base de datos de modelismo a escala | gestor de almacén
mikestomcat
Michael Hickey (mikestomcat)
AU

"Pete the Pom Inspector" B-24D

Comentarios

16 April 2018, 07:33
Björn Svedberg
A Liberator 🙂. I'm definitively following this!
16 April 2018, 17:18
Michael Hickey
Welcome aboard Bjorn.
16 April 2018, 21:33
Michael Hickey
Pull up a seat James, so far I've got the wings assembled. There's been a lot of filing and the sandpaper is getting a work out, but no putty yet.😢
18 April 2018, 02:49
Peter Hardy
Mick do you have an explanation on just what a Pom Inspector actually is or does? When I saw the title I immediately thought of the obvious but an American unit?
18 April 2018, 07:52
Peter Hardy
As you are a professional modeller and I have to go to work today I expect the research to be completed today and the link added to explain!
18 April 2018, 20:57
Michael Hickey
this is what I found

[img1]
 
18 April 2018, 21:51
Michael Hickey
Originally known as "Heaven Can Wait" flew the 1 Aug 43 Ploesti mission with the 44th BG / 506th BS (V), but aborted before the target and landed on Cyprus. Transferred to the 389th BG / 566th BS (EE W) at the beginning of Nov 43, and flew on combat operations through 26 Mar 44, then transferred to the 467th BG and became an assembly aircraft.
18 April 2018, 21:54
Spanjaard
i will not miss this one 🙂
18 April 2018, 22:12
Spanjaard
colorful assembly birds are really something else 🙂
18 April 2018, 22:12
Michael Hickey
Plenty of room on board this beast Spanjaard.
And for Peter & James, here is the meaning of "Pom"
The term Pom, as used by the Allies in the Second World War, is an abbreviation of the full term "Passed for Overseas Movement", which was stamped on the aeroplane's final inspection documents. The character of a pilot with a telescope is part of the unit crest of the 791st Bombardment
18 April 2018, 22:46
Peter Hardy
All is explained!! Mick you knew that all along didn't you. I did. I was just ... testing you!
19 April 2018, 02:01
Spanjaard
me too.
19 April 2018, 05:14
Michael Hickey
I like to know a little about each aircraft I build, where I can.😢
19 April 2018, 06:16
Peter Hardy
I tend to do it the other way around. I get all engrossed in a subject, read all I can, then give in to the urge to build it. That's what I gave in to the PoW and the Tigers.
19 April 2018, 09:57
Michael Hickey
I really enjoy it when I'm researching a subject because sometimes the kit is not always quite accurate.
19 April 2018, 14:26
Peter Hardy
Kits are NEVER accurate! Impossible to design I think! What got me into modelling was the desire to 'fix' the inaccuracies in my fleet of 8 remote control 1/16 scale tanks. But, sigh, I got hooked on the hobby and the 8 tanks just sit, ignored and gathering dust.
19 April 2018, 21:00
Michael Hickey
At least your in the hobby.
20 April 2018, 02:36
Peter Hardy
Alas Michael you are wrong, the hobby is in ME!!!!!
20 April 2018, 02:37
Michael Hickey
Yeah your right, it's running through all our viens.😢
20 April 2018, 02:42
Michael Hickey
By the way what did Future look like here down under, I know it's in a yellow bottle sold at Bunnings but that's all I can remember.
20 April 2018, 02:43
Peter Hardy
All I could find out Mick was that Pledge isn't sold here anymore. It had to be "finish" I believe.
20 April 2018, 05:20
Spanjaard
you can get it via internet from the US... I did that, although is was expensive to ship here. well, actually the only reasonsable price one, was one that was only shipping to UK, France or Germany. thank god i have family in France
20 April 2018, 06:04
Michael Hickey
Thanks guys.
20 April 2018, 06:08
Michael Hickey
This is the stuff I was on about sold at Bunnings for 12 bucks for a litre.
bunnings.com.au/long..loor-polish_p4460498
20 April 2018, 06:14
Spanjaard
well, if you have the same stuff at home, no point in bringing it from abroad 🙂
20 April 2018, 06:32
Peter Hardy
It must be really good because it says it is "Improved".
