Uutisvirta

Alex K
Another Gorby-licious small-scale "weird" (we wouldn't want you any other way) creation... Definitely in! 👍

gorby
Welcome to the show Alex and thanks very much. 🙂
The buildy bit is nearly complete so, as usual I'm playing catch-up with the report. Hopefully another update tomorrow. 🙂

David Taylor
Back in.

Robert Podkoński
Another talent-show from gorby! Definitely in!

Jay Dubya
Front row seat, on the bleachers, please Gorby. I wouldn't want to crane my neck to see!

Ben M
🪑

gorby
Thanks for your interest mates. I hope not to disappoint. 🙂

John Hughes
Another build in the series "What's gorby up to now?" Be honest, though. The only reason you didn't have orange flares was that you couldn't get over the fence at the local airfield to steal a couple of windsocks!

Kesa Tiho
I dont understand anything thats going on but i hope your build turns out absolutely stunning

gorby
That made me laugh John. 😄
Kesa: I like to buildodd looking vehicles some of which are converted from standard kits. I looooove scratch building.
Thanks both for tagging along. 🙂

Kesa Tiho
Scale models can be converted? So like a F111 model could be fitted with a nuke even though the original model didnt have one?

gorby
Definitely Kesa, there is a whole range of aftermarket conversions you can buy or if you are feeling adventurous, some conversions are reasonably easy to scratch build yourself. I have a couple of drawers full of plastic sheet of various thickness and plastic and metal rods, tubes, strips etc. I once saw a fantastic large scale scratch build of a B17 build that used the plastic from yogurt pots as the skin.

Kesa Tiho
Woahhhhh

Kesa Tiho
I think i now have something to do over the summer now >:]

gorby
Excellent!
I found a link to the B17 I mentioned. It shows what is possible:
forum.largescaleplan..le-b17g-fuddy-duddy/

Kesa Tiho
Holy flying fudge that looks lovely

David Taylor
Hi Gorby.On the real truck there is a winch as a standard fit in the middle.

Spanjaard
amazing job my friend. not tobe missed, certainly
thanks for the link to that 1:20 B17, it is out of this world.....

gorby
Thanks David, that might have been the reason. 👍
Thanks Spanjaard. That B17 is one of the best scratch-builds I've ever seen - well beyond my ability. I think he sold it to a museum in the US.

Sy Bar
🍿, loving the progress s far 👍

gorby
Thanks Sy, hopefully another update soon. 🙂

Spanjaard
that B17 is certainly where it belongs!

gorby
New photos start at number 18.
I hope to complete the build today and hopefully take some photos in the next couple of days.
Thanks for tagging along. 👍

Spanjaard
lovely work on the tarp!

gorby
Thanks mate. 🙂

David Taylor
Looking at the pic Gorby the driver is reversing the truck back to install the engine.Probably a hand winch with a ratchet.

Jun Chung
very small but attractive vehicle ^^

gorby
Thanks mates. 🙂
You could be right David. In the photo the load isn't attached to the crane hook but a hoop on the jib, as you say, probably using a hand winch. I have three photos of the back of various versions of this vehicle and none of them shows anything which might be used to control the crane, so obviously I can't add what I don't see. Thanks for your comment. 👍

gorby
Charging ahead with my next build I nearly forgot to post the completed pics of this thing. Hope you like how it's turned out. 🙂

Robert Podkoński
Great! Fantastic job, Gorby!

Alex K
Congrats! 👍

CaptGPF
Wow Gorby! Your attention to detail + interesting subject matters are always a joy to watch! I love how you stepped us through the scratch build process and you approach to modeling - very much appreciated!

Spanjaard
superb job gorby!

David Taylor
Another Gorby wonder.

John Hughes
Another little gem. What are you getting the itch to scratchbuild next?

gorby
Wow I'm really taken aback by the response to this one. Lovely comments, thank you all. 🙂
John: My next build is well advanced and hopefully I'll be putting it on here next week. This time it's a full scratchbuild, although not on the scale of my last traction engine. 👍

Martin Oostrom
Another fine addition to Gorby's house of haunted vehicles. Great job!

Nicolas
I got this kit on the to do list as well so I'm following. Nice start.

Robert Podkoński
Following, of course! I loved these "original" Kovozavody kits.

Łukasz Gliński
What a trip down the memory lane for just 3 bucks 😄 👍

Ben M
The fit on this kit…. Not great, not terrible.

Guy Rump
Following. 👍

Ludvík Kružík
This really is a trip into history. I wish you well with your work on the model. And I'll be happy to follow the progress.

The drop tanks used on the Mig you are building are the original (older) version. They were attached directly to the wing (no hinge) and did not have stabilizing ailerons on the end. This type of tanks had one unpleasant feature. When dropping the empty tank, the tank rolled on the wing. This was annoying because it could damage the control surfaces. Therefore, these tanks were replaced by a new type with stabilizing surfaces at the end of the tank and these tanks were suspended on a wing hanger (tanks of this type are in the kit). This solution eliminated the rolling problem.

Ben M
Ludvik, thank you for the details. I did not know that. I imagine they usually did not drop the tanks on trainers.

I also masked the canopy last night. The molding of the frames are a bit vague and lots of curves so it will require some cleanup after painting.

Ludvík Kružík
Ben, you're right that trainer planes didn't usually drop tanks. In peacetime, in normal use, even combat aircraft don't drop tanks (except in emergency situations or exercises).

The purpose of my comment was merely to explain why the tanks on Indonesian aircraft differ from those in the kit.

I look forward to following your progress and wish you a lot of fun building the model and the result to your liking.

Mr D
Doing a nice job 👌
I would by one for 3$ anytime 🤣

Ben M
The fit on this kit is ludicrous. Having a lot of fun with it though.

Ben M
Well the other night I got frustrated with the Vallejo gloss black primer clogging my airbrush, so I added some Mr leveling thinner and gave it the worst orange peel ever as this is totally incompatible with the paint. I thought I could selectively strip the paint with windex but while that kind of stripped the paint it also dissolved a lot of the perfect plastic putty and also dissolved the canopy pva glue and masking. Also I broke off a wing and a horizontal stabilizer. So a bit of a setback.

I have constant problems getting the Vallejo gloss black primer to not clog my 0.4mm nozzle.

Robert Podkoński
Sorry to hear that, Ben...

Duster_d
It's sad, Ben. These Vallejo primers can only be diluted with distilled water because they are based on acrylic urethane (this is my IMHO). Even Vallejo's Thinner and Flow Improver for acrylic paints does not go well with these primers. The same applies to their polyurethane varnishes.

Martin Oostrom
Not saying this will solve your issue, but they have a video with ratios out: Youtube Video

Vassk9
Don't buy it then.

Trez Mackenzie
Don't dictate to me mate.

Vassk9
Then keep your childish comments to yourself.

FernandoCouto
Have a look at tracks provided in Takom's 250/1, Vassk9.
This is not a boring kit, it's not a worthy kit either....

Trez Mackenzie
Once again slop head I am free to express my opinion as a valued member and contributor of this site. Now you go put your nappy back on - and put one on your head as well!

Martin Oostrom
A contribution like 'Boring' has zero value. When someone visits the kit page because he has an interest in this kit and sees this contribution, how is it helping him?
Please give an informed opinion. Why is it boring? Too many/few parts? Lack of colour in the boxart? You already have similar kits from another manufacturer which are better/cheaper?