Noticias
Marius
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
37 imágenes
MD 450 Ouragan - Israel - 19561:72
And finished!
MD450 Ouragan of the Israeli Air Force as seen in 1956.
Proyecto: Dassault MD 450 Ouragan - Israel - 1956
46 29 December 2022, 21:11
Mr D
Hi Marius 👍
What metallic paint did you use..??
I'm struggling to airbrush my Velejo silver!! Keeps clogging.
Like your work 👌👍👍
Hi Marius 👍
What metallic paint did you use..??
I'm struggling to airbrush my Velejo silver!! Keeps clogging.
Like your work 👌👍👍
19 September, 19:59
Marius
Thank you guys for the interest and patience with my never ending typos 🙂
I am of course not the first one to build this kit in the IDF version, but I am trying my own approach.
@Mr D: I am using Xtreme Metal paints. Their Aluminium and Duraluminium are by far my favorites among many other I tried in the last years. Both need no thining and can be used directly out of the bottle. The metallic paints from Xtreme Metal are compatible with Alclad metallics, where my first choices for "Steel" and "Jet Exhaust" are. So you can mix both brands for shading. I am using the Mr. Hobby Thinner, since especially the Alclad Steel is thick and more pretentious. Otherwise regarding the Vallejo metallics, although I experimented quite much with acrylics, nobody managed so far to convice me that spraying acrylics has any advantage over the other "dark side" (other than smell). The Vallejo Silver is indeed the best metallic paint I have found so far that can be applied by brush (for small details or minor chipping). It settles well without waves or protuberances maintaining a good shine (if applied properly). Otherwise, I would personally never think of applying acrylic metallics by airbrush. But there is certainly a reason why some people are still trying that, just that I personally don't know the secret recipe.
Thank you guys for the interest and patience with my never ending typos 🙂
I am of course not the first one to build this kit in the IDF version, but I am trying my own approach.
@Mr D: I am using Xtreme Metal paints. Their Aluminium and Duraluminium are by far my favorites among many other I tried in the last years. Both need no thining and can be used directly out of the bottle. The metallic paints from Xtreme Metal are compatible with Alclad metallics, where my first choices for "Steel" and "Jet Exhaust" are. So you can mix both brands for shading. I am using the Mr. Hobby Thinner, since especially the Alclad Steel is thick and more pretentious. Otherwise regarding the Vallejo metallics, although I experimented quite much with acrylics, nobody managed so far to convice me that spraying acrylics has any advantage over the other "dark side" (other than smell). The Vallejo Silver is indeed the best metallic paint I have found so far that can be applied by brush (for small details or minor chipping). It settles well without waves or protuberances maintaining a good shine (if applied properly). Otherwise, I would personally never think of applying acrylic metallics by airbrush. But there is certainly a reason why some people are still trying that, just that I personally don't know the secret recipe.
20 September, 19:55
Mr D
Hi Marius 👋😃👍
Thanks for the info, be really helpful .
I'm trying to learn about paint and techniques....and advice like this is appreciated 👍
I only purchased an airbrush about a year ago.
Yes the Velejo silver brush paints really well.
What size needle jet do you use for the Extreme metrics?? and general use ?
Thanks
Hi Marius 👋😃👍
Thanks for the info, be really helpful .
I'm trying to learn about paint and techniques....and advice like this is appreciated 👍
I only purchased an airbrush about a year ago.
Yes the Velejo silver brush paints really well.
What size needle jet do you use for the Extreme metrics?? and general use ?
Thanks
20 September, 20:07
Clement
Nice work on those stripes.
I share your frustration regarding Print Scale lack of research, they are also pretty hard to apply, especially small stencil sized decals.
I tend to avoid the brand these days.
I'm looking forward to the rest of your build, it's gonna be a stunner.
Nice work on those stripes.
I share your frustration regarding Print Scale lack of research, they are also pretty hard to apply, especially small stencil sized decals.
I tend to avoid the brand these days.
I'm looking forward to the rest of your build, it's gonna be a stunner.
21 September, 06:27
Clement
Outstanding work, especially given the short run nature of the kit.
Another stunner in your display cabinet, Marius!
Outstanding work, especially given the short run nature of the kit.
Another stunner in your display cabinet, Marius!
14 October, 06:31
Łukasz Gliński
Another middle-eastern gem in your collection 👍 Congrats and thanks for sharing the context info, very well researched (as usual)
Another middle-eastern gem in your collection 👍 Congrats and thanks for sharing the context info, very well researched (as usual)
14 October, 12:27
Marius
Thank you mates for having a look and for the kind words, they are highly appreciated. 🙏
Thank you mates for having a look and for the kind words, they are highly appreciated. 🙏
15 October, 09:36
Shantelle Taylor
quiere este artículo
quiere este artículo
Grumman S-2G Tracker RAN Conversion Kit
Air-Graphic Models 1:72
CS-32 15 October, 09:34
Mr D
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
31 13 August, 21:46
Mr D
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
18 August, 13:25
Mr D
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
20 August, 11:14
Mr D
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
21 August, 09:08
Miguel Vaquero
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
26 August, 13:14
Mr D
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
26 August, 13:42
Doubtingmango
Brilliant! The putty really can create a mess with finely molded details
Brilliant! The putty really can create a mess with finely molded details
26 August, 15:01
Mr D
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
26 August, 19:18
Kesa Tiho
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
26 August, 19:29
Mr D
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
30 August, 19:09
Miguel Vaquero
I got to get myself a chrome pen. The result on those details look awesome
I got to get myself a chrome pen. The result on those details look awesome
4 September, 09:53
Mr D
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
4 September, 09:58
Alexander Perov
Do not forget that the mast of the antenna passes through the windshield and is very clearly visible. This model may come in handy in my albums
Do not forget that the mast of the antenna passes through the windshield and is very clearly visible. This model may come in handy in my albums
18 September, 19:29
Mr D
Ok thanks Alexander, HB didnt make the Mast installation very clear, the show it just glued on the top, will be very weak!! I've seen one build and it's come away!!
I'm going to use steel rod.
👍👍
Ok thanks Alexander, HB didnt make the Mast installation very clear, the show it just glued on the top, will be very weak!! I've seen one build and it's come away!!
I'm going to use steel rod.
👍👍
18 September, 19:59
Mr D
Thanks Miguel 👍 the office-tak used to mask.
Will try panel lines n wash for first time on this one
😁👍👍
Thanks Miguel 👍 the office-tak used to mask.
Will try panel lines n wash for first time on this one
😁👍👍
6 October, 19:34
Mr D
Thanks Gorby 😁👍 Appreciate it.
Got the Flat Clear on now....look at some chipping next.
Thanks Gorby 😁👍 Appreciate it.
Got the Flat Clear on now....look at some chipping next.
14 October, 16:54
Falk Röllig
tiene este artículo
tiene este artículo
AV-8B late interior 3D decals (small version) (for Hasegawa kit)
Quinta Studio 1:72
QDS-72134 2024 Nuevos moldes 15 October, 09:30
Falk Röllig
tiene este artículo
tiene este artículo
EF-111 - cockpit with 3D decals (Hasegawa) (3D Printed)
ResKit 1:72
RSU72-0210 15 October, 09:30
Falk Röllig
tiene este artículo
tiene este artículo
Large Ground Blur 03 420 x 297mm
Coastal Kits
CKS1003BL 15 October, 09:29
Falk Röllig
tiene este artículo
tiene este artículo
F/A-18F Late*, E/A-18G interior 3D decals * lots 26 and up
Quinta Studio 1:72
QD72075 2023 Nuevos moldes 15 October, 09:28
Jorge Aristizabal
artículo marcado como pedido
artículo marcado como pedido
Diorama Set
Eurofighter Typhoon & Shelter/Groundplate & Ground Support EquipmentRevell 1:72
04376 2005 Nuevas piezas Multitema (2)15 October, 09:26
ian4711
artículo marcado como disponible para canje/en venta
artículo marcado como disponible para canje/en venta
15 October, 09:26
Jorge Aristizabal
artículo marcado como pedido
artículo marcado como pedido
Leopard 2A5, Fuchs 1A4, Luchs 2A2 & Panzergrenadiere
Revell 1:72
03200 2001 Nuevas calcas Multitema (4)15 October, 09:25
Gergő Takács
artículo marcado como pedido
artículo marcado como pedido
War, conflicts and special operations in Ukraine Part 7 Russian artillery in 2022
Star Decals 1:72
72-A1137 2023 Nuevos moldes 15 October, 09:25
Gergő Takács
artículo marcado como pedido
artículo marcado como pedido
Mi-17 (Hungarian 706, 707)
HungAeroDecals (HAD) 1:72
72093 15 October, 09:24
Gergő Takács
artículo marcado como pedido
artículo marcado como pedido
Mi-17 Painting Masks for 1/72 IBG Models and Hobby Boss kits
IBG Models 1:72
IBG72M006 2024 Nuevos moldes 15 October, 09:23
John Lambert
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
1 imágenes
Airfix Lockheed Martin F-35B Lightning IINuevo: 15 October, 09:23 1:72
Proyecto: Lockheed Martin F-35B Lightning II
15 October, 09:23
/es/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=es
35
35
/es/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo