Uutisvirta
Phenix Outis
omistaa tämän kohteen
omistaa tämän kohteen
2A42 30 mm cannon for Ka-50 Ka-52 helicopter (3D printing + turned barrel)
GE Models 1:48
48022 202x Uusi työkalu Multi-aihe (1!!)16 September, 11:31
Rando
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
67 kuvien
CVW-16 Crusaders double build: RF-8G with F-8E escortUusi: 15 September, 18:37 1:72
projekti: CVW-16 Vought RF-8G & VF-111 F-8E escort
80 26 February, 14:43
Rando
Been cooking up this idea since I got the 1/72 RF-8. My original plan was to build the plane in the cover of the Osprey RF-8 book, flown by Lt Andre Coltrin over Vietnam. With a little help from a 1/72 version of the Furball MiG Master sheet, I will rearrange the nose and tail numbers to make BuNo 146871 as it flew in Vietnam during its 1966 cruise off the USS Oriskany.
I also found an Academy F-8E, which has decals for a VF-111 jet that flew on the same cruise, so decided I will build it as the RF-8's escort, which they often had during their photo runs. I also figured, why not build them together? They will be displayed in flight.
Been cooking up this idea since I got the 1/72 RF-8. My original plan was to build the plane in the cover of the Osprey RF-8 book, flown by Lt Andre Coltrin over Vietnam. With a little help from a 1/72 version of the Furball MiG Master sheet, I will rearrange the nose and tail numbers to make BuNo 146871 as it flew in Vietnam during its 1966 cruise off the USS Oriskany.
I also found an Academy F-8E, which has decals for a VF-111 jet that flew on the same cruise, so decided I will build it as the RF-8's escort, which they often had during their photo runs. I also figured, why not build them together? They will be displayed in flight.
26 February, 22:47
Rando
Good to have you gents, looking to start this one soon! I like researching and adding reference photos, so I just added some in the meantime.
Good to have you gents, looking to start this one soon! I like researching and adding reference photos, so I just added some in the meantime.
29 March, 13:32
Jos Jansen
Normally I don't follow 1:72 scale models...for this one I'll make an exception...😅😉, grab myself a seat here! Love those Crusaders...
Normally I don't follow 1:72 scale models...for this one I'll make an exception...😅😉, grab myself a seat here! Love those Crusaders...
23 April, 12:53
Patrick Hagelstein
Got intrigued by Rando's comment on Jos' build, so I popped over here. Looks like a very interesting build as well!
Got intrigued by Rando's comment on Jos' build, so I popped over here. Looks like a very interesting build as well!
23 April, 13:10
Rando
Happy to have you gents here, I'll be getting to this one just as soon as my elaborate P-51 build is done...
Happy to have you gents here, I'll be getting to this one just as soon as my elaborate P-51 build is done...
24 April, 14:14
Rando
Here we go, double Crusader build. Gonna be comparing the short-run Sword RF-8 with Academy's F-8, which has been the go-to in 1/72. I have extra Academy kits so I'm swapping out the RF-8 kit's nice resin seat, I'll use it for a future open canopy build. The pilots will be obscuring seat detail in a closed canopy anyway.
Here we go, double Crusader build. Gonna be comparing the short-run Sword RF-8 with Academy's F-8, which has been the go-to in 1/72. I have extra Academy kits so I'm swapping out the RF-8 kit's nice resin seat, I'll use it for a future open canopy build. The pilots will be obscuring seat detail in a closed canopy anyway.
15 May, 03:54
Rando
Welcome David!
I assembled the PJ pilots and started nipping off parts to assemble the fuselage. Getting the pilots to fit in their seats is tricky so far. Fit on the Academy kit parts is pretty nice. Sword kit is not as easy since there's no locator pins but they align well
Welcome David!
I assembled the PJ pilots and started nipping off parts to assemble the fuselage. Getting the pilots to fit in their seats is tricky so far. Fit on the Academy kit parts is pretty nice. Sword kit is not as easy since there's no locator pins but they align well
19 May, 04:25
Rando
Pilots are fully painted now. The F-8E pilot is based on Dick Schaffert, who was a pilot on this 1966 cruise. While I don't know of any specific plane he flew, F-8 pilots often flew jets that were assigned to others, so he's flying 149180 on this escort mission. In order to accommodate them, I had to remove the rudder pedals and front of the cockpit tub on the F-8E. It won't really be visible when the cockpit is buttoned up anyway.
Pilots are fully painted now. The F-8E pilot is based on Dick Schaffert, who was a pilot on this 1966 cruise. While I don't know of any specific plane he flew, F-8 pilots often flew jets that were assigned to others, so he's flying 149180 on this escort mission. In order to accommodate them, I had to remove the rudder pedals and front of the cockpit tub on the F-8E. It won't really be visible when the cockpit is buttoned up anyway.
27 May, 14:17
Rando
I didn't like how the Sundowner helmet turned out so I stripped the paint and airbrushed it this time with tiny wedges of tape, then shaped and touched up everything. Just need to add a black stripe for the visor groove.
I didn't like how the Sundowner helmet turned out so I stripped the paint and airbrushed it this time with tiny wedges of tape, then shaped and touched up everything. Just need to add a black stripe for the visor groove.
29 May, 03:49
Rando
Thanks and glad to have you J35J! Pilots, seats, ejection handles, and joysticks are all in place. Time soon to start putting the jets together.
Thanks and glad to have you J35J! Pilots, seats, ejection handles, and joysticks are all in place. Time soon to start putting the jets together.
31 May, 04:40
Rando
Hello Guy, welcome 😊
Fuselages are together. Now getting all the panels and gear bay doors to sit flush.
Hello Guy, welcome 😊
Fuselages are together. Now getting all the panels and gear bay doors to sit flush.
8 June, 04:20
Rando
Thanks Calvin! It's quite nice if you remember it's a short run kit and you prep and test fit parts a lot before gluing anything. Has been a far from perfect first effort by me but I like how it goes together. It's shape is pretty accurate too. The Academy kit is very plug-n-play in comparison
Thanks Calvin! It's quite nice if you remember it's a short run kit and you prep and test fit parts a lot before gluing anything. Has been a far from perfect first effort by me but I like how it goes together. It's shape is pretty accurate too. The Academy kit is very plug-n-play in comparison
8 June, 19:52
Rando
Welcome S M! I have been painstakingly installing the gear doors closed. Stuffing blutack in the wheel wells helps with frustration. Both F-8s have tiny aft gear doors on the main bays that took a lot of time to line up. The RF-8's nose doors were also very tricky. Happy to say I'm done getting the gear doors on.
Welcome S M! I have been painstakingly installing the gear doors closed. Stuffing blutack in the wheel wells helps with frustration. Both F-8s have tiny aft gear doors on the main bays that took a lot of time to line up. The RF-8's nose doors were also very tricky. Happy to say I'm done getting the gear doors on.
22 June, 04:14
Casey Beckett
Me too - Bonanza gear struts. God bless Albion Alloys. Great stuff if you've not used any of their items.
Me too - Bonanza gear struts. God bless Albion Alloys. Great stuff if you've not used any of their items.
23 June, 19:39
Rando
I have not but am always looking to add new things in this hobby, I'll check them out! I actually have an old Minicraft 1/48 Bonanza that I might do something with one of these days.
I have not but am always looking to add new things in this hobby, I'll check them out! I actually have an old Minicraft 1/48 Bonanza that I might do something with one of these days.
23 June, 20:49
Rando
Took a big long tour on the clear parts struggle bus this past week. Got glue smudges on a camera window, the windscreen, and canopy on the RF-8, which all had to be buffed out. Hopefully I get the canopies attached snug without issues tomorrow night. Finding that carefully lining the attachment point with Revell Contacta on a toothpick is less risky than TET.
Took a big long tour on the clear parts struggle bus this past week. Got glue smudges on a camera window, the windscreen, and canopy on the RF-8, which all had to be buffed out. Hopefully I get the canopies attached snug without issues tomorrow night. Finding that carefully lining the attachment point with Revell Contacta on a toothpick is less risky than TET.
28 June, 03:57
Michael Kohl
Like the planes. Like to see them in flighr. Like the effort you put in.
Feel you when putting pilots properly in and closing wheel well doors.
Anxious for the paint job.
Like the planes. Like to see them in flighr. Like the effort you put in.
Feel you when putting pilots properly in and closing wheel well doors.
Anxious for the paint job.
1 July, 04:07
Rando
Thanks all, getting closer to painting. A ton of work has gone into smooth out and scribe the lines around the gear bays on both jets, not to mention persistent seams. Also turned my attention to sanding down and rescribing the fictitious bumps on the folding joints, which the RF-8 has as well. The RF-8 also has wedge-shaped plates on the droops, which were only present much later, so those were sanded down as well. There's still a few things I want to try to perfect before I begin painting. I also have to decide if I want to paint the wings separately, in all likelihood I'm going to glue them on first because I want the fuselage section to be flush.
Thanks all, getting closer to painting. A ton of work has gone into smooth out and scribe the lines around the gear bays on both jets, not to mention persistent seams. Also turned my attention to sanding down and rescribing the fictitious bumps on the folding joints, which the RF-8 has as well. The RF-8 also has wedge-shaped plates on the droops, which were only present much later, so those were sanded down as well. There's still a few things I want to try to perfect before I begin painting. I also have to decide if I want to paint the wings separately, in all likelihood I'm going to glue them on first because I want the fuselage section to be flush.
21 July, 02:23
Rando
Alright, wings are on. I feel like this will make masking more complicated, but better for making sure they conform to the fuselage. I am so ready to paint these jets
Alright, wings are on. I feel like this will make masking more complicated, but better for making sure they conform to the fuselage. I am so ready to paint these jets
8 August, 03:55
Nicolas
I missed this one, following. I love these side by side builds.
Great progress so far. 👍
I missed this one, following. I love these side by side builds.
Great progress so far. 👍
9 August, 05:14
Rando
Hi friends three months later I'm finally painting the damn things. Here's my current take on preshading, blackbasing, what have you. Gave the white areas a white base that I preshaded with dark gull grey. Then mottled the black with white for some variation with the light gull grey. Elsewhere I built the missiles, launch rails, and painting the horizontal stabs.
Hi friends three months later I'm finally painting the damn things. Here's my current take on preshading, blackbasing, what have you. Gave the white areas a white base that I preshaded with dark gull grey. Then mottled the black with white for some variation with the light gull grey. Elsewhere I built the missiles, launch rails, and painting the horizontal stabs.
16 August, 04:18
Thomas Kolb
Coming along nicely! Your blackbasing tedhnique looks very effective, I am curious how they will turn out!
Coming along nicely! Your blackbasing tedhnique looks very effective, I am curious how they will turn out!
16 August, 05:04
Rando
I've painted the undersides of the CVW-16 birds. Unfortunately I did something stupid, something I even decided against at first--I tried doing a "pour" into the intakes to get them painted. This was a bad idea for the RF-8 in particular. I thought that since they were glued together I could get away with no leaks, but I saw the paint level draining, and I knew the paint would appear inside the camera windows. Lo and behold I saw paint when I peeked under the masks.
Feels horrible that I did this, even if I have some ways I could fix them. I can pop the side windows out and clean the bottom side windows, but putting them back in will be a pain since the side windows are meant to be attached from the inside. UGH. Any clever ideas to fix this mess are welcome, this is definitely one of those "mojo killers."
I've painted the undersides of the CVW-16 birds. Unfortunately I did something stupid, something I even decided against at first--I tried doing a "pour" into the intakes to get them painted. This was a bad idea for the RF-8 in particular. I thought that since they were glued together I could get away with no leaks, but I saw the paint level draining, and I knew the paint would appear inside the camera windows. Lo and behold I saw paint when I peeked under the masks.
Feels horrible that I did this, even if I have some ways I could fix them. I can pop the side windows out and clean the bottom side windows, but putting them back in will be a pain since the side windows are meant to be attached from the inside. UGH. Any clever ideas to fix this mess are welcome, this is definitely one of those "mojo killers."
19 August, 15:30
Rando
Think I fixed the windows. The bottom windows will still be a little smudgy. But I was able to get the sides back in by gluing a toothpick to the mask and rotating it from the inside, then seating it on the frame.
Think I fixed the windows. The bottom windows will still be a little smudgy. But I was able to get the sides back in by gluing a toothpick to the mask and rotating it from the inside, then seating it on the frame.
20 August, 04:12
Rando
After fussing with the white for what seemed like forever, I finally masked to paint the gull grey. Unfortunately this revealed a ghost seam on the spine, so on the plastic putty goes. Hopefully it goes away.
After fussing with the white for what seemed like forever, I finally masked to paint the gull grey. Unfortunately this revealed a ghost seam on the spine, so on the plastic putty goes. Hopefully it goes away.
30 August, 05:14
Rando
Fortunately I was able to defeat them with putty and paint! It's just crazy they'd show up after working on all the seams and surfaces for the past few months. I also removed the ECM blister from the VF-111 jet's tail, since reference photos and instructions showed they didn't have them at the time.
Fortunately I was able to defeat them with putty and paint! It's just crazy they'd show up after working on all the seams and surfaces for the past few months. I also removed the ECM blister from the VF-111 jet's tail, since reference photos and instructions showed they didn't have them at the time.
30 August, 22:50
Rando
Fussing a lot with the color of the nose tip. Also very difficult to mask off. Lots of touching up needed. The tip seems either a tan or greyish hue, but I have no photos to base it on.
Fussing a lot with the color of the nose tip. Also very difficult to mask off. Lots of touching up needed. The tip seems either a tan or greyish hue, but I have no photos to base it on.
5 September, 16:51
Rando
Thanks guys! Cleaned up the paint edges on the nose and feel a lot better about how it looks now. Also painted an anti-glare area in front of the camera fairing. Just gotta paint the tailpipes and it's on to clear coat and decals!
Thanks guys! Cleaned up the paint edges on the nose and feel a lot better about how it looks now. Also painted an anti-glare area in front of the camera fairing. Just gotta paint the tailpipes and it's on to clear coat and decals!
6 September, 12:06
Thomas Kolb
They look really great! I have to say, the F-8 is one fine looking aircraft and your models definitely do them justice. I cannot wait to see them with decals! About ghost seams, I have seen them appearing on my models weeks after they are finished. I guess it's the cement seam cracking a little bit because of tensions in the plastic, but I have long since stopped worrying about it.
They look really great! I have to say, the F-8 is one fine looking aircraft and your models definitely do them justice. I cannot wait to see them with decals! About ghost seams, I have seen them appearing on my models weeks after they are finished. I guess it's the cement seam cracking a little bit because of tensions in the plastic, but I have long since stopped worrying about it.
9 September, 05:05
Rando
Thanks Thomas! I appreciate that, I'm super anxious to start the decals myself, going to be the most rewarding part of the whole project. Still had some touchups and wanted to paint the leading edges of the flight surfaces with flat aluminum to represent Coroguard. Clear coats go on *I hope* tonight.
Gotta say, building two planes at once sure is a different kind of challenge and test of your patience. It's fortunate that they are mostly the same, but it's still time consuming to do everything twice. I spent at least an hour masking off the leading edges and it took all of five minutes to paint! Probably won't be doing a double build again for quite awhile.
Thanks Thomas! I appreciate that, I'm super anxious to start the decals myself, going to be the most rewarding part of the whole project. Still had some touchups and wanted to paint the leading edges of the flight surfaces with flat aluminum to represent Coroguard. Clear coats go on *I hope* tonight.
Gotta say, building two planes at once sure is a different kind of challenge and test of your patience. It's fortunate that they are mostly the same, but it's still time consuming to do everything twice. I spent at least an hour masking off the leading edges and it took all of five minutes to paint! Probably won't be doing a double build again for quite awhile.
9 September, 13:08
Rando
One side of the decals mostly done. Buncha stencils to do also. I'm super paranoid about breaking the ventral fins so I stood them up on wads of blutack which works pretty well.
One side of the decals mostly done. Buncha stencils to do also. I'm super paranoid about breaking the ventral fins so I stood them up on wads of blutack which works pretty well.
11 September, 04:16
Rando
Finished these two last minute so I could enter them at Patcon 2024 in Hudson, MA. Was my first ever model show and it was a blast. I'll be uploading better photography of these soon, but figured it would be cool to share some pics of them at the contest. Really like how they've come together, they look so cool in formation like this
Finished these two last minute so I could enter them at Patcon 2024 in Hudson, MA. Was my first ever model show and it was a blast. I'll be uploading better photography of these soon, but figured it would be cool to share some pics of them at the contest. Really like how they've come together, they look so cool in formation like this
15 September, 22:36
Never a Pro
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
70 kuvien
Eduard 1/48 Sopwith Triplane - WIPUusi: 16 September, 11:17 1:48
tried the decals. They don't release from the paper, and are very fragile. I couldn't salvage this one, so this is going...
projekti: Sopwith Triplane "Hilda"
27 27 October 2023, 14:24
bughunter
Oh, that is a very old kit. I have built a newer edition. Not sure, if the plastic parts was identical tool. The PE sheet was bigger.
Oh, that is a very old kit. I have built a newer edition. Not sure, if the plastic parts was identical tool. The PE sheet was bigger.
27 October 2023, 14:39
Never a Pro
I know, I have seen your great build. This one will also be a Collinshaw's "black maria" with decals borrowed from a Camel.
I got this one from a guy in Switzerland, with my luck Eduard will retool it after I am done with this and sell it for half the price I paid for this one.
The detail looks acceptable, but I will have to do some improvements (aileron check windows, machine gun, cockpit, etc). The plastic quality is not great, but decals are impeccable.
I know, I have seen your great build. This one will also be a Collinshaw's "black maria" with decals borrowed from a Camel.
I got this one from a guy in Switzerland, with my luck Eduard will retool it after I am done with this and sell it for half the price I paid for this one.
