Uutisvirta
Rudy Poseika
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
6 7 October, 18:09
Rudy Poseika
First time since getting back into making models last year - bought after market decals(on order). I have still to choose paint scheme and which decals.
First time since getting back into making models last year - bought after market decals(on order). I have still to choose paint scheme and which decals.
7 October, 18:11
Nicolas
I realy like the Stearman, following with interest. I hope to start building mine (Pavla) next year.
I realy like the Stearman, following with interest. I hope to start building mine (Pavla) next year.
7 October, 19:02
Rudy Poseika
The parts are all there on sprue but did not match what the instructions indicated about the sprue parts.... 🙂 !
The parts are all there on sprue but did not match what the instructions indicated about the sprue parts.... 🙂 !
7 October, 19:20
Rudy Poseika
I got what I ORDERED, not what I wanted!!! I guess I missed the part number for what I ordered was for a Stearman Kaydet 0- it was just for a 1/32 model !!! The web site HAS what I wanted but am not ordering again....
Back to OOB. 🙁 :}
I got what I ORDERED, not what I wanted!!! I guess I missed the part number for what I ordered was for a Stearman Kaydet 0- it was just for a 1/32 model !!! The web site HAS what I wanted but am not ordering again....
Back to OOB. 🙁 :}
15 October, 22:38
Skyhiker
You should spray white on before applying yellow. Yellow is almost always translucent and needs a decent color underneath. Grey underneath will make it look dirty and give it a green tint and it will be impossible to put enough layers of yellow on to cover the grey.
You should spray white on before applying yellow. Yellow is almost always translucent and needs a decent color underneath. Grey underneath will make it look dirty and give it a green tint and it will be impossible to put enough layers of yellow on to cover the grey.
27 October, 20:00
Rudy Poseika
The yellow look is not what was expected but it does have depth. I may try a few tricks closer to completion.
The yellow look is not what was expected but it does have depth. I may try a few tricks closer to completion.
27 October, 22:40
Andrea Brenco
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
28 October, 22:43
Eric Silbaugh
Can we get a 1/72 version..
Can we get a 1/72 version..
23 October, 17:30
Antony Theocharidis
There is already a 1/72, also from Arma models. There's also a Navalised version of it in 1/72.
There is already a 1/72, also from Arma models. There's also a Navalised version of it in 1/72.
24 October, 10:02
Antony Theocharidis
Unfortunately Arma Models is russian so it might be very difficult to get them right now, especially since they already sold to very few re-sellers even in Europe before the current events. Maybe try ebay sellers?
Unfortunately Arma Models is russian so it might be very difficult to get them right now, especially since they already sold to very few re-sellers even in Europe before the current events. Maybe try ebay sellers?
25 October, 20:32
Sprue Legend
Try contacting i-modelist. I have been able to get kits through them. Got the Ka-52 preo order with all the 3Dprinted Am parts an an arma model Kinzhal off them. Shipping took about a month with Russian post.
Try contacting i-modelist. I have been able to get kits through them. Got the Ka-52 preo order with all the 3Dprinted Am parts an an arma model Kinzhal off them. Shipping took about a month with Russian post.
28 October, 10:14
Sprue Legend
I ve just spoken to i-modelist and they told me that they will do it. I am also tempted by the Mi-28 but I will hold out for the zvezda injection molded version
I ve just spoken to i-modelist and they told me that they will do it. I am also tempted by the Mi-28 but I will hold out for the zvezda injection molded version
28 October, 22:52
Bat X21
haluaa tämän tuotteen
haluaa tämän tuotteen
KHD A3000, Magirus S330, KHD S3000, KHD S3000/SS M Maultier interior 3D decals
Quinta Studio 1:35
QD35028 2022 Uusi työkalu 28 October, 22:46
Howard Clarke
omistaa tämän kohteen
omistaa tämän kohteen
Sexton Self Propelled Artillery 3x Sexton models /w figures
Plastic Soldier 1:72
WW2V20029 2018 Uusi työkalu 28 October, 22:44
Stéphane Jayet
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
39 14 July, 16:30
Stéphane Jayet
Promising kit replacing glue by screw in many cases, but there are some moulding issue, so parts have to be well prepared.
Promising kit replacing glue by screw in many cases, but there are some moulding issue, so parts have to be well prepared.
16 July, 11:27
Stéphane Jayet
@george, during my vacations for 2 weeks I installed some books on it and it is now almost ok
@george, during my vacations for 2 weeks I installed some books on it and it is now almost ok
10 August, 14:59
bossy122
How will you do the black pinstripe? That is what has always kept me from trying this kit.
How will you do the black pinstripe? That is what has always kept me from trying this kit.
12 October, 06:42
Stéphane Jayet
@George, I like this engine as well, and I don't remind a kit where the belts are really belt (not plastic formed with the pulleys).
@George, I like this engine as well, and I don't remind a kit where the belts are really belt (not plastic formed with the pulleys).
12 October, 11:48
Stéphane Jayet
@bossy122, frankly speaking, I don't know yet. 2 options on the table : option 1 is to cut the decals from the box, option 2 is to do some masking (using tracing paper on the original decals). Option 2 is my preferred option so far.
I already painted the body twice because I had some issues with the masking tape (removing the paint), so hope it will work at first try....
@bossy122, frankly speaking, I don't know yet. 2 options on the table : option 1 is to cut the decals from the box, option 2 is to do some masking (using tracing paper on the original decals). Option 2 is my preferred option so far.
I already painted the body twice because I had some issues with the masking tape (removing the paint), so hope it will work at first try....
12 October, 11:53
bossy122
Can you copy the kits pinstripe then print your own? A little white on one side and a little yellow on the other, covering up any tapes leaks as well.
Can you copy the kits pinstripe then print your own? A little white on one side and a little yellow on the other, covering up any tapes leaks as well.
13 October, 03:03
Stéphane Jayet
Hello, I made a kind of combination. Since I was afraid not to get the same yellow colour, I printed the pinstripe on white decal paper, when cutting it I let a small part of the white to have it clean. The difficult part was to have no white on the other side. I had to cut and redo couple of times.
Unfortunately, I realised later that I should have done differently as it was very difficult /impossible to have the large black part parallel to the pinstripe....
Hello, I made a kind of combination. Since I was afraid not to get the same yellow colour, I printed the pinstripe on white decal paper, when cutting it I let a small part of the white to have it clean. The difficult part was to have no white on the other side. I had to cut and redo couple of times.
Unfortunately, I realised later that I should have done differently as it was very difficult /impossible to have the large black part parallel to the pinstripe....
22 October, 09:03
bossy122
Shunko made decals for the Tamiya kit, but of course, they're no where to be found.
Shunko made decals for the Tamiya kit, but of course, they're no where to be found.
22 October, 18:34
Daniel Olson
haluaa tämän tuotteen
haluaa tämän tuotteen
1969 Camaro Z28 Detail Set for RMX (Photo Etched)
The Model Car Garage 1:12
MCG-2180 28 October, 22:38
scrennell
haluaa tämän tuotteen
haluaa tämän tuotteen
2005 Mitsubishi Lancer Evolution VIII The Fast And The Furious
AMT/ERTL 1:24
38512 2006 Uusi työkalu Multi-aihe (1!!)28 October, 22:37
/fi/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=fi
35
35
/fi/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo