Uutisvirta
Bart Goesaert
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
15 kuvien
Normandy landing Uusi: 13 August, 19:51 1:72
And now with 40% buff and 40% olive drab and 20% clear...
16 14 June, 15:28
Bart Goesaert
Ready for paint. A lot of flash on the smaller parts like headlight covers, all were scraped as thin as I dared to do.
Ready for paint. A lot of flash on the smaller parts like headlight covers, all were scraped as thin as I dared to do.
14 June, 18:45
Bart Goesaert
Thank you guys, will be out of the box, with exception for decals... none are supplied for the Sherman
Thank you guys, will be out of the box, with exception for decals... none are supplied for the Sherman
22 June, 16:58
Bruce Huxtable
Very impressive PE work, for sure. This looks like it's going to be a little gem 🙂
Very impressive PE work, for sure. This looks like it's going to be a little gem 🙂
22 June, 17:25
Bart Goesaert
Thank you. Paint added. The different kinds of green on a sherman with regards to it's timeframe are endless, with this in regards, is it to dark for a sherman in the beginning of the normandy campaign?
Thank you. Paint added. The different kinds of green on a sherman with regards to it's timeframe are endless, with this in regards, is it to dark for a sherman in the beginning of the normandy campaign?
24 July, 08:29
Bart Goesaert
Thx Alec, took some time, but resprayed the tank completely. Changed the mix to 40% buff and 40% olive drab and 20% clear...
Thx Alec, took some time, but resprayed the tank completely. Changed the mix to 40% buff and 40% olive drab and 20% clear...
13 August, 19:58
Łukasz Gliński
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
24 25 June, 19:54
Alec K
Nice hangar full of Czech planes, I love it 👍. Makes me wanna build something from that stable again...
Nice hangar full of Czech planes, I love it 👍. Makes me wanna build something from that stable again...
13 August, 02:10
Łukasz Gliński
Many thanks mates and kudos to Alec, who supplied me with a copy of these lovely backdrops 👍
Alec, give it a try! 🙂
Many thanks mates and kudos to Alec, who supplied me with a copy of these lovely backdrops 👍
Alec, give it a try! 🙂
13 August, 19:31
BAT21
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
93 18 April, 17:24
Robert Podkoński
I have uploaded a few photos of Polish Mi-6 before and after restoration here:
Once there was a collection | Album by podkon ; and here:
Polish Air Force Museum - Dęblin | Album by podkon. Perhaps you will find them useful.
I have uploaded a few photos of Polish Mi-6 before and after restoration here:
Once there was a collection | Album by podkon ; and here:
Polish Air Force Museum - Dęblin | Album by podkon. Perhaps you will find them useful.
23 April, 19:04
Alexander Grivonev
Habe den Kit seit Jahren im Besitz, traue mich aber nicht ran. Was für ein Monster👍
Habe den Kit seit Jahren im Besitz, traue mich aber nicht ran. Was für ein Monster👍
24 May, 17:06
BAT21
Wer bei der Tu 128 von Trumpeter alle Fehler in Perfektion beseitigt hat, muss sich nicht vor der Mi-6 fürchten.
Etwas Spachtelmasse und Schleifpapier bereitlegen... und schon kann es losgehen 😉
Wer bei der Tu 128 von Trumpeter alle Fehler in Perfektion beseitigt hat, muss sich nicht vor der Mi-6 fürchten.
Etwas Spachtelmasse und Schleifpapier bereitlegen... und schon kann es losgehen 😉
24 May, 18:54
Alexander Grivonev
Ja das war wirklich eine Baustelle das Ding. Aber trotz des Ehrgeizes der Chinesen, dem Modellbauer auch den letzten Nerv zu rauben, sieht mir Amodel so auf den ersten Blick nach mehr Arbeit aus...
Ja das war wirklich eine Baustelle das Ding. Aber trotz des Ehrgeizes der Chinesen, dem Modellbauer auch den letzten Nerv zu rauben, sieht mir Amodel so auf den ersten Blick nach mehr Arbeit aus...
24 May, 21:21
Michael Kohl
Starts to look like a Mil Mi-6? Well, then it's time to charge the teaser to a picture of your model. 😉
Starts to look like a Mil Mi-6? Well, then it's time to charge the teaser to a picture of your model. 😉
2 June, 19:37
Juergen Klinglhuber
Joining in late, but sure worth it. Clean built on this "filling the gaps" giant. 👍
Joining in late, but sure worth it. Clean built on this "filling the gaps" giant. 👍
15 June, 14:45
Treehugger
Q: The tiny "brass" colored tubes for the wiring on the main rotor head, are those bits of cut up syringe tips?