The detail looks acceptable, but I will have to do some improvements (aileron check windows, machine gun, cockpit, etc). The plastic quality is not great, but decals are impeccable.
27 October 2023, 15:07
Michael Kohl
me too. I have a scale 1:72 for a bigger project in my stash. I am keen on your experiences.
me too. I have a scale 1:72 for a bigger project in my stash. I am keen on your experiences.
9 February, 09:38
Never a Pro
1:72 Sopwith sounds punishing. I am already on my limits in tolerating tiny PE pieces
1:72 Sopwith sounds punishing. I am already on my limits in tolerating tiny PE pieces
9 February, 11:47
TH SCALE MODELS (Thomas Haberl)
Awesome progress so far. Would never be patient enough to do these kind of rigging ... never! How often did something fly around your bench? 😁😁
Awesome progress so far. Would never be patient enough to do these kind of rigging ... never! How often did something fly around your bench? 😁😁
9 February, 12:17
Never a Pro
I like rigging with EZ line, it is the cherry on top of a beautiful WWI kit
I like rigging with EZ line, it is the cherry on top of a beautiful WWI kit
12 February, 14:06
Ben M
I've occasionally had luck with painting "microscale liquid decal film" on before using old decals. For the tail you can mask and paint the stripes pretty easily, I'd do the whole tail white and then do the red and blue. In the case where replacement decals cannot be obtained I've had luck scanning them and sending the scan to these folks: stsdecals.com/
I'm also going to try making my own decals for a project soon.
Anyway, as someone who builds old kits, the decal problem is one very familiar to me. Good luck!
I've occasionally had luck with painting "microscale liquid decal film" on before using old decals. For the tail you can mask and paint the stripes pretty easily, I'd do the whole tail white and then do the red and blue. In the case where replacement decals cannot be obtained I've had luck scanning them and sending the scan to these folks: stsdecals.com/
I'm also going to try making my own decals for a project soon.
Anyway, as someone who builds old kits, the decal problem is one very familiar to me. Good luck!
16 September, 11:27
Phenix Outis
omistaa tämän kohteen
omistaa tämän kohteen
FAB-500 M-54 High-Explosive 500 kg bomb
Amigo Models 1:48
АМС 48018 16 September, 11:22
Phenix Outis
omistaa tämän kohteen
omistaa tämän kohteen
FAB-500 M-62 High-Explosive 500 kg bomb
Amigo Models 1:48
АМС 48019 16 September, 11:22
Phenix Outis
omistaa tämän kohteen
omistaa tämän kohteen
OFAB-250 fragmentation-fuzed aviation bomb
RESArm 1:48
RES48-01001 16 September, 11:21
Martin Hronsky
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
3 18 December 2016, 00:49
Marc A.
BEAUTIFUL WORK!!!, Martin. I love the way it looks and the clean job you did on it. Congrats!!!
BEAUTIFUL WORK!!!, Martin. I love the way it looks and the clean job you did on it. Congrats!!!
18 December 2016, 14:12
Martin Hronsky
it's an old russian kit, it was not fitting well together, I had to use a lot of putty
it's an old russian kit, it was not fitting well together, I had to use a lot of putty
24 December 2016, 01:46
Federico
I have this one in my stash and I'm actually terrified as I sense it'll be the hardest kit in my life 😄 great great job Martin!!
I have this one in my stash and I'm actually terrified as I sense it'll be the hardest kit in my life 😄 great great job Martin!!
25 January 2021, 08:10
Phenix Outis
omistaa tämän kohteen
omistaa tämän kohteen
B8M-1 80mm Rocket Launcher Set (2 launchers) Su-17, Su-24M, Su-25, Su-30/33/35, Su-34, MiG-21, MiG-27, MiG-29SMT, MiG-35
Advanced Modeling 1:48
AMC 48012 16 September, 11:19
Nekharat
valmistunut tämä esine
valmistunut tämä esine
HGUC Gunpla 35th Revive
RX-78-2 Gundam E.F.S.F. Prototype Close-Combat Mobile Suit Bandai 1:144
0196716 (191) 2015 Uusi työkalu Multi-aihe (1!!)16 September, 11:18
Phenix Outis
omistaa tämän kohteen
omistaa tämän kohteen
B13L 122 mm rocket launcher
Amigo Models B13L
АМС 48013 16 September, 11:18
Nekharat
valmistunut tämä esine
valmistunut tämä esine
Full Mechanics The Witch from Mercury
XVX-016 Gundam AerialBandai Spirits 1:100
5065090 (03) 2023 Uusi työkalu 16 September, 11:18
/fi/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=fi
35
35
/fi/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo