Uutisvirta
Alexandros Marinos
merkitsi tämän tuotteen tilauksesta
merkitsi tämän tuotteen tilauksesta
2x Echelles Rafale B/C (et variantes)
2x Ladders for Rafale B/C (and variants)Syhart (Syh@rt) 1:72
A014-72 2024 Uusi työkalu Multi-aihe (2)21 July, 18:11
Alexandros Marinos
merkitsi tämän tuotteen tilauksesta
merkitsi tämän tuotteen tilauksesta
AM39 "Exocet" & pylon for Rafale Decals included
Syhart (Syh@rt) 1:72
AD015-72 2024 Uusi työkalu Multi-aihe (2)21 July, 18:10
Roland Sachsenhofer
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
30 7 July, 08:59
Roland Sachsenhofer
With these pictures I open the book report on Roden's Junkers D.1: I tried to extend the interior with some steel wire, the seat belts are from Eduard. For the detailing I downloaded the very interesting building instructions from Wingnut Wings for the large D.1 in 1:32, which is quite helpful if you want to have a good documentation as a basis for detailing. I'm also going to realise one of the WW variants, which I immediately liked: all in Dural/ NMF with only a minimal set of markings.
With these pictures I open the book report on Roden's Junkers D.1: I tried to extend the interior with some steel wire, the seat belts are from Eduard. For the detailing I downloaded the very interesting building instructions from Wingnut Wings for the large D.1 in 1:32, which is quite helpful if you want to have a good documentation as a basis for detailing. I'm also going to realise one of the WW variants, which I immediately liked: all in Dural/ NMF with only a minimal set of markings.
7 July, 09:03
bughunter
Watching!
I have done the short fuselage already, I hope one day I can do the long one too.
Is the engine painting finished? I can recommend the WNW manual for this, still available on WNW page.
Watching!
I have done the short fuselage already, I hope one day I can do the long one too.
Is the engine painting finished? I can recommend the WNW manual for this, still available on WNW page.
8 July, 20:44
Roland Sachsenhofer
Thanks for the tip - it's definitely a good one! The printed WNW instructions are next to me, so I want to use a little oily black on the top of the engine and add a little "brass"... But not only WNW instructions, also your excellent work is my reference.
Thanks for the tip - it's definitely a good one! The printed WNW instructions are next to me, so I want to use a little oily black on the top of the engine and add a little "brass"... But not only WNW instructions, also your excellent work is my reference.
9 July, 12:35
Roland Sachsenhofer
The fuselage of the D.1 is now closed, the only thing to be careful of was not to damage the corrugated sheet metal joints. A related issue arises with the leading edges of the wings: in my opinion, the prototype shows a continuous line around the leading edge.... this will be difficult to depict: I will try to get close to this with careful sanding and the same amount of reworking with a scalpel.
The fuselage of the D.1 is now closed, the only thing to be careful of was not to damage the corrugated sheet metal joints. A related issue arises with the leading edges of the wings: in my opinion, the prototype shows a continuous line around the leading edge.... this will be difficult to depict: I will try to get close to this with careful sanding and the same amount of reworking with a scalpel.
11 July, 07:09
bughunter
Yes to clean the wing seem is not that esay. I must admit I used also wings from another kit after I was not happy with the first try. I have both the long and short fuselage kits and the wings are the identical. But that shifts the problem only to a later date, when I will build the long one. A new Part PE set is waiting too 🙂
Yes to clean the wing seem is not that esay. I must admit I used also wings from another kit after I was not happy with the first try. I have both the long and short fuselage kits and the wings are the identical. But that shifts the problem only to a later date, when I will build the long one. A new Part PE set is waiting too 🙂
12 July, 16:49
Roland Sachsenhofer
Thank you for your words, mates! - I completely agree that this is not an easy topic! My approach, which you can see started here, is to work on the front edge of the profile with a triangular file. I didn't even try to bring the corrugated sheet metal runs of the top and bottom together - that would be far too small for me - but simply used the file edge many times.... Well, in my opinion it looks at least a little better now than before, so I'll try to make it a little more precise....
Thank you for your words, mates! - I completely agree that this is not an easy topic! My approach, which you can see started here, is to work on the front edge of the profile with a triangular file. I didn't even try to bring the corrugated sheet metal runs of the top and bottom together - that would be far too small for me - but simply used the file edge many times.... Well, in my opinion it looks at least a little better now than before, so I'll try to make it a little more precise....
14 July, 08:57
Roland Sachsenhofer
The Alclad metal colours mercilessly bring out all the flaws and imperfections, especially when everything has already been trimmed to a high gloss in preparation for applying the decals like here! The Wingnut Wings instructions describe an effect called 'tiger stripes' on the wing sheeting, which I recreated using various aluminium and dural colours.
The Alclad metal colours mercilessly bring out all the flaws and imperfections, especially when everything has already been trimmed to a high gloss in preparation for applying the decals like here! The Wingnut Wings instructions describe an effect called 'tiger stripes' on the wing sheeting, which I recreated using various aluminium and dural colours.
18 July, 11:56
bughunter
The stripes are great - can be noticed, but both shades still looks like aluminium which it was.
The stripes are great - can be noticed, but both shades still looks like aluminium which it was.
18 July, 14:53
Roland Sachsenhofer
Thank you very much, mates!
The opinion on the 'tiger stripes' really really pleases me in a very motivating way!
Thank you very much, mates!
The opinion on the 'tiger stripes' really really pleases me in a very motivating way!
18 July, 18:15
Ludvík Kružík
Roland, your model looks very good. I really like the interior of the plane and the engine. Also your rendition of the corrugated sheet metal looks very realistic. 👍
Roland, your model looks very good. I really like the interior of the plane and the engine. Also your rendition of the corrugated sheet metal looks very realistic. 👍
20 July, 14:02
Roland Sachsenhofer
Ludvik, thank you for this comment, giving me a push to get the finishing steps done!
Ludvik, thank you for this comment, giving me a push to get the finishing steps done!
21 July, 06:54
Christopher Reiff
haluaa tämän tuotteen
haluaa tämän tuotteen
interior 3D decal
Avro Lancaster B. Mk.I/III for Border Model Quinta Studio 1:32
QD32150 2022 Uusi työkalu 21 July, 18:06
Phrynohyas
haluaa tämän tuotteen
haluaa tämän tuotteen
Douglas AD-5Q Skyraider Electronics Countermeasures Aircraft
A&A Models 1:72
7232 (AAM7232) 2023 Uudet osat 21 July, 18:05
Carlos H Almeida
haluaa tämän tuotteen
haluaa tämän tuotteen
Movie Collection No.12
P-51D Mustang Decal set Top Gun: Maverick Jeight Design 1:48
JD-48005 (JD48005) 2023 Uusi työkalu 21 July, 18:05
Phrynohyas
merkitsi tämän tuotteen tilauksesta
merkitsi tämän tuotteen tilauksesta
Douglas AD-5Q Skyraider Electronics Countermeasures Aircraft
A&A Models 1:72
7232 (AAM7232) 2023 Uudet osat 21 July, 18:05
/fi/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=fi
35
35
/fi/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo