Noticias

Adrian Forest
For teeny-tiny too-small-for-tweezers photo-etch, I recommend a wax pencil. Might still be impossible, but maybe slightly less impossible? 🙂

J D
Adrian, thanks for your recommendation and I will have a try later.

Kate Ward
If I do them in batches of 8 I need 11 batches for each side. That helps me keep count.

Ben M
Ah, armor modeling. Endless tracks. Watching!

Kate Ward
Oh good, peer pressure, that'll keep me from slacking off. ^_^ I'm up to six 8-link sections of track so far, 16 to go. I had a panic moment where I was afraid I'd bought the wrong tracks, so the first thing I assembled from the Trumpeter kit proper was the sprocket wheels. And whew they do fit! Got a start on the lower hull too before bedtime.

Ben M
I've been curious about metal tracks. I find the plastic individual links hard to work with but maybe I just need more practice.

Robert Podkoński
Taking a seat here 🙂

Kate Ward
I'm still figuring this website out, is the 2nd photo visible? I'm halfway there with the track, 11 of 22 sections, and in addition to the sprockets I've got the idlers and all the road wheels assembled. I was hoping to finish all of Step 1 as well, but I had some fit problems with the upper deck. Did it have to be in 3 pieces, Trumpeter? 😛

For one part of the rear, there's a choice of plastic or PE parts, and I had a go at trying the PE, using a tool handle that was about the right diameter as a mandrel. It didn't come out perfect, but I was looking at photos online of a real KV-85 on display in St Petersburg--the kit instructions were a little unclear about how it should look once assembled--and the real flange has a good big dent in it too. So I figure I'm good. ^_^

Following some old advice I remember from ~20 years ago when I first heard of Friul tracks, I'm using sewing pins rather than the softer wire that comes with the tracks. The fit is snug enough that I can press two links together and they will (4 times out of 5) stay put long enough to slide the pin in. Couple things I've learned the hard way: 1) gotta use a pin vise to drill them out, as hard as it is on my poor old wrists. Using a Dremel, it's too easy to do irreversible damage too fast; 2) don't cut off the pin heads and glue the pins down until I'm REALLY REALLY sure I've got them in the right order.

Two days, 11 sections totaling 88 tracks, and I've only stabbed myself with a pin 3 times. Go me.

Ben M
Yes, the second photo is visible. You can go into the album, click edit, then for "teaser" select "use last image" and then click "save and close" if you want the newest picture to always show.

I would never have guessed to use sewing pins for this, yeah I think drilling all those holes with a pin vise sounds like fun for my arthritis.

Kate Ward
Finished Step 1, not counting some gaps to fill and other cleanup. Oh god, those tiny tiny engine deck lift rings. Thank god the kit came with spares, I yeeted at least 6 of them into oblivion. 😛

Kate Ward
Today's progress was making those two engine vents from the ET Model PE set. I've had that etch-mate sitting in a bin for 20 years, still in the original packaging, never used. 😛 It was a little frustrating to get those teeny teeny pieces aligned, but it was also very satisfying. Part of what attracts me to modeling--especially tank modeling--is a fascination with machinery. How parts fit together, and how they move and interact with each other to make a working machine. It's why I had to choose a subject I could get those working metal Friul tracks for. And bending those PE parts, turning flat sheets into a 3-dimensional object, that just really makes me happy for some reason.

Thank GOD for my optivisor, though.

Hey, more experienced people, I would really appreciate some advice on how to fill that horrible gap between the middle and rear upper deck pieces.

Juskifo
beautiful paint and scratches on the body I will follow the rest with interest
Dragon kits😍

J D
Hi, Juskifo.

Thx for your comment. I made my own RAL 8020 for this Pz. III J. Hope I could still have some spare time to continue my work in next several weeks.

Rui S
I agree with Juskifo. I'm in 😎

J D
Thx for your approval, Rui S.

Pietro De Angelis
Beautiful Panzer III!

J D
Thx for your support, Pietro De Angelis.

Steven Van Dyck
CMK got some T34 adaptations of turrets.T-34/85 model 1943 conversion set (CMK 3070, 1:35)

jaero
i see, thanks for telling me! i needed one for a diorama haha