Noticias

Tommy Agne
Watching 😁✌️.

Edouard Carr
Thanks Tommy 😀

Sam S
Following

Edouard Carr
Thanks Sam hope you like the outcome! 😉

Jos Jansen
Interesting

Rando
Watching! Interested in getting this Academy kit

CaptGPF
Sits and munches popcorn…

Patryk S.
Following! Good luck!

J35J
Taking a chair!👍🏻

Łukasz Gliński
Me 3, I have to see that! Still procrastinating mine 😄
Thomas, are you considering getting rid of the decal with my support perhaps? 😉

Thomas Kolb
Łukasz, I am not going to use the provided decal sheet, so if you want it, just PM me with your address and I can post it.

Thomas Kolb
(And for everybody else with knowledge about the different versions of the Yak-12, yes, I am aware of the differences between the A-version in the kit and the R-version used by the Hungarian People's Army. But since I am not able to scratch build the entire wing and empennage structure, let's just call it artistic license.)

Cuajete
Looking good so far, Thomas 👍
Feel free to take artistic license 😉

Robert Podkoński
Watching for sure!

Alec K
Taking a seat, looks great 👍

Thomas Kolb
Thank you very much, dear gentlemen for your attention and encouraging words!

Michael Kohl
Following too

Nicolas
I'm joining in as well. Great build so far. 👍

Bruce Huxtable
Admiring your skills, and learning from your problem-solving, Thomas. Transforming an A-Model kit adds to the challenges 😉

Thomas Kolb
Thank you Michael, Nicolas & Bruce for your interest and compliments! This kit is actually not quite as bad as some other Amodel kits I have built - the designers have created some pretty nifty solutions here! If anything, it is a bit unforgiving - make one small mistake and you can be sure that it will keep coming back to kick you.

Łukasz Gliński
What a cool visor 👍

Cuajete
Great progress! 👍

Bernhard Pethe
Wunderbarer Modellbau. Ich hab das Modell auch noch liegen und genauso wollte ich es auch machen. Mal sehen, wenn ich groß bin. 😉

Thomas Kolb
Bernhard, danke schön! 🙂 Ja, es ist ein ziemlich kniffliges Modell, aber es macht großen Spaß, es zu bauen!

Cuajete
Looks great so far, Thomas 👍

Nicolas
Yes Thomas, I don't think you get any easy builds from Amodel. But with some work you get a nice and rare model. I realy like your progress. 👍

Thomas Kolb
Bruce, Lukasz, Cuajete, Nicolas, thank you! Yes, Amodel is actually cool in that they take a chance to make models outside the ordinary. Who else would design a model kit of a strange and ugly little high-winged Soviet aircraft instead of another Stuka, Tomcat or a Spitfire?

Danumurthi Mahendra
Lovely topic that I dont see alot. Nice progress!

Roland Sachsenhofer
Wow, what a beautiful an clean build! Inspiring and masterly!

Cuajete
That Alclad gloss coated looks great with the brush, Thomas 👍

Thomas Kolb
Roland thank you mate! Cuajete, yes, this is the best gloss coat I have ever tried. It levels out to an absolute mirror shine (at least if it is applied to a perfectly smooth paint layer). This model ended up with a bit of orange peel effect at some places, so it is not absolutely perfect, but I can get away with it.

Guy Rump
Looking great, following. 👍

Juergen Klinglhuber
Great result Thomas - 👍

Mid Franconian
Do you plan any sanctions against your feline roommate?

DuperScale
Oh no, once my kid destroyed my Hasegawa F-16… 😅 Perfect to make a new one.

Eric Thornton
Fluffy Boy only gets treats... models and kitties don't mix. 😅

Skyhiker
For a relatively new kit I am surprised on how much flash and fitting issues this kit has.

Skyhiker
It's really hard for me to fight off the urge to correct the structural issues with this kit. But I promised myself I would make this one out of the box.

Patrick Hagelstein
I've seen that promise before Skyhiker! 😂 Good luck keeping this one OOB! 😉👍🏼

Skyhiker
I really hate Revell conopys.

Sergio Ordonez
Mate, I think you should put the windshield uspside down. The ángel does not cope with the real one as I see on photographs.

Skyhiker
Unfortunately it looks even worse the other way around. The idiot engineers at Revell should be fired.

Sergio Ordonez
Well, I had some work with French engineers and I know shit happens. Could you take a photo with this one in the other position?

Sergio Ordonez
drive.google.com/fil..J9/view?usp=drivesdk
The windshield is not an isoscelles triangle so the windshield has not a 45 degree ángel over the capot. Please, see these example of a TA-152 (and please, mind It is 35 years old and I was only 13 when I drestroyed It).
I think an easy solution can be made. I do not want any mate to be anoyed by an engineering issue. I had them everyday (it's my job, Factory engineering problem solving, known as 'shit managing") and It can destroy your mojo.

Ben M
What a terrible canopy

Skyhiker
After several hours of sculpting I got the canopy to fit better. I will continue with it tomorrow.

Sergio Ordonez
Your mojo works, mate! Now you have became a great problem solver!
On the other hand, I think another 3D engineering guy needs to stop drinking and 20 years of 2D drafting. The fitting is worse than I could imagine. But I see is no a problem for a seasoned mate like you. Great work, mate!

Nicolas
Following. I build this kit several times in older versions. The fit of the canopy is realy sh*t. My solution was (with about 10 years) to sand the backside of the windshild till it fitted. Of corse so most of the frame is missing.

Thomas Kolb
What a struggle! It reminds me of some Heller and Amodel kits. But it looks that you manage to coax it into shape!

J35J
Great effort and progress! 👍🏻

Skyhiker
Sergio the TA 152 had a very different canopy than the 190. The 152 was designed for high altitude flying, was pressurized and had double panes.

Sergio Ordonez
Thanks you, Skyhiker: I think I can remember now, as I researched about FW190 and TA152 black in the 90's. Also, canopy is bubble-shapped. Sorry, my FW190 Mustang have been gone forever, I expent the night trying to find It, just to find my solution, but I think only the reta of the TA152 has survived.

Mr D
You done a better job of the seat belts than l did 🤣. The cockpit glass on my model was not very clear!
Looking good, ... Thanks for uploading 👍👍👍

Christoph Kunz
LOL, poor people who never build stuff like this 😉

John Hughes
I once reconfigured a Porsche 917 into a starfighter. No idea why.

Kesa Tiho
How is that even possible

gorby
That's a great start at converting models. I've always thought it's important to exercise your imagination frequently. 🙂

Marcin Dudek
I don't know either what it is but I'm loging it!

Kesa Tiho
Gorby i didnt convert anything, just stuck some left over parts and a broken sherman together lol. But yeah i have been exercising my imagination. Even came up with a name for the contraption. Its called the ✨✨✨ "MX4A1" ✨✨✨. A now retired and discontinued bunker buster kamikaze sherman M4A1 with the capability to fire two unguided missiles

Kesa Tiho
No clue what "loging" means but thanks, marcin

Martin Oostrom
I think it's a typo and it should read 'loving'
I'm also loging it!

Juergen Klinglhuber
Started this one.
The Ju 86 which were seen in 2 different Austrian markings, but at the end was never part of the Airforce. Here the overall silver Ju86 #311 at the airshow in Vienna-Aspern in early 1937.

Cuajete
Following 👍

Robert Podkoński
Interesting. Taking a seat here, of course!

Łukasz Gliński
Me 3 👍

Alec K
Me 4 🙂

Finn
I'm in

Dave Flitton
Watching!

Juergen Klinglhuber
Hello mates and thank you for your interest!

Juergen Klinglhuber
The mention aircraft was sent to the Airshow in Aspern as a "demonstrator" in austrian marking. Austria was interessed in buying 18 Ju86K-7. Due to several reasons Junkers was not prepared for that airshow and on short note removed the markings of an 86K-2 that was already prepared to be sold to Sweden. They put on austrian markings, a service number #311 and flew it over to Austria for just this one day. Flight captain Behrendt did a good job and the aerobatic air-display was a great success. So far so good. Why I am telling this? 86-K2 is a differend engine and cowling. The box is a 86E1/2. Aftermarket conversion products are out there (Kora) .....I had difficulties to locate/buy some.
Therefore: it is Scratchbuilding time again !!! 😎

Guy Rump
Following. 👍

Juergen Klinglhuber
Welcome Guy

Alec K
Nice progress. Modelimex is a place to get the Kora parts from, just in case 👍

Łukasz Gliński
There's one set here 😛
mojehobby.pl/product..I-Prewar-Bomber.html

Cuajete
Good explanation, Juergen 👍

Juergen Klinglhuber
thx Alec &Lukasz for you very kind support 👍 - appreciated.
But the first cuts are already done - no way back now 😉
(and I have to odmit: usually I like it to test my skills by a DIY task every now and then)

Bernd Grün
An Austrian Ju 86, I'm in! Nice start, Jürgen! 👍

Juergen Klinglhuber
Hi Bernd! thx

J35J
Great start! Watching with intrest.

Juergen Klinglhuber
Thank you and welcome J35J.

Stefan Fraundorfer
Ah, a new and very interesting project. Of course I will follow that. Have fun with the Ju 86 Jürgen.

Juergen Klinglhuber
Welcome aboard Stefan!

Juergen Klinglhuber
I have finished the modification on the engine resp. cowling. Some new pic's up-loaded.

Roland Sachsenhofer
Very interesting and extremely promising! We talked about it in Ried, and now I'm delighted to see these ideas being realised in such an impressive way!

Juergen Klinglhuber
🙏 Thx alot Roland, I am happy to receive your appreciation.

Nicolas
I'm joining this interesting build.

Łukasz Gliński
Impressive rework of the engines 👍

Alec K
I agree, looks very good 👍

TH SCALE MODELS (Thomas Haberl)
Nice progress Jürgen! I´m in to see how this beauty comes together 👍

Cuajete
Fantastic mods, 👌

Juergen Klinglhuber
Thank you mates for leaving your nice comments.Iam wWorking on the exhaust pipe currently. New picture up-date should be ready after this coming weekend.

Juergen Klinglhuber
All mod's are completted now - after adding the windows of the cockpit I can move it to the paint hangar.

Roland Sachsenhofer
Looks beautiful, clean and masterly done!

Juergen Klinglhuber
Hey - thank you Roland for your feedback. That gives motivation of course 🙂

Roland Sachsenhofer
That's great, that's how it should be, because your construction progress here gives me inspiration 🙂

Juergen Klinglhuber
Ju86 just left the paint hangar,...

Alec K
The metal finish looks great, has nice variation to it 👍

Thomas Kolb
I agree with Alec, the metal surface looks very realistic in the photos!

Cuajete
I agree with Alec and Thomas. Great metallized! 👍

Juergen Klinglhuber
Thank you Alec, Thomas & Cuajete. When I had finished I thought: "Grab, overdone. This bird was for sure not that worn as it went to the airshow more or less fresh from the manufacturer." But the more looked at it the more I was okay with the result. So your comments are welcome and soothe my concerns. 👍

Nicolas
Don't worry Juergen, even on new airplanes there are sometimes clear visual differences in the sheet metal. For example, some manufacturers deburr the rivet holes with a grinding machine, the sheets are made of different alloys or are applied with different rolling directions, all of which have an influence on the appearance. I like it.

Juergen Klinglhuber
Thx Nicolas !!

Flop_Se
Very nice so far! 👍🏻

Alex K
Intéressant! 👍

Zbynek Honzik
Taking a seat! 👍

Ronan
Following 😉

Ronan
Elles sont excellentes tes figurines 👍

Robert Podkoński
Fantastic job so far. Following!

Łukasz Gliński
No way these figures are 1/72, are you sure you picked the correct scale in the description? 😮

Eric Duval
Thank you so much. Yes it is really 1/72 😉

Pietro De Angelis
Great Humber, I have one in the stash too, when I get around to making it one day I hope it turns out half as good as yours!

Krzysztof Szymkiewicz
Thank you 😃 The model itself is very nice to build, the instructions are only sometimes unclear.

Olivier
Well done, Krzysztof ! Deserves a five star rating.

Doubtingmango
Brilliant painting!

Neuling
A masterpiece.

Michael Kohl
Anooother Spit. But, hey - that's one with an awesome paintjob. Top.

Jakub Chlodek
Thanks! appreciate!

J35J
Great build & paintjob!

gorby
Stunning painting and weathering!

Jakub Chlodek
Many thanks!

Doubtingmango
Fantastic! Those don't even look like decals