Uutisvirta
![](/profiles/img/69678-355-s.jpg)
omistaa tämän kohteen
![1:35 Fahrschulfahrzeug Version 2 Holzgasausrüstung für Sd.Kfz.251 Ausf. C/D Conversion Kit (Custom-Scale 35112) 35112](/products/img/0/2/9/1392029-38473-43-t180.jpg)
Fahrschulfahrzeug Version 2 Holzgasausrüstung für Sd.Kfz.251 Ausf. C/D Conversion Kit
Custom-Scale 1:35
35112 2021 Uusi työkalu 24 August, 22:25
![](/profiles/img/69678-355-s.jpg)
omistaa tämän kohteen
![1:35 Sd.Kfz. 251, Sd.Kfz. 11 Workable Track Link (AFV Club AF35070) AF35070](/products/img/5/2/8/216528-12290-13-t180.jpg)
German Halftrack
Sd.Kfz. 251, Sd.Kfz. 11 Workable Track Link latest model (Steel) AFV Club 1:35
AF35070 2004 Uusi työkalu Multi-aihe (2)24 August, 22:24
![](/profiles/img/69678-355-s.jpg)
omistaa tämän kohteen
![1:35 Sd.Kfz.251 Late Model track (AFV Club AF35069) AF35069](/products/img/3/2/5/136325-10244-t180.jpg)
Sd.Kfz.251 Late Model track Germany Halftrack Sd.Kfz.251, Sd.Kfz.11 late model workable track link
AFV Club 1:35
AF35069 2004 Uusi työkalu 24 August, 22:24
![](/profiles/img/62456-744-s.jpg)
haluaa tämän tuotteen
![1:48 CATM-120C Captive air training missiles (3D Printed) (ResKit RS48-0414) RS48-0414](/products/img/3/8/2/1572382-62456-72-t180.jpg)
CATM-120C Captive air training missiles (3D Printed) (F-15, F-16, F-18,F-22, JAS-39, Eurofighter)
ResKit 1:48RS48-0414 2024 Uusi työkalu
![UA UA](/s/images/flags7/32/UA.png)
24 August, 22:24
![](/profiles/img/62456-744-s.jpg)
haluaa tämän tuotteen
![1:48 CATM-120C Captive air training missiles (3D Printed) (ResKit RS48-0414) RS48-0414](/products/img/3/8/2/1572382-62456-72-t180.jpg)
CATM-120C Captive air training missiles (3D Printed) (F-15, F-16, F-18,F-22, JAS-39, Eurofighter)
ResKit 1:48RS48-0414 2024 Uusi työkalu
![UA UA](/s/images/flags7/32/UA.png)
24 August, 22:24
![](/profiles/img/62456-744-s.jpg)
haluaa tämän tuotteen
![1:48 CATM-120C Captive air training missiles (3D Printed) (ResKit RS48-0414) RS48-0414](/products/img/3/8/2/1572382-62456-72-t180.jpg)
CATM-120C Captive air training missiles (3D Printed) (F-15, F-16, F-18,F-22, JAS-39, Eurofighter)
ResKit 1:48RS48-0414 2024 Uusi työkalu
![UA UA](/s/images/flags7/32/UA.png)
24 August, 22:24
![](/profiles/img/145265-733-s.jpg)
omistaa tämän kohteen
![1:35 SS Unterscharführer Tank crew, 1944 (Platoon PT-034) PT-034](/products/img/4/5/6/1198456-23667-11-t180.jpg)
SS Unterscharführer Tank crew, 1944
Platoon 1:35
PT-034 24 August, 22:24
![](/profiles/img/62456-744-s.jpg)
haluaa tämän tuotteen
![1:48 CATM-120C Captive air training missiles (3D Printed) (ResKit RS48-0414) RS48-0414](/products/img/3/8/2/1572382-62456-72-t180.jpg)
CATM-120C Captive air training missiles (3D Printed) (F-15, F-16, F-18,F-22, JAS-39, Eurofighter)
ResKit 1:48RS48-0414 2024 Uusi työkalu
![UA UA](/s/images/flags7/32/UA.png)
24 August, 22:24
![](/profiles/img/145265-733-s.jpg)
omistaa tämän kohteen
![1:16 SS Sturmmann - Ambush at Poteau 1944 (S&T Products STP-16020) STP-16020](/products/img/5/9/2/1335592-31461-17-t180.jpg)
SS Sturmmann - Ambush at Poteau 1944
S&T Products 1:16
STP-16020 24 August, 22:18
![](/profiles/img/15656-162-s.jpg)
lisäsi uuden valokuva-albumin.
52 19 June 2023, 19:38
![](/profiles/img/15656-162-s.jpg)
This weekend both Essex and Hancock kits were started. You can compare these two on my garden table, Essex being a short hull version and Hancock one of the later long hull types. Therefore Hancock has the Ticonderoga Pontos set. I threw in a dozen of airplane sets and pillaged the Ion Model figures stock for about 420 seamen to take the stations. While making the requested change to the rear elevator (see shipmodels.info/mws_..pontos+essex#p919517 ) an error was discovered in PE part 605 and this can only be solved by completely scratching it. Also, I'll open up one rear elevator so I have to adapt the deck edge to that. The Hancock kit got some travel damage to the hangar deck, so that will have to be repaired too. But I think this is a good start to the project.
19 June 2023, 19:52
![](/profiles/img/15656-162-s.jpg)
The hangar doors present a compomise that I can't accept, showing some inside detail but with all gates closed down and an exaggerated thickness. I decided to remove all of them, beginning with the Hancock sprue. You can compare with the original Essex sprue. To replace the partially closed doors, I can choose between Evergreen grated plates (subtler paneling though one-faced) or the same metal foil as used earlier.
24 June 2023, 22:56
![](/profiles/img/15656-162-s.jpg)
The walls of the Hancock are now built. I found out that there are not enough Pