EC135 ADAC

1
May 8, 2017
2
May 8, 2017
Very yellow.
3
May 11, 2017
Ready to start
4
May 11, 2017
How in the name of all that is good in the world should I be able to fit 10 grams of weight in this tiny part?
5
May 12, 2017
View of the cockpit controls.
6
May 12, 2017
Painted cockpit.
7
May 12, 2017
Painted cockpit.
8
May 14, 2017
Added the inner canopy of the cockpit. In the background you can see the base for the rotors.
9
May 14, 2017
Fuselage halves are painted, windows are drying.
10
May 16, 2017
Fuselage put together. Not a perfect fit, but close enough.
11
May 16, 2017
Fuselage put together. Not a perfect fit, but close enough.
12
May 16, 2017
Fuselage put together. Not a perfect fit, but close enough.
13
May 16, 2017
Fuselage put together. Not a perfect fit, but close enough.
14
May 16, 2017
Fuselage put together. Not a perfect fit, but close enough.
15
May 18, 2017
Added tailpiece.
16
May 21, 2017
Blue tail
17
May 21, 2017
Decals! And rotors!
18
May 21, 2017
Right side decals
19
May 21, 2017
The front window does not fit properly.
20
May 21, 2017
Look mom, I found a baby chopper! May I keep it?
21
May 21, 2017
Underside.
22
May 21, 2017
From the back.

Comentarios

1 8 May 2017, 06:14

Spanjaard
i have this one in my wishlist.... so i am quite interested....

9 May 2017, 06:24

Cortex
Good luck, I built this model, it's nice but pay attention to fuselage halves as they didn't click in smoothly in my case, and had to apply claps. I used Ammo Mig paint and after market decals.

10 May 2017, 02:36

Vincent Heemskerk
First problem: Add 10 grams of weight in a teeny tiny part. Hmm. Put some lead in it, but that weighed about 1 gram... I see problems in my future. 🙁

11 May 2017, 06:36

Spanjaard
maybe some depleted uranium?😉

11 May 2017, 14:37

Martin Oostrom
Like cortex said, beware when jouning the fuselage halves. Mine never got right (or finished)

11 May 2017, 14:38

Vincent Heemskerk
Thanks for the warming, Cortex and Martin.
Seats and stretcher are done.

12 May 2017, 09:45

Vincent Heemskerk
Fuselage halves are painted, cockpit is ready. When all is dry I'm going to join the fuselages halves. Let's see if I am more lucky than Cortex and Spanjaard...

15 May 2017, 05:48

Vincent Heemskerk
Fuselage put together. Not a perfect fit, but close enough.

16 May 2017, 08:26

Cortex
looks good, what color was used for yellow ?

17 May 2017, 05:16

Vincent Heemskerk
Vallejo Model Color Flat Yellow, number 70.953

18 May 2017, 06:19

Vincent Heemskerk
Chopper is done. I didn't have big problems with the fuselage halves, but that was in part because I put the rotor-base too low. If I fitted that a bit higher (where it should have been), the fuselage wouldn't have fit and the rotors would. Since I put it in low, the rotors couldn't get attached the proper way and are now quite vulnerable to breakage.
The front window didn't fit, and I had to cut away quite a bit at the bottom middle. No solution for the big gap at the top of the window, though. I could put some putty in it, but decided not to. Part laziness (already painted the thing), part because I thought I'd screw it up.
Itty bitty baby chopper. I like it.

21 May 2017, 11:55