fix this in the next days…..
Thanks 😊
I tried my luck on the camo paint today. As you can see the brown paint was not properly done, I left out the masking which is a mistake.
What I am having an issue with is I can make thin lines with this 0.45 needle. It's the ULTRA from H&S.
I made certain the needle is not clogged, used two drops of flow improver over 10ml mr hobby and Ultimate thinner used 15Psi on finest airbrush setting. Need still more practice with it, anyone have some advice? I was on some strokes too stationary, hence the splashes 🙂
Will try to fix this in the next days…..
Thanks 😊
7 August, 21:05
Mr D
Sorry the movie is called (Air America) with Mel Gibson, they are contracts pilots in Thailand for US government, They use the Peacemaker. Looking good 👍👍
Sorry the movie is called (Air America) with Mel Gibson, they are contracts pilots in Thailand for US government, They use the Peacemaker. Looking good 👍👍
7 August, 21:21
/es/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=es
35
35
/es/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo