Jet Provost T.3 double build
Comentarios
13 22 December 2020, 20:22
![](/profiles/img/12780-s.jpg)
Very nice job on your cockpit! I wish I had seen yours before I finished mine, I could have copied! Ha ha!
23 December 2020, 06:05
![](/profiles/img/46361-416-s.jpg)
Nice so far,check your reference as you have a pic of T5 which was heavier.(pressurised cockpit).
23 December 2020, 14:08
![](/profiles/img/10028-s.jpg)
@David Taylor, I know. Unfortunately Warpaint only has drawings of T.3 and 4 with retracted gear. But I assume that they have the same tire size.
23 December 2020, 14:18
![](/profiles/img/10028-s.jpg)
@Keith: You say that one should avoid the dayglo decals. What's wrong with them?
23 December 2020, 15:56
![](/profiles/img/12780-s.jpg)
@Felix: They worked great on the flat surfaces, but are very thick and brittle. I tried every trick I knew but never got them soft enough to bend/conform to the leading edge of the wing. Instead they cracked into small pieces, and color was near impossible to match.
25 December 2020, 07:18
![](/profiles/img/10028-s.jpg)
@Keith: Thanks for your warning. Luckily, I have two sheets. I'll try my best with all the chemicals I have.
25 December 2020, 10:15
![](/profiles/img/10028-s.jpg)
@Bernhard: Yeah again but worse than ever. Feel that I start from zero again
5 January 2021, 10:48
![](/profiles/img/13641-502-s.jpg)
Never seen the Blufix stuff myself, but watch out whether it doesn't dry inside the box. See my Rocket UV Glue adventure with Caravelle:
[img1]
Caravelle F-BJTR "Principauté de Monaco" | Album by Woody (1:144)
5 January 2021, 11:00
Album info
Parallel build of Airfix' recent Jet Provost. Although one is the T.4 boxing, both will be T.3 at the end. Both will get the kit decals from AX02103: One will be aircraft grey/ dayglo from No.2 FTS at RAF Gaydon, the other will be red/white from No. 1 FTS at RAF Linton-on-Ouse.