Uutisvirta
Gustavo Barrichello
haluaa tämän tuotteen
haluaa tämän tuotteen
U.S. Navy Carrier Fighter
F-14A Tomcat "Atsugi CVW-5" w/Metal Pitot Tube & AOA Sensor Platz 1:48
TPA-49 (10) 2024 Uudet osat 14 August, 17:26
J35J
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
17 kuvien
Supermarine 224 - The First SpitfireUusi: 14 August, 13:28 1:72
Had some spare PE in order to enhance the airframe details
projekti: Supermarine 224 - The First Spitfire
19 21 July, 09:11
J35J
Thanks Gorby! This is my second vacu kit build and this time it feels a little bit more straight forward…
My experience so far with vacu kits is that you have to spend a good amount of time on fitting, sanding and putty work to get a nice base for paint and finishing. Also spending quite some time reviewing old photos to get a good picture of the details. This as there is a fair amount of scratch work to get a decent build.
Thanks Gorby! This is my second vacu kit build and this time it feels a little bit more straight forward…
My experience so far with vacu kits is that you have to spend a good amount of time on fitting, sanding and putty work to get a nice base for paint and finishing. Also spending quite some time reviewing old photos to get a good picture of the details. This as there is a fair amount of scratch work to get a decent build.
25 July, 11:25
Robert Podkoński
You're a brave man, indeed! I will follow this thread with pleasure, for sure.
You're a brave man, indeed! I will follow this thread with pleasure, for sure.
25 July, 12:55
Mr D
Nice, Nice 👍👍, lalways wanted to see a vacform build, Do you have to make up other parts to add on ??
Thanks for upload 😃👍
Nice, Nice 👍👍, lalways wanted to see a vacform build, Do you have to make up other parts to add on ??
Thanks for upload 😃👍
27 July, 19:59
J35J
Thanks Mr D for your comments.
There will certainly be scratch build involved, mainly regarding the details as it looks for now. Otherwise I will raid my spare part stash first in order to save time and frustration.
If you are intrested in vac kits you can also have a look at my first vac kit:
McDonnell XP-67 Moonbat | Album by J35J (1:72)
Thanks Mr D for your comments.
There will certainly be scratch build involved, mainly regarding the details as it looks for now. Otherwise I will raid my spare part stash first in order to save time and frustration.
If you are intrested in vac kits you can also have a look at my first vac kit:
McDonnell XP-67 Moonbat | Album by J35J (1:72)
27 July, 21:39
Mr D
Thanks 👍👍 great, will do , l have an intest...as l enjoy making parts, lve had to do it few times, when parts lost or broken or details missed of kit...even canopy once 🤣.
Will check out the XP-67
Thanks 👍👍 great, will do , l have an intest...as l enjoy making parts, lve had to do it few times, when parts lost or broken or details missed of kit...even canopy once 🤣.
Will check out the XP-67
28 July, 17:00
J35J
@Mr D - yes you will need some good scissors as a start😅, for the fine tuning of the parts I normally use saw razor blades and sanding paper of variuos grits. Regarding glue I use "normal" Tamyia Extra Thin, the vacu kit plastic is often quite soft and melts easily.
@Mr D - yes you will need some good scissors as a start😅, for the fine tuning of the parts I normally use saw razor blades and sanding paper of variuos grits. Regarding glue I use "normal" Tamyia Extra Thin, the vacu kit plastic is often quite soft and melts easily.
30 July, 19:02
J35J
@Skyhiker - Happy to hear that your following with great intrest. Usually the building pace goes down during the sommer period as I have been reminded that we have a garden that also need some TLC…😂
Nevertheless, yes there is planning and ordning of parts going on behind the scenes. Cockpit need to be done, rescribing the full kit, alignment of wheels as the mold was totally off-set. Drill out all machine guns for after market parts etc.
The main work will be to prepare the plane for NMF look also including some aluminum dope areas. Will try AK's metal paints this time. Stay tuned!
@Skyhiker - Happy to hear that your following with great intrest. Usually the building pace goes down during the sommer period as I have been reminded that we have a garden that also need some TLC…😂
Nevertheless, yes there is planning and ordning of parts going on behind the scenes. Cockpit need to be done, rescribing the full kit, alignment of wheels as the mold was totally off-set. Drill out all machine guns for after market parts etc.
The main work will be to prepare the plane for NMF look also including some aluminum dope areas. Will try AK's metal paints this time. Stay tuned!
30 July, 19:11
Łukasz Gliński
Luckily the old Russian saying applies to Sweden too - "we have only 10 months of winter, but all the rest is summer!" 😄
Luckily the old Russian saying applies to Sweden too - "we have only 10 months of winter, but all the rest is summer!" 😄
31 July, 07:41
Soeren R.
haluaa tämän tuotteen
haluaa tämän tuotteen
Mitsubishi Ki-46 III Type 100 & 4X4 Light Vehicle Kurogane Set
Tamiya 1:48
25217 2024 Mallijoukko Multi-aihe (2)14 August, 17:24
evgo1
merkitsi tämän tuotteen tilauksesta
merkitsi tämän tuotteen tilauksesta
1/700 Big Blue Boy JMSDF SSM-1B Launcher
BigBlueBoy 1:700
75001 14 August, 17:22
Andreas Roth
omistaa tämän kohteen
omistaa tämän kohteen
Cold War Warrior - M60/M60A1/A2/A3 Die Kampfpanzer der M60-Serie auf Manöver im Kalten Krieg 19...
American Special No. 3030
Walter Böhm
2017 14 August, 17:22
Andrew P
lisäsi uuden valokuva-albumin.
lisäsi uuden valokuva-albumin.
20 kuvien
Martin M-130 China ClipperUusi: 14 August, 16:28 1:144
230522: Was able to re-use the boat cradle I adapted for my previous B-314 Project.
projekti: Martin M-130 China Clipper
2 14 August, 15:28
/fi/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=fi
35
35
/fi/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo