Uutisvirta

Miguel Vaquero
Next proyect, this beautiful pre war plane. I've always liked this plane, so when I saw this kit fairly cheap I couldn't resist to buy it. I will make camouflage pattern, even though the book comes with two livery possibilities. This time around, the build Is going to be completely out of the box.

Rui S
Nice 👍

Guy Rump
Another post war aircraft, remember these when we lived at Leuchars low flying over the married quarters. 🙂

Nicolas
Following

Ekki
I'm in too.

Guy Rump
Made a start on the Phantom. Cockpit and pilots plus internal decals added. 🙂

Welcome as always Nicolas & Ekki. 👍

Many thanks mates for your interest and likes Andre K, NordMito, Lukasz G, zhsv, J35J, Villiers DV, Bernd G & 1 other mate. 👍

Rolf Rolf
Nice, what's the kit like? I've been looking at getting it

Sergej I
Watching, good start! 👍

Guy Rump
Weights added to the nose. Internal part where cockpit will go sprayed Vallejo Model Air intermediate blue. Engine intake internals painted Vallejo Model Air Insignia white. 🙂

Many thanks mates for your interest and likes Mr D, Sukhoi242 & Austin LAI. 👍

@Rolf Rolf, Thanks for the kind comment. The kit is quite complex with a lot of parts and, as with some of the newer Airfix kits you have to be accurate as the fit is very tight. Other than that, so far, so good! 👍

Guy Rump
Intakes added to fuselage and cockpit added. 🙂

Welcome Segej! 👍

Many thanks mates for your interest and likes Tibor S & Matti T. 👍

DerMattes
Following 👍

Dave Flitton
Watching!

Mike Montgomery
I wonder if they got the engines right for the RAF Phantom. That's one area where kit manufacturers constantly get wrong.

Guy Rump
Fuselage now together. 🙂

Welcome DerMattes, Dave & Mike. 👍 @Mike, not certain about the engines, not an expert at all. 👍

Many thanks mates for your interest and likes Sergej I, Mona, Dave F, Maciej B & Arif S. 👍

Mirko Römer
Nice progress 👍

Cristian A
Following

Ekki
And me.

Mirko Römer
Inn

Moreno Baruffini
During the summer I wasn't idle, but I started some projects 😜.
This is the biggest, that I'll try to keep active in the following months.

DerMattes
Following 👍

Maciej Bellos
Watching with interest!

Mirko Römer
Taking a Seat, nice topic!

Ekki
Watching

Nicolas
Me two.

Mirko Römer
Me three.

Casey Rupley
First time posting a work in progress album. Decided to get crazy with the interior and scratch built everything in the 2nd and 3rd rows because the kit is completely wrong for the military version of this bird. Interior is now done. Next up are the rotors, then I'll begin assembling the puzzle of the exterior - it's a ton of small pieces instead of fuselage halves.

Andrew Horton
Wow! Great start, Casey! I look forward to seeing this project completed.

Daniel
Now this is stunning detail, really impressive💪🏻

Casey Rupley
Thanks, Daniel and FLM! Will hopefully have rotors done this weekend and fuselage well on its way. Daniel - your interior is making mine look like childs play, but I like the motivation it provides to step up my game.

Guillaume Boulanger
Folowing, i like your work and comment on the photo help great.

Casey Rupley
Thank you, Guillaume!

More progress has been made. Main rotors done and the fuselage is starting to come together, bit by bit. Many thanks to the notes and pictures posted by Bernhard Schrock when he built this kit.

Porfiry Pocięgło
Love it when people get crazy with details!

Zsolt Czegle
Great work so far! Following!

Casey Rupley
Thank you, Porfiry and Zsolt!

Casey Rupley
Sorry for the 6 month delay. I haven't worked on this one for a while (was taking a break from everything, then finished my USS Reuben James ship), but I discovered I had pictures and progress I hadn't yet posted. So here you go! I'll be picking this up again next week. I'm almost at the point where it's ready for paint.

The fit has been pretty horrible - all the panels around the engine were horrible, and the clear pieces that make up the forward cockpit/doors left a sizeable gap. I put comments on each of the pictures to explain myself.

Daniel
Awesome work with all these little extras, will look great in paint I think👍🏻

Casey Rupley
Finally primed, pre-shaded, and painted. Next up will be clear coat and decals.

Scott
Looking very sharp Casey!

Casey Rupley
More progress. The helo is sitting on her own legs now, paint has been touched up, decals applied, and a lot of parts and details added. Only a few things left to do at this point, so I hope to have it done shortly. It's been fun (I think), but I'm ready to move on.

Casey Rupley
Finally done!

Florian H.
Great work and result

Daniel
Fantastic clean detail work and the painting is spot on as well - really nailed these softer camo edges, congrats casey 👍

Casey Rupley
Thank you, Florian and Daniel! Yeah, soft edges are a pain and I'm always relieved when they're done.

Laurent VILLANUEVA- "HELLER ForEver"
great

Scott
Looking awesome!!!

Cristian A
Very cool helicopter!!

Felix Troschier
Great job!

Roland Sachsenhofer
These four pictures begin a project that should result in one of the largest models I have ever attempted. Not the biggest - the 1:32 Liberator holds my record here - but close!
However, the impressively large box contains surprisingly little and, also surprisingly, large components such as the fuselage, wings and tailplane are already assembled. Incidentally, these are made of fibreglass and require their own treatment.
These parts are also stable and clean. A bit of filling was required, as the traces of glue and filler on the seams are very rough and show air pockets. This will now be sanded, the cockpit sawn out and the windows drilled - well, modelling a little differently than usual! 🙂

Gergő Takács
This looks like a cool project! Following.

Treehugger
The panel lines look ok I guess. I mean, I would be happy with those panel lines.

Mr D
Like it , nice project.
I'm working on the Beriev Be-6 Armoured Flying boat,
Revisiting a kit after 33yrs.
All the best with yours...😃👍👍

Robert Podkoński
A true behemoth it is. I will surely follow this build with utmost interest!

gorby
Looking forward to seeing this take shape. 🙂
I believe the last Mars had it's final flight two weeks ago.
Youtube Video
Youtube Video

Nathan Dempsey
Oh my another giant. Following 👀

Robert Podkoński
BTW. Do we see the finished Fairchild in the background, Roland?

Roland Sachsenhofer
I am very happy about all your interest! In fact, I also started this project because of its topicality; the pictures of the last flight of Hawai Mars are always a heart-warming pleasure; this one in particular, thanks Gorby for posting it!

Today I drilled the openings for the windows in the fuselage; I determined the diameter of the holes from kit glass parts. They seem a bit big to me, but we'll see. As I'm not going to use the clear parts from the kit, but want to make them with Klearfix, I could reduce the diameter quite a bit.
The next steps will be to finish sanding the fuselage seams - now only the top side has to be done - and then to glue the wings and stabilisers to the fuselage. To do this, I'm cutting solid steel rods to length, which I'll glue in place with a two-component adhesive.
The Mars should be ready by mid-October: I want to take it to the Euromodel in Ried, Upper Austria.

And yes, In fact, the more or less finished Fairchild F.91 had to serve as a scale model in the background! 🙂

Thomas Mayer
Du bist echt eine Bau-Maschine, Roland! Und immer kommt etwas sehr schönes raus! 👍

Roland Sachsenhofer
Danke für die Einschätzung, Thomas! 🙂

Roland Sachsenhofer
The construction of Mars is progressing: I'll show you a few construction steps in a little 'time lapse'. Attaching the wings and tailplane with 2k glue worked well; the materials could be sanded smooth and fine afterwards. However, the brittleness of the fibreglass caused some difficulties; parts kept splintering off and had to be filled, sanded and re-engraved. As I always do the whole thing standing up, wearing a mask and under running water, this always turns into an almost athletic exercise 🙂 But now it seems to be over and the Mars is ready for its first encounter with colour... I took the two crew members under the cockpit canopy to make the proportions clear and to keep my options open for presenting the finished aircraft - who knows, maybe it will take off or fly?

gorby
It's a bit of a monster! 😮
Doesn't look like an easy build but you seem to be beating it into shape. 🙂

Robert Podkoński
You're the brave man, Roland, not me...

DerMattes
Das schau ich mir weiter an 🙂

Mr D
Looking good Roland 👌
Be a nice bird when she done, pilots look smart 👍👍

Cuajete
Wow... an unusual and gigant model... It seems like fiberglass is difficult to handle.
Great job so far, Roland!

Michael Kohl
Na, da hab ich doch auch nen Blick drauf

Roland Sachsenhofer
Thank you very much for your motivating feedback and your interest, mates!

Łukasz Gliński
I have to follow that behemoth 👍 I don't think I'll ever find enough space to build one myself 😄

Thomas Kolb
My goodness, your models are just getting bigger and bigger! I cannot wait to see it finished!

Finn
Looking interesting, I'm in

Ray Loch
Following as well. Just saw its retirement flyby and landing in Pat Bay, Its Huge.

Roland Sachsenhofer
Fortunately, the Martin Mars has reached the stage where the colouring and surface design will be the main thing; so far I've been 'plugging holes' again and again: the fibreglass surface proves to be quite brittle, damage is difficult to putty, and when re-engraving the lost panel lines it quickly happens that it cracks again under the carefully guided scalpel blade - and a new hole has already appeared. The new pictures show a few such construction sites, for example at the bow under the cockpit glazing or on the back of the fuselage between the wings.
But, all in all, in retrospect it's all half as bad, now I'm looking forward to the paintwork!

Thank you, mates, for your interest and feedback! Ray, I would have liked to have experienced that too!

Ben M
👀🤯

Cuajete
Roland, I was unaware of these problems with fiberglass and it is a shame that these kits are so expensive considering the quality of these materials. I think the worst is over. You can feel proud of the work done so far. The effort was worth it. Go on!

Roland Sachsenhofer
Those are encouraging responses, yes, Cuajete, I think so too. Thank you both for your interest and comments!

Mr D
How big is the model??
Is it cast in fiberglass because it's to big for injection molding??
Nice to see the update 😁👍👍
The vent in behind the cockpit done now.

Mirko Römer
That's what you call a project!👍