20 April 2018, 07:33
Michael Hickey
I haven't tried it yet, I'll try to get a bottle tomorrow and use it on the bee or 110.
20 April 2018, 09:10
Spanjaard
Try first on some old model.... And leave it a few days before using it in a model that you care
20 April 2018, 09:21
Michael Hickey
Yeah probably good advice there mate, problem is I don't have any practice models to play with. The ones I had my 2 daughters played with when they were younger and have since long been trashed.
20 April 2018, 12:04
Spanjaard
Get nearest model or toy shop, get the cheapest crap they have😉
Or get a bottle of cola, prime it, paint it, see what happens
20 April 2018, 14:04
Spanjaard
Even plastic disposable spoons can do the trick
20 April 2018, 14:05
Peter Hardy
Yeah, the spoons are great as they have seams at the edge and you can work out the wash concentration too.
20 April 2018, 21:51
Michael Hickey
Hey I like spooning, I mean spoons, think I'll go with that idea, thanks fellas.
21 April 2018, 01:31
Peter Hardy
Cheap too!
21 April 2018, 04:06
Michael Hickey
👍
21 April 2018, 05:48
Michael Hickey
I've now managed to get the wings ready for airbrushing. Now to paint the cockpit and close the fuselage up.
23 April 2018, 22:30
Jens
Hello Michael, I like to watch, spatula seems to be a basis for all models for you 😉 🙂 👍
23 April 2018, 22:34
Michael Hickey
Well to be honest I haven't used any putty on the wings at all. The leading edge of the wings was quite a good join, just the nacelles were a bit annoying. They each had a small step and slight gap at the wing root. I glued the cowls in place and sanded them, after that I ran super glue on all the engine joins, I did that twice and now there ready for the paint shop.
24 April 2018, 02:16
Michael Hickey
With careful attention to dry fitting and joining of parts together, there not that bad. I plan on doing the B-17G a little bit down the track.
24 April 2018, 02:27
Michael Hickey
I painted the engine nacelles, but there are still a couple of hair line seams here and there.🙁
24 April 2018, 10:38
Peter Hardy
Doesn't that rot your socks! I have the same thing with a USS Enterprise! Get it all painted and then you find more cracks!
24 April 2018, 10:43
Tim Heimer
Say no to crack! LOL
24 April 2018, 12:32
Peter Hardy
Tim, I am shaking my head right now!
25 April 2018, 00:16
Jens
Peter, against fine cracks you have hsc-modell.ospan.de/..hp?products_id=27321, something in the closet, after all the trouble to disfigure or devastate a model with spatula, makes that at least for the colors again a useful surface 😉
25 April 2018, 04:53
Peter Hardy
Thanks Jen's, I will order some and see if it cures my model's illness!
25 April 2018, 05:39
Jens
Not the models are sick, we are that we do it again and again 😄 😄 😄
25 April 2018, 07:13
Michael Hickey
Yeah, it really peeves me off, thanks for the link Jens, I ordered some from BNA down in Melbourne. Should be here by next Tuesday or Wednesday.
25 April 2018, 09:34
Jens
@ Michael, it is not a miracle weapon but it helps 👍 I paint thin layers and then sand it wet, for metal surfaces the optimal reason
25 April 2018, 09:46
Peter Hardy
Just placed an order with BNA myself. Thanks again Jens!
25 April 2018, 10:58
Jens
No thanks necessary, I'm glad if I can pass on some experience and make the models better than mine from the start 🙂
25 April 2018, 11:24
Peter Hardy
That's not likely!
25 April 2018, 20:40

Album info

This is the late version of this B-24D "Pete the Pom Inspector". She was painted like this for the 467th Bombardment Group and became the first assembly aircraft of the group. She was damaged at RAF Rackheath following a landing roll out accident when the nose wheel retracted. She was then scrapped at Rackheath.

4 imágenes
1:48
En espera
Scratchbuilt
Consolidated B-24D Liberator
US US Army Air Forces (1941-1947)
467 BG, 8 AF 42-40370/pete The Pom Inspector
Octubre 44
 

Todos los álbumes

Ver todos los álbumes »