Noticias
S B
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
18 imágenes
RIAT 23 // Polish Air Force Su-22M4Nuevo: 1 August, 12:15 1:48
Cockpit painted (pre-pinwash and without further PE)
Proyecto: Su-22 Polish AF // Riat 2023
3 28 July, 11:12
Chris Frankenstein
tiene este artículo
tiene este artículo
Российский ударный вертолет Ми-28A Mil Mi-28A Havoc Russian Attack Helicopter
Zvezda 1:72
7246 2010 Nueva caja 1 August, 12:12
Christophe Ameline
tiene este artículo
tiene este artículo
Samurai Warrior Set (4 Figures) History in Miniature Series 1, Chushingura (47 ronins)
Tamiya 1:35
25410 2016 Nueva caja 1 August, 12:04
Wasili
Hi all,
I'm very very new here, but have been modelling professionally since 1996, including prototyping for kit manufacturers. I see some of my old 1/350 prototypes that were made for one company (from 1998 - 2002, in this case Artitec from Amsterdam, NL) have been reboxed, repopped by a different company (Naval Models) a decade later. The Naval Models kits are on this site, but without the history. The original Artitec kits are not on this site. How do i add that history as a contributor ?
Thx very much for the feedback. If i'm asking this in the wrong spot, pls let me know.
I'm very very new here, but have been modelling professionally since 1996, including prototyping for kit manufacturers. I see some of my old 1/350 prototypes that were made for one company (from 1998 - 2002, in this case Artitec from Amsterdam, NL) have been reboxed, repopped by a different company (Naval Models) a decade later. The Naval Models kits are on this site, but without the history. The original Artitec kits are not on this site. How do i add that history as a contributor ?
Thx very much for the feedback. If i'm asking this in the wrong spot, pls let me know.
1 August, 11:14
Ben M
Welcome! I am not an expert at this by any means but I believe you would go into the appropriate naval models kit and click "add based on" to create the corresponding artitec kit. I believe if you post here you will get better help than I can provide: scalemates.com/datasuggestions.php
Welcome! I am not an expert at this by any means but I believe you would go into the appropriate naval models kit and click "add based on" to create the corresponding artitec kit. I believe if you post here you will get better help than I can provide: scalemates.com/datasuggestions.php
1 August, 11:46
Spanjaard
you need to add the artitec kits first, and then you can use the "based on" in the Naval kits. any SCM user can add new kits and do the "based on"
you need to add the artitec kits first, and then you can use the "based on" in the Naval kits. any SCM user can add new kits and do the "based on"
1 August, 12:03
Roland Sachsenhofer
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
58 7 July, 08:59
Roland Sachsenhofer
With these pictures I open the book report on Roden's Junkers D.1: I tried to extend the interior with some steel wire, the seat belts are from Eduard. For the detailing I downloaded the very interesting building instructions from Wingnut Wings for the large D.1 in 1:32, which is quite helpful if you want to have a good documentation as a basis for detailing. I'm also going to realise one of the WW variants, which I immediately liked: all in Dural/ NMF with only a minimal set of markings.
With these pictures I open the book report on Roden's Junkers D.1: I tried to extend the interior with some steel wire, the seat belts are from Eduard. For the detailing I downloaded the very interesting building instructions from Wingnut Wings for the large D.1 in 1:32, which is quite helpful if you want to have a good documentation as a basis for detailing. I'm also going to realise one of the WW variants, which I immediately liked: all in Dural/ NMF with only a minimal set of markings.
7 July, 09:03
bughunter
Watching!
I have done the short fuselage already, I hope one day I can do the long one too.
Is the engine painting finished? I can recommend the WNW manual for this, still available on WNW page.
Watching!
I have done the short fuselage already, I hope one day I can do the long one too.
Is the engine painting finished? I can recommend the WNW manual for this, still available on WNW page.
8 July, 20:44
Roland Sachsenhofer
Thanks for the tip - it's definitely a good one! The printed WNW instructions are next to me, so I want to use a little oily black on the top of the engine and add a little "brass"... But not only WNW instructions, also your excellent work is my reference.
Thanks for the tip - it's definitely a good one! The printed WNW instructions are next to me, so I want to use a little oily black on the top of the engine and add a little "brass"... But not only WNW instructions, also your excellent work is my reference.
9 July, 12:35
Roland Sachsenhofer
The fuselage of the D.1 is now closed, the only thing to be careful of was not to damage the corrugated sheet metal joints. A related issue arises with the leading edges of the wings: in my opinion, the prototype shows a continuous line around the leading edge.... this will be difficult to depict: I will try to get close to this with careful sanding and the same amount of reworking with a scalpel.
The fuselage of the D.1 is now closed, the only thing to be careful of was not to damage the corrugated sheet metal joints. A related issue arises with the leading edges of the wings: in my opinion, the prototype shows a continuous line around the leading edge.... this will be difficult to depict: I will try to get close to this with careful sanding and the same amount of reworking with a scalpel.
11 July, 07:09
bughunter
Yes to clean the wing seem is not that esay. I must admit I used also wings from another kit after I was not happy with the first try. I have both the long and short fuselage kits and the wings are the identical. But that shifts the problem only to a later date, when I will build the long one. A new Part PE set is waiting too 🙂
Yes to clean the wing seem is not that esay. I must admit I used also wings from another kit after I was not happy with the first try. I have both the long and short fuselage kits and the wings are the identical. But that shifts the problem only to a later date, when I will build the long one. A new Part PE set is waiting too 🙂
12 July, 16:49
Roland Sachsenhofer
Thank you for your words, mates! - I completely agree that this is not an easy topic! My approach, which you can see started here, is to work on the front edge of the profile with a triangular file. I didn't even try to bring the corrugated sheet metal runs of the top and bottom together - that would be far too small for me - but simply used the file edge many times.... Well, in my opinion it looks at least a little better now than before, so I'll try to make it a little more precise....
Thank you for your words, mates! - I completely agree that this is not an easy topic! My approach, which you can see started here, is to work on the front edge of the profile with a triangular file. I didn't even try to bring the corrugated sheet metal runs of the top and bottom together - that would be far too small for me - but simply used the file edge many times.... Well, in my opinion it looks at least a little better now than before, so I'll try to make it a little more precise....
14 July, 08:57
Roland Sachsenhofer
The Alclad metal colours mercilessly bring out all the flaws and imperfections, especially when everything has already been trimmed to a high gloss in preparation for applying the decals like here! The Wingnut Wings instructions describe an effect called 'tiger stripes' on the wing sheeting, which I recreated using various aluminium and dural colours.
The Alclad metal colours mercilessly bring out all the flaws and imperfections, especially when everything has already been trimmed to a high gloss in preparation for applying the decals like here! The Wingnut Wings instructions describe an effect called 'tiger stripes' on the wing sheeting, which I recreated using various aluminium and dural colours.
18 July, 11:56
bughunter
The stripes are great - can be noticed, but both shades still looks like aluminium which it was.
The stripes are great - can be noticed, but both shades still looks like aluminium which it was.
18 July, 14:53
Roland Sachsenhofer
Thank you very much, mates!
The opinion on the 'tiger stripes' really really pleases me in a very motivating way!
Thank you very much, mates!
The opinion on the 'tiger stripes' really really pleases me in a very motivating way!
18 July, 18:15
Ludvík Kružík
Roland, your model looks very good. I really like the interior of the plane and the engine. Also your rendition of the corrugated sheet metal looks very realistic. 👍
Roland, your model looks very good. I really like the interior of the plane and the engine. Also your rendition of the corrugated sheet metal looks very realistic. 👍
20 July, 14:02
Roland Sachsenhofer
Ludvik, thank you for this comment, giving me a push to get the finishing steps done!
Ludvik, thank you for this comment, giving me a push to get the finishing steps done!
21 July, 06:54
Roland Sachsenhofer
A few steps closer to a finish: working with Roden decals is always an adventure, happy end not guaranteed! The whole thing is spiced up by the corrugated metal nature.... Well, this is the result; I will of touch up up the unclean parts with a brush, but on the whole it will stay like this - now for the signs of use and wear!