Q: The tiny "brass" colored tubes for the wiring on the main rotor head, are those bits of cut up syringe tips?
15 June, 16:42
CaptGPF
That rotor work is sick!
…but so is the PE cockpit work at this scale! Watching!
That rotor work is sick!
…but so is the PE cockpit work at this scale! Watching!
22 June, 17:03
BAT21
Thank you mates.
The self-cut masks on the side windows revealed a catastrophic picture after removal: something sticky remained on the windows... the hoped-for cover was also rather poor, the paint got under the masks at the edges. 🤬
Now I'll make a calming coffee and then try to repair it.
Thank you mates.
The self-cut masks on the side windows revealed a catastrophic picture after removal: something sticky remained on the windows... the hoped-for cover was also rather poor, the paint got under the masks at the edges. 🤬
Now I'll make a calming coffee and then try to repair it.
8 August, 08:42
Alec K
Damn, that sucks. I had same experience on several builds, nothing some scraping and reapplication of Future can't fix.
Damn, that sucks. I had same experience on several builds, nothing some scraping and reapplication of Future can't fix.
8 August, 13:08
Thomas Kolb
That's unfortunate, but maybe you can remove the tape residue with some IPA alcohol and cotton buds?
That's unfortunate, but maybe you can remove the tape residue with some IPA alcohol and cotton buds?
8 August, 13:25
BAT21
I scraped everything off with a toothpick, more or less. Not the best result, but the model was able to avoid being thrown away.
I scraped everything off with a toothpick, more or less. Not the best result, but the model was able to avoid being thrown away.
8 August, 14:37
Spanjaard
seems you recovered pretty well from the problem, congratulations great result
seems you recovered pretty well from the problem, congratulations great result
8 August, 16:41
BAT21
With the attachment of the last parts and the assembly of the antenna forest, the helicopter is finished and the project is complete.
Thanks to everyone who has been part of this strenuous journey... and now have fun with the final pictures.
With the attachment of the last parts and the assembly of the antenna forest, the helicopter is finished and the project is complete.
Thanks to everyone who has been part of this strenuous journey... and now have fun with the final pictures.
10 August, 14:46
Ctirad B
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
20 kuvien
Felixstowe F.2A Early VersionUusi: 14 August, 17:38 1:72
projekti: Felixstowe F.2A Early Version
14 August, 17:36
His Dudeness
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
20 kuvien
SU-152 September 43 Mius battlesUusi: 14 August, 17:10 1:35
projekti: SU-152 Destroyed on the ditch
3 14 August, 16:51
Tim Sloan » Ominaisuuspyynnöt
With the growing additions of 3D print files being added, it would be nice to be able to find them there's no way to search for a "type" so,unless I'm already aware of an available file,there's no way to find others that might be available.
With the growing additions of 3D print files being added, it would be nice to be able to find them there's no way to search for a "type" so,unless I'm already aware of an available file,there's no way to find others that might be available.
Toteutettu
1 13 August, 17:13
scalemates
This is now implemented, when you have selected 'Kits' in search/stash/wishlist there is a new filter "Delivery type"
This is now implemented, when you have selected 'Kits' in search/stash/wishlist there is a new filter "Delivery type"
14 August, 11:57
Tim Sloan
I dont see it anywhere...I clicked on "Kits" on the tool bar above (im on PC) ..scrolled down, and I dont see anything that says "Delivery type" ...I also searched for a specific name ..and in the side bar..I still see nothing that says that. I appreciate you adding it though..I just dont see it
I dont see it anywhere...I clicked on "Kits" on the tool bar above (im on PC) ..scrolled down, and I dont see anything that says "Delivery type" ...I also searched for a specific name ..and in the side bar..I still see nothing that says that. I appreciate you adding it though..I just dont see it
14 August, 15:18
Gustavo Barrichello
haluaa tämän tuotteen
haluaa tämän tuotteen
U.S. Navy Carrier Fighter
F-14A Tomcat "Atsugi CVW-5" w/Metal Pitot Tube & AOA Sensor Platz 1:48
TPA-49 (10) 2024 Uudet osat 14 August, 17:26
J35J
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
17 kuvien
Supermarine 224 - The First SpitfireUusi: 14 August, 13:28 1:72
Had some spare PE in order to enhance the airframe details
projekti: Supermarine 224 - The First Spitfire
19 21 July, 09:11
J35J
Thanks Gorby! This is my second vacu kit build and this time it feels a little bit more straight forward…
My experience so far with vacu kits is that you have to spend a good amount of time on fitting, sanding and putty work to get a nice base for paint and finishing. Also spending quite some time reviewing old photos to get a good picture of the details. This as there is a fair amount of scratch work to get a decent build.
Thanks Gorby! This is my second vacu kit build and this time it feels a little bit more straight forward…
My experience so far with vacu kits is that you have to spend a good amount of time on fitting, sanding and putty work to get a nice base for paint and finishing. Also spending quite some time reviewing old photos to get a good picture of the details. This as there is a fair amount of scratch work to get a decent build.
25 July, 11:25
Robert Podkoński
You're a brave man, indeed! I will follow this thread with pleasure, for sure.
You're a brave man, indeed! I will follow this thread with pleasure, for sure.
25 July, 12:55
Mr D
Nice, Nice 👍👍, lalways wanted to see a vacform build, Do you have to make up other parts to add on ??
Thanks for upload 😃👍
Nice, Nice 👍👍, lalways wanted to see a vacform build, Do you have to make up other parts to add on ??
Thanks for upload 😃👍
27 July, 19:59
J35J
Thanks Mr D for your comments.
There will certainly be scratch build involved, mainly regarding the details as it looks for now. Otherwise I will raid my spare part stash first in order to save time and frustration.
If you are intrested in vac kits you can also have a look at my first vac kit:
McDonnell XP-67 Moonbat | Album by J35J (1:72)
Thanks Mr D for your comments.
There will certainly be scratch build involved, mainly regarding the details as it looks for now. Otherwise I will raid my spare part stash first in order to save time and frustration.
If you are intrested in vac kits you can also have a look at my first vac kit:
McDonnell XP-67 Moonbat | Album by J35J (1:72)
27 July, 21:39
Mr D
Thanks 👍👍 great, will do , l have an intest...as l enjoy making parts, lve had to do it few times, when parts lost or broken or details missed of kit...even canopy once 🤣.
Will check out the XP-67
Thanks 👍👍 great, will do , l have an intest...as l enjoy making parts, lve had to do it few times, when parts lost or broken or details missed of kit...even canopy once 🤣.
Will check out the XP-67
28 July, 17:00
J35J
@Mr D - yes you will need some good scissors as a start😅, for the fine tuning of the parts I normally use saw razor blades and sanding paper of variuos grits. Regarding glue I use "normal" Tamyia Extra Thin, the vacu kit plastic is often quite soft and melts easily.
@Mr D - yes you will need some good scissors as a start😅, for the fine tuning of the parts I normally use saw razor blades and sanding paper of variuos grits. Regarding glue I use "normal" Tamyia Extra Thin, the vacu kit plastic is often quite soft and melts easily.
30 July, 19:02
J35J
@Skyhiker - Happy to hear that your following with great intrest. Usually the building pace goes down during the sommer period as I have been reminded that we have a garden that also need some TLC…😂
Nevertheless, yes there is planning and ordning of parts going on behind the scenes. Cockpit need to be done, rescribing the full kit, alignment of wheels as the mold was totally off-set. Drill out all machine guns for after market parts etc.
The main work will be to prepare the plane for NMF look also including some aluminum dope areas. Will try AK's metal paints this time. Stay tuned!
@Skyhiker - Happy to hear that your following with great intrest. Usually the building pace goes down during the sommer period as I have been reminded that we have a garden that also need some TLC…😂
Nevertheless, yes there is planning and ordning of parts going on behind the scenes. Cockpit need to be done, rescribing the full kit, alignment of wheels as the mold was totally off-set. Drill out all machine guns for after market parts etc.
The main work will be to prepare the plane for NMF look also including some aluminum dope areas. Will try AK's metal paints this time. Stay tuned!
30 July, 19:11
Łukasz Gliński
Luckily the old Russian saying applies to Sweden too - "we have only 10 months of winter, but all the rest is summer!" 😄
Luckily the old Russian saying applies to Sweden too - "we have only 10 months of winter, but all the rest is summer!" 😄
31 July, 07:41
Soeren R.
haluaa tämän tuotteen
haluaa tämän tuotteen
Mitsubishi Ki-46 III Type 100 & 4X4 Light Vehicle Kurogane Set
Tamiya 1:48
25217 2024 Mallijoukko Multi-aihe (2)14 August, 17:24
evgo1
merkitsi tämän tuotteen tilauksesta
merkitsi tämän tuotteen tilauksesta
1/700 Big Blue Boy JMSDF SSM-1B Launcher
BigBlueBoy 1:700
75001 14 August, 17:22
/fi/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=fi
35
35
/fi/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo