Noticias
Peter Wu
I'm not sure if this is common sense, but as a model player, choosing the decals provided in the box rather than opting for third-party decals might be considered an act of someone who is financially constrained.
我想知道作为一个模型爱好者,做模型时选择OOB的涂装而不愿意去买第三方水贴,是一种被人瞧不起的穷人行为吗?
我想知道作为一个模型爱好者,做模型时选择OOB的涂装而不愿意去买第三方水贴,是一种被人瞧不起的穷人行为吗?
18 July, 09:17
Treehugger
Yes. I think, typically, but me not being an expert on this subject matter, it seems to me that aftermarket decals might have lower printing quality.
Cartograf is known for manufacturing very good decals. I can't think of any other that make as good decals.
Btw, Eduard sometimes sell scale model kits that explicitly does not contain decals. I think they are called "Overtrees". These are just the plastic parts, maybe surplus items?
Yes. I think, typically, but me not being an expert on this subject matter, it seems to me that aftermarket decals might have lower printing quality.
Cartograf is known for manufacturing very good decals. I can't think of any other that make as good decals.
Btw, Eduard sometimes sell scale model kits that explicitly does not contain decals. I think they are called "Overtrees". These are just the plastic parts, maybe surplus items?
18 July, 09:24
Filipe Ramires
quiere este artículo
quiere este artículo
U.S. ARMY M1 240mm HOWITZER WW2 U.S. Army Howitzer Barrel Set on Transport Wagon
Mirage Hobby 1:72
720020 2024* Nuevos moldes 18 July, 09:24
Martin Oostrom
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
23 imágenes
WIP Köln truckNuevo: 18 July, 09:15 1:24
Dry fit. It will all be painted aluminium
Proyecto: DAF 95 XF & Trailer "Köln Truck"
4 16 June, 18:26
Martin Oostrom
I spent a couple of hours cleaning up some parts that I cut of the frame
I spent a couple of hours cleaning up some parts that I cut of the frame
22 June, 18:33
Bozzer
These curbside chassis, really upset me. Just like the Volvo VN. If the manufacturer, went to the trouble, of making an engine, and separate frame parts, with other kits, then why would they cheap out, on kits like these? I love what you're doing with this though. Keep the pictures coming, buddy 👍
These curbside chassis, really upset me. Just like the Volvo VN. If the manufacturer, went to the trouble, of making an engine, and separate frame parts, with other kits, then why would they cheap out, on kits like these? I love what you're doing with this though. Keep the pictures coming, buddy 👍
22 June, 19:35
Martin Oostrom
I didn't put up pictures of all the cutting and sanding. A summary:
All parts are cut, sanded and glued where possible. Only a few drops of filler were needed.
The cab consists of 10 parts that need to be positioned just right. **** job, but I think I managed.
Next up: Primer.
I didn't put up pictures of all the cutting and sanding. A summary:
All parts are cut, sanded and glued where possible. Only a few drops of filler were needed.
The cab consists of 10 parts that need to be positioned just right. **** job, but I think I managed.
Next up: Primer.
18 July, 09:20
Andrej Bassich
quiere este artículo
quiere este artículo
PT35025 WWII German Pz.III/IV 40cm Normal Tracks Middle Pattern C 1/35
Heavy Hobby 1:35
PT35025 18 July, 09:10
Andrej Bassich
quiere este artículo
quiere este artículo
WWII German 20L Jerry Cans B (1941-1945)
Heavy Hobby 1:35
HH 35023 18 July, 09:10
Andrej Bassich
quiere este artículo
quiere este artículo
Bolsche (Bosch) Camouflage Headlight for WWII Germany Panzer
Heavy Hobby 1:35
HH-35005 2021 Nuevos moldes 18 July, 09:10
Andrej Bassich
quiere este artículo
quiere este artículo
WWII German Pz.III/IV 40cm Normal Tracks Middle Pattern B Pz.III ausf.F-N /StuG.III ausf.F-G/Pz.IV ausf.G-H/Nashorn/Hummel
Heavy Hobby 1:35
PT-35019 2021 Nuevos moldes Multitema (5)18 July, 09:09
pato05
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
24 imágenes
Mil Mi-2 Air Transport Europe OM-OIU - Work In ProgressNuevo: 17 July, 16:35 1:72
After very long time of pause in modeling, the interior is complete and painted.
Proyecto: Mil Mi-2 Air Transport Europe OM-OIU
13 4 July 2018, 07:48
pato05
Little progress. I added few more details to the interior. Next step will be surfacer and painting.
Little progress. I added few more details to the interior. Next step will be surfacer and painting.