A few steps closer to a finish: working with Roden decals is always an adventure, happy end not guaranteed! The whole thing is spiced up by the corrugated metal nature.... Well, this is the result; I will of touch up up the unclean parts with a brush, but on the whole it will stay like this - now for the signs of use and wear!
25 July, 08:01
Roland Sachsenhofer
Thank you! 🙂
The Junkers D.1 is slowly approaching its final appearance - and that didn't work out quite as well as I had imagined! But what the heck, there are some nice things, like the turnbuckles or the two MGs from Gespatch; I'm also happy with the solution for the typical Junkers handles and footrests: a thin, glued-on metal rod was covered with finely cut Tamiya tape as a ridge. Well. I am satisfied with this overall impression.
Thank you! 🙂
The Junkers D.1 is slowly approaching its final appearance - and that didn't work out quite as well as I had imagined! But what the heck, there are some nice things, like the turnbuckles or the two MGs from Gespatch; I'm also happy with the solution for the typical Junkers handles and footrests: a thin, glued-on metal rod was covered with finely cut Tamiya tape as a ridge. Well. I am satisfied with this overall impression.
26 July, 19:22
Ludvík Kružík
As the work progresses, Junkers grows in beauty. Thanks to decals and small details the model looks better. 👍
As the work progresses, Junkers grows in beauty. Thanks to decals and small details the model looks better. 👍
26 July, 22:09
Roland Sachsenhofer
The Junkers D.1 from Roden is now finished, in a way my corrugated metal test run for the somewhat larger Junkers F.13 from Mikro Mir. There are enough problem areas - and also a few insights into how I can proceed better with the F.13, but even so I am surprised by the 'photogenicity' of the little fighter from the last days of the First World War! The markings, which are limited to the bar crosses and two '11s' on the rear of the fuselage, come from the Wingnut Wings documents; they show an aircraft from October 1918, i.e. shortly before the end of the war. Remarkable (and also a reason for my choice) are the 'tiger stripes' due to different metal panelling on the wings, which show up in the right light. I hope you like the pictures, I really enjoyed building it!
The Junkers D.1 from Roden is now finished, in a way my corrugated metal test run for the somewhat larger Junkers F.13 from Mikro Mir. There are enough problem areas - and also a few insights into how I can proceed better with the F.13, but even so I am surprised by the 'photogenicity' of the little fighter from the last days of the First World War! The markings, which are limited to the bar crosses and two '11s' on the rear of the fuselage, come from the Wingnut Wings documents; they show an aircraft from October 1918, i.e. shortly before the end of the war. Remarkable (and also a reason for my choice) are the 'tiger stripes' due to different metal panelling on the wings, which show up in the right light. I hope you like the pictures, I really enjoyed building it!
30 July, 15:36
Nick Dragone
Excellent build and photography. It would have taken me months to build this. Nice work
Excellent build and photography. It would have taken me months to build this. Nice work
30 July, 16:07
Michael Kohl
very nice and convincing weathering. Great outdoor and hangar shots. A joy to watch.
very nice and convincing weathering. Great outdoor and hangar shots. A joy to watch.
30 July, 19:09
Arseny K.
Very inspirational in-progress and built model pictures! Exceptional example of modeling art 👏🏼
Very inspirational in-progress and built model pictures! Exceptional example of modeling art 👏🏼
31 July, 07:31
Neuling
Wellblech ....... das muß eine Junkers sein 🙂 Cool pictures and perfect build ..... this must be a Sachsenhofer
Wellblech ....... das muß eine Junkers sein 🙂 Cool pictures and perfect build ..... this must be a Sachsenhofer
31 July, 08:16
Roland Sachsenhofer
Hi mates, I am really impressed and greatly pleased with your comments - thank you very much for this encouragement and motivation! To receive such feedback from highly esteemed modellers means something and makes me.... well, a little bit proud!
Hi mates, I am really impressed and greatly pleased with your comments - thank you very much for this encouragement and motivation! To receive such feedback from highly esteemed modellers means something and makes me.... well, a little bit proud!
31 July, 09:06
Arseny K.
@Roland, can you please share the know-how on making those realistic background photos? Thank you
@Roland, can you please share the know-how on making those realistic background photos? Thank you
31 July, 10:04
Roland Sachsenhofer
That makes me very happy, thank you mates! Well, what tips would be useful?
The requisites for the shots in front of the coniferous forest consist of a ground plate, the different structures of which I created myself in the 'electrostatic way' with some vegetation, and a simple back plate with a very useful motif from 'Coastal Kits'.
I guess, the real trick lies in the composition of the images as well as in the photo post-processing in the form of a very precise light-dark adjustment by graduation, an equally careful adjustment of the contrast values and the colour tones... In the compositional structure of the photos, I always pay attention to the height of the horizon line. The following applies here: it must be at a 'human' height in order to produce a realistic image and: the vanishing points of parallel directions must lie on the horizon line, otherwise the image cannot appear realistic.
Another principle of this image composition is: get as close to the object as possible! The resulting distortions of the camera lens can - carefully and sensitively used - make the object appear larger and therefore more real, but a second effect is more important: the object is shown cropped due to the proximity. This increases the drama through the attraction of the immediate closeness and thus supports the image narrative.
The above illustrates my approach to picture making, I hope it didn´t bore -but has provided some answers to your question, Arseny?
That makes me very happy, thank you mates! Well, what tips would be useful?
The requisites for the shots in front of the coniferous forest consist of a ground plate, the different structures of which I created myself in the 'electrostatic way' with some vegetation, and a simple back plate with a very useful motif from 'Coastal Kits'.
I guess, the real trick lies in the composition of the images as well as in the photo post-processing in the form of a very precise light-dark adjustment by graduation, an equally careful adjustment of the contrast values and the colour tones... In the compositional structure of the photos, I always pay attention to the height of the horizon line. The following applies here: it must be at a 'human' height in order to produce a realistic image and: the vanishing points of parallel directions must lie on the horizon line, otherwise the image cannot appear realistic.
Another principle of this image composition is: get as close to the object as possible! The resulting distortions of the camera lens can - carefully and sensitively used - make the object appear larger and therefore more real, but a second effect is more important: the object is shown cropped due to the proximity. This increases the drama through the attraction of the immediate closeness and thus supports the image narrative.
The above illustrates my approach to picture making, I hope it didn´t bore -but has provided some answers to your question, Arseny?
31 July, 19:38
gorby
Thanks for the description of your photographic process Roland, very useful (I can do with all the help I can get. 😄 ). 👍
Thanks for the description of your photographic process Roland, very useful (I can do with all the help I can get. 😄 ). 👍
1 August, 07:09
Dieter Bihlmaier
Hallo Roland,
ich bin beim fotografieren meiner Modelle dazu übergegangen, meine Hintergründe vom Laptop auf den Fernseher zu übertragen. Das hat den Vorteil, daß man die Hintergrundgröße problemlos an das Modell anpassen kann.
Hier ein (leider unscharfes) Bild meiner Vorgehensweise: Bf-109 K-14 | Album by oldman
Gruß Dieter
Hallo Roland,
ich bin beim fotografieren meiner Modelle dazu übergegangen, meine Hintergründe vom Laptop auf den Fernseher zu übertragen. Das hat den Vorteil, daß man die Hintergrundgröße problemlos an das Modell anpassen kann.
Hier ein (leider unscharfes) Bild meiner Vorgehensweise: Bf-109 K-14 | Album by oldman
Gruß Dieter
1 August, 11:48
Ben M
Absolutely beautiful build and photography. The "tiger stripes" provide a nice bit of visual interest and realism. I enjoyed seeing this built by both you and bughunter. Working with the corrugated skin is interesting.
Absolutely beautiful build and photography. The "tiger stripes" provide a nice bit of visual interest and realism. I enjoyed seeing this built by both you and bughunter. Working with the corrugated skin is interesting.
1 August, 11:54
Dieter Bihlmaier
Hello Roland, When photographing my models, I switched to transferring my backgrounds from the laptop to the TV. This has the advantage that you can easily adjust the background size to the model.
Bf-109 K-14 | Album by oldman
Greetings Dieter
Hello Roland, When photographing my models, I switched to transferring my backgrounds from the laptop to the TV. This has the advantage that you can easily adjust the background size to the model.
Bf-109 K-14 | Album by oldman
Greetings Dieter
1 August, 11:55
Jean-Charles
empezó este artículo
empezó este artículo
U.S MRAP All Terrain Vehicle
M1240A1 M-ATV With full interior Rye Field Model (RFM) 1:35
5032 2019 Nuevos moldes 1 August, 11:55
Jay C
quiere este artículo
quiere este artículo
Canadian
Leopard 2A6M CAN with workable track links Rye Field Model (RFM) 1:35
RM-5076 2021 Nuevos moldes 1 August, 11:54
Vladica Jović@Dutch
Good afternoon, I am interested in this model, so I wanted to ask you, do you ship to Serbia and how much is the postage? Best regards, Vladica Jović.
Good afternoon, I am interested in this model, so I wanted to ask you, do you ship to Serbia and how much is the postage? Best regards, Vladica Jović.
4 June, 15:43
Dutch
Vladica, I found the kit in my stash. I will package it tonight and calculate a postal estimate to Serbia for you. Kind regards, Dutch
Vladica, I found the kit in my stash. I will package it tonight and calculate a postal estimate to Serbia for you. Kind regards, Dutch
8 July, 12:31
Vladica Jović
Let me know how much the postage would cost to Serbia, so I can see if I can afford it. Best regards, Vladica Jović.
Let me know how much the postage would cost to Serbia, so I can see if I can afford it. Best regards, Vladica Jović.
8 July, 16:39
Dutch
Vladica,
I packaged the kit as lightly and securely as possible, but the shipping estimate to Serbia is $35.60. Your total would be $50 USD. If you want it, please send my your complete name, shipping address and email address for the Customs form. Kind regards, Dutch
Vladica,
I packaged the kit as lightly and securely as possible, but the shipping estimate to Serbia is $35.60. Your total would be $50 USD. If you want it, please send my your complete name, shipping address and email address for the Customs form. Kind regards, Dutch
8 July, 22:09
Vladica Jović
Thanks for the info. Sorry, but that's a bit much for me. Tell me how much it would cost to ship that model to Chicago? I have a relative there, so I could ask him to send to his address. Best regards, Vladica Jović.
Thanks for the info. Sorry, but that's a bit much for me. Tell me how much it would cost to ship that model to Chicago? I have a relative there, so I could ask him to send to his address. Best regards, Vladica Jović.
8 July, 22:31
Vladica Jović
Okay, I'll contact my brother in Chicago today, to see if he's on vacation by chance and to agree on shipping. Please send me your Paypal account and your email address so that we can pay you and send you the address in Chicago. I will contact you as soon as I hear from my brother. Best regards, Vladica Jović.
Okay, I'll contact my brother in Chicago today, to see if he's on vacation by chance and to agree on shipping. Please send me your Paypal account and your email address so that we can pay you and send you the address in Chicago. I will contact you as soon as I hear from my brother. Best regards, Vladica Jović.
9 July, 07:15
Dutch
Vladica, Can we possibly trade? I know of a vendor in Serbia who sells UpRise decals. Can you purchase UpRise1:72 Douglas A-4E/F Skyhawk Stencils - UR72176 in Serbia? You could just mail them in an envelope with a stamp to me. If I mail the Mirage to Chicago = 2 UR72176. If I mail the Mirage to Serbia = 3 UR72176. you think that is a fair trade, please let me know. Kind regards, Dutch
Vladica, Can we possibly trade? I know of a vendor in Serbia who sells UpRise decals. Can you purchase UpRise1:72 Douglas A-4E/F Skyhawk Stencils - UR72176 in Serbia? You could just mail them in an envelope with a stamp to me. If I mail the Mirage to Chicago = 2 UR72176. If I mail the Mirage to Serbia = 3 UR72176. you think that is a fair trade, please let me know. Kind regards, Dutch
9 July, 12:06
Vladica Jović
In principle, it can. I'll stop by the Post Office afterwards to check how much the postage costs and I'll call the decal seller to ask if he has three in stock. I will contact you when I check it. Best regards, Vladica Jović.
In principle, it can. I'll stop by the Post Office afterwards to check how much the postage costs and I'll call the decal seller to ask if he has three in stock. I will contact you when I check it. Best regards, Vladica Jović.
9 July, 13:51
Vladica Jović
So I will buy you the 3 pcs of decals you asked for and send them to you, and you will send me Mirages to Serbia. I don't have to pay you anything. We will do so. Best regards.
So I will buy you the 3 pcs of decals you asked for and send them to you, and you will send me Mirages to Serbia. I don't have to pay you anything. We will do so. Best regards.
9 July, 13:55
Dutch
Vladica, Please give my your full name, address and email (for customs form). Kind regards, Dutch
Paul Wiegman
2615 S. Hawthorne Circle
Tampa, FL 33629
USA
email: vertol-107@hotmail.com
Vladica, Please give my your full name, address and email (for customs form). Kind regards, Dutch
Paul Wiegman
2615 S. Hawthorne Circle
Tampa, FL 33629
USA
email: vertol-107@hotmail.com
9 July, 13:58
Vladica Jović
My adress Is :
Vladica Jović
XI Krajiške divizije 41/37
11090 Beograd
Srbija
Telephone: +38163342511
E-mail: jovac6421@gmail.com
My adress Is :
Vladica Jović
XI Krajiške divizije 41/37
11090 Beograd
Srbija
Telephone: +38163342511
E-mail: jovac6421@gmail.com
9 July, 14:29
Vladica Jović
I just sent an inquiry to the dealer for the decals. I'm waiting for an answer. Best regards.
I just sent an inquiry to the dealer for the decals. I'm waiting for an answer. Best regards.
9 July, 14:30
Vladica Jović
I would just take a look at your decal offer tonight, maybe you have something I need, so I would pay you to send it all together, if I find something interesting.
I would just take a look at your decal offer tonight, maybe you have something I need, so I would pay you to send it all together, if I find something interesting.
9 July, 14:32
Vladica Jović
I just got a call from this man who sells decals. There is currently only one set in stock.
I just got a call from this man who sells decals. There is currently only one set in stock.
9 July, 15:03
Vladica Jović
He still doesn't know when he will get two more sets of those decals. What do you suggest ? Best regards.
He still doesn't know when he will get two more sets of those decals. What do you suggest ? Best regards.
9 July, 16:31
Dutch
Vladica,
I see the other two MIrage decals that you want. I can add those to the package. I can substitute the following UpRise decals:
(1) YF-23 Black Widow II, UpRise 1:144, UR144200;
(1) RA-5C Vigilante (RVAH-11) UpRise 1:144 UR14425;
(1) Boeing 707 KAL "First shooted" UpRise 1:144 URC14413
Or, if he carries CtA decals, then you could ask for:
(2) Boeing KC-135T Stratotanker Tail painted for a 100th anniversary 116th ARS, CtA Models (cut then add) 1:144 144073
Does that sound fair?
Kind regards,
Dutch
Vladica,
I see the other two MIrage decals that you want. I can add those to the package. I can substitute the following UpRise decals:
(1) YF-23 Black Widow II, UpRise 1:144, UR144200;
(1) RA-5C Vigilante (RVAH-11) UpRise 1:144 UR14425;
(1) Boeing 707 KAL "First shooted" UpRise 1:144 URC14413
Or, if he carries CtA decals, then you could ask for:
(2) Boeing KC-135T Stratotanker Tail painted for a 100th anniversary 116th ARS, CtA Models (cut then add) 1:144 144073
Does that sound fair?
Kind regards,
Dutch
9 July, 17:46
Vladica Jović
So you want the following decals:
UpRise1:72 Douglas A-4E/F Skyhawk Stencils - UR72176
(1) YF-23 Black Widow II, UpRise 1:144, UR144200;
(1) RA-5C Vigilante (RVAH-11) UpRise 1:144 UR14425;
(1) Boeing 707 KAL "First shot" UpRise 1:144 URC14413
So you want the following decals:
UpRise1:72 Douglas A-4E/F Skyhawk Stencils - UR72176
(1) YF-23 Black Widow II, UpRise 1:144, UR144200;
(1) RA-5C Vigilante (RVAH-11) UpRise 1:144 UR14425;
(1) Boeing 707 KAL "First shot" UpRise 1:144 URC14413
9 July, 18:08
Vladica Jović
Hello Friend ,
For me, you pack the following:
1. Mirage III Revell H-225
2, Israeli pre-1967 Aircraft & Helicopters
Mirage IIICJ, P-51D, Spitfire, Bell 205/206, S-58, Mosquito
Microscale | No. 72-105 | 1:72
3. Mirage - Part 02
Brazil, Venezuela & Egypt
FCM | No. 72-34 | 1:72
I would buy that, and I'll send you the decals. Is that possible? Best regards.
Hello Friend ,
For me, you pack the following:
1. Mirage III Revell H-225
2, Israeli pre-1967 Aircraft & Helicopters
Mirage IIICJ, P-51D, Spitfire, Bell 205/206, S-58, Mosquito
Microscale | No. 72-105 | 1:72
3. Mirage - Part 02
Brazil, Venezuela & Egypt
FCM | No. 72-34 | 1:72
I would buy that, and I'll send you the decals. Is that possible? Best regards.
9 July, 18:13
Vladica Jović
Hello Friend ,
For me, you pack the following:
1. Mirage III Revell H-225
2, Israeli pre-1967 Aircraft & Helicopters
Mirage IIICJ, P-51D, Spitfire, Bell 205/206, S-58, Mosquito
Microscale | No. 72-105 | 1:72
3. Mirage - Part 02
Brazil, Venezuela & Egypt
FCM | No. 72-34 | 1:72
I would buy that, and I'll send you the decals. Is that possible? Best regards.
Hello Friend ,
For me, you pack the following:
1. Mirage III Revell H-225
2, Israeli pre-1967 Aircraft & Helicopters
Mirage IIICJ, P-51D, Spitfire, Bell 205/206, S-58, Mosquito
Microscale | No. 72-105 | 1:72
3. Mirage - Part 02
Brazil, Venezuela & Egypt
FCM | No. 72-34 | 1:72
I would buy that, and I'll send you the decals. Is that possible? Best regards.
9 July, 18:50
Dutch
Hello Vladica,
I returned home early. I have located the two decals that you want and included them with the Mirage kit. I will mail the package tomorrow. You can send the UpRise and CtA decals when you get them all together. No hurry. Kind regards, Dutch
Hello Vladica,
I returned home early. I have located the two decals that you want and included them with the Mirage kit. I will mail the package tomorrow. You can send the UpRise and CtA decals when you get them all together. No hurry. Kind regards, Dutch
18 July, 21:43
Vladica Jović
Thank you very much. As soon as the seller informs me that the decals are ready for you, I will send them to you immediately. Best regards, Vladica Jović.
Thank you very much. As soon as the seller informs me that the decals are ready for you, I will send them to you immediately. Best regards, Vladica Jović.
19 July, 06:27
Vladica Jović
Thank you for sending the package. As soon as they contact me that they have arrived, I will immediately go to Pančevo to pick them up and send them to you. Trust me, it's not up to me. I will contact you when I receive your shipment. Best regards, Vladica Jović.
Thank you for sending the package. As soon as they contact me that they have arrived, I will immediately go to Pančevo to pick them up and send them to you. Trust me, it's not up to me. I will contact you when I receive your shipment. Best regards, Vladica Jović.
19 July, 20:21
Vladica Jović
Good day, I just wanted to let you know that the decals I ordered for you will arrive at the end of next week at my friend's place because I'm going on vacation next week, so I won't be in Belgrade. My friend will pick up the decals and I'll send them to you as soon as I get back from vacation. Best regards, Vladica Jović.
Good day, I just wanted to let you know that the decals I ordered for you will arrive at the end of next week at my friend's place because I'm going on vacation next week, so I won't be in Belgrade. My friend will pick up the decals and I'll send them to you as soon as I get back from vacation. Best regards, Vladica Jović.
1 August, 07:15
/es/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=es
35
35
/es/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo