base de datos de modelismo a escala | gestor de almacén
Warhawk55
Christoph Schnarr (Warhawk55)
DE

BAe Hawk 208

Comentarios

33 31 May 2021, 16:21
Christoph Schnarr
Following my wish for a simple model project, I chose the Hawk 200 kit from Hobby Boss. The assembly is largely carried out oob. Only the cockpit has been upgraded a little with a few details (ejection seat, control stick, rudder pedals and thrust lever) from an old neomega conversion kit for the Hawk 200.
31 May 2021, 16:23
Thomas Wirsching
Hallo Christoph, nice efforts so far. I also have this one in stash waiting for a start. I know these aircraft have canopy seals and MDC Cords to break the plexiglass cockpit if the pilot uses the ejection seat but regrettably Hobbyboss dont have this within the decals. Do you have a plan to present these MDC Cords at your canopy and if yes how?

Grüße

Thomas
31 May 2021, 16:51
Christoph Schnarr
Thank you Thomas! I also appreciate a reasonable representation of the MDC cords as a bit problematic. For the cords the kit actually comes with decals, but instead I have currently ordered the Set „148004 BAE Hawk Canopy Seals and MDC Cords for Hobby Boss" from Phase Hangar Resin as an alternative.
31 May 2021, 17:41
James C
That's some impressive looking detail work 👍
31 May 2021, 17:53
Christoph Schnarr
Thank you James 👍
1 June 2021, 16:17
Mirko Römer
Very nice cockpit work of a rare subject, following!
2 June 2021, 18:15
Christoph Schnarr
Thank you Mirko 👍 The painting has now started.
3 June 2021, 16:29
Christoph Schnarr
The painting of the Hawk is finished. Now some minor finishing work will follow and then the final assembly. The markings show a Hawk 208 of the Tentera Udara Diraja Malaysia (Royal Malaysian Air Force) from the mid-1990s.
11 July 2021, 15:42
Thomas Wirsching
Großartig! I like it very much so far. Curious how the finished model will look. Do you plan to attach a pilot figure with it?
13 July 2021, 15:32
Christoph Schnarr
Thank you Thomas. I hope to have the model ready this week. However, I have not planned a pilot figure.
13 July 2021, 18:23
Bernd Korte
Very interesting aircraft and nice model! I have to admit I wasn't particularly aware of this single seat Hawk!
13 July 2021, 19:00
Christoph Schnarr
Thanks to you Bernd 👍
The Hawk 200 series has always interested me because of its shape. I had already bought the Neomega conversion set for the Airfix model years ago. But with the release of the Hobby Boss kit, building a Hawk 200 has now become much easier. In total, BAe has built more than 60 of these aircraft, which have been operated since the mid-1990s by the air forces of Indonesia and Oman, as well as Malaysia,
14 July 2021, 04:40
Christoph Schnarr
Ready 😄
19 July 2021, 17:57
Alex Rodionov
Superb painting and weathering. ?
19 July 2021, 18:04
Thomas Wirsching
Großartig geworden ??
19 July 2021, 18:52
Mirko Römer
Richtig schönes Modell, toll geworden!
19 July 2021, 19:00
Christoph Schnarr
Thank you very much / vielen Dank Mates 👍
20 July 2021, 04:45
Oliver Peissl
Very nice result!
20 July 2021, 10:00
Christoph Schnarr
Thank you, Oliver 👍
20 July 2021, 14:48
Vjekoslav Ranec
Beautiful work
20 July 2021, 15:13
Christoph Schnarr
Thank you very much, Vjekoslav 👍
21 July 2021, 09:17
Pierre-Christian Baudru
GREAT JOB !!!
21 July 2021, 10:43
Christoph Schnarr
Thank you, Pierre-Christian 👍
21 July 2021, 14:44

Project info

49 imágenes
1:48
Terminado
1:48 Hawk 200 (NeOmega C57)1:48 BAE Hawk (AIRFRAME Decals AF-48115)1:48 BAe Hawk Mk.200/208/209 (HobbyBoss 81737)

Todos los álbumes

Ver todos los álbumes »