13 July 2018, 07:55
Konrad
pato05 - you have decided do not open pilots doors? Why? Your work is amazing 🙂
pato05 - you have decided do not open pilots doors? Why? Your work is amazing 🙂
18 July 2018, 20:53
pato05
Kon_Bar - Thank you very much. I was thinking about cutting the pilots door, but then I decided not to and make my work a bit easier. The problem is, that the doors would be too thick and would look unrealistic (like heavy armoured door from a tank). Hobby Boss makes very clear parts, so I think the interior will be quite visible anyway. The back doors will be of course open 🙂
Kon_Bar - Thank you very much. I was thinking about cutting the pilots door, but then I decided not to and make my work a bit easier. The problem is, that the doors would be too thick and would look unrealistic (like heavy armoured door from a tank). Hobby Boss makes very clear parts, so I think the interior will be quite visible anyway. The back doors will be of course open 🙂
19 July 2018, 05:53
pato05
Many thanks. Olly - I don't use microscope - just a really fine and sharp brush. All painted with Vallejo paints on brush and finished with Light Grey and Medium Grey wash from Ammo Of Mig Jimenez.
Many thanks. Olly - I don't use microscope - just a really fine and sharp brush. All painted with Vallejo paints on brush and finished with Light Grey and Medium Grey wash from Ammo Of Mig Jimenez.
19 July 2018, 12:08
Uwe Kaeding
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
8 1 August 2017, 12:50
Jim Bob McCabe
That's a lovely build and paint job you have done there, Uwe; inspiring even 👏🏻
That's a lovely build and paint job you have done there, Uwe; inspiring even 👏🏻
17 July, 05:53
Andrej Bassich
quiere este artículo
quiere este artículo
M10 Tank Destroyer - 3-inch M7 (76.2 mm) gun barrel (for Tamiya kit)
Master 1:35
GM-35-053 2024 Nuevos moldes 18 July, 09:07
Falk Röllig
tiene este artículo
tiene este artículo
Mikoyan-Gurevich
MiG-21 Fishbed - Remove Before Flight Covers for Eduard Quickboost 1:72
QB 72 612 2019 Nuevos moldes 18 July, 09:06
Treehugger
Still waiting for this to be released. :
Still waiting for this to be released. :
1 11 February, 12:05
Treehugger
I hope someone will review this kit in the next few weeks. I heh sort of wonder if maybe the delay was maybe caused by manufacturing mishaps.
I hope someone will review this kit in the next few weeks. I heh sort of wonder if maybe the delay was maybe caused by manufacturing mishaps.
18 July, 09:05
Łukasz Gliński
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
12 imágenes
The most famous Bird Dog ever (and its vintage companion)Nuevo: 17 July, 19:48 1:72
AVI fuselage ready for closing
Proyecto: The most famous Bird Dog ever
19 30 June, 13:17
Michael Kohl
I only and sincerely hope that you quadruple checked your references that the original plane didn't have an "Airfix" molded on the cockpit side walls - lest you have to scratch new ones. 😉
I only and sincerely hope that you quadruple checked your references that the original plane didn't have an "Airfix" molded on the cockpit side walls - lest you have to scratch new ones. 😉
30 June, 15:00
Nicolas
I'm in. Got the Airfix kit and the Pavla detail set in my stash, but I'm thinking about replacing it with the AVI kit. I think your report will be a big help there.
I'm in. Got the Airfix kit and the Pavla detail set in my stash, but I'm thinking about replacing it with the AVI kit. I think your report will be a big help there.
30 June, 17:42
Cuajete
Great! The Bird Dog Society has begun. I have felt a great disturbance in the Force, but I remembered that Łukasz is a great tamer of hard plastics 😉
It looks like those photo-etches are doing a good job 👌
Great! The Bird Dog Society has begun. I have felt a great disturbance in the Force, but I remembered that Łukasz is a great tamer of hard plastics 😉
It looks like those photo-etches are doing a good job 👌
30 June, 18:19
Alex K
So... if the AVI kit is destined for the representation of Major Buang-Ly's plane... I'm also eager to see what the Airfix kit will be...
So... if the AVI kit is destined for the representation of Major Buang-Ly's plane... I'm also eager to see what the Airfix kit will be...
30 June, 18:34
Łukasz Gliński
You're absolutely right Alex - AVI's going to be Major's BirdDog and Airfix is destined to be boxart DJ-coded one.
I was thinking of Maltese markings for it, but there are none available.
Cuajete, the PE are quite good, but the Airwaves set has quite unclear hand-drawn instructions, which is challenging sometimes.
Nicolas, wish I could fetch the Pavla tail set, I need to try restoring the raised lines after having to remove the injection marks.
You're absolutely right Alex - AVI's going to be Major's BirdDog and Airfix is destined to be boxart DJ-coded one.
I was thinking of Maltese markings for it, but there are none available.
Cuajete, the PE are quite good, but the Airwaves set has quite unclear hand-drawn instructions, which is challenging sometimes.
Nicolas, wish I could fetch the Pavla tail set, I need to try restoring the raised lines after having to remove the injection marks.
30 June, 19:22
Nicolas
I'd wish there would be a conversion kit to a Siai SM 1019. But I think I have to scratchbuild the different cowling, propeller and tailsection.
I'd wish there would be a conversion kit to a Siai SM 1019. But I think I have to scratchbuild the different cowling, propeller and tailsection.
1 July, 04:46
/es/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=es
35
35
/es/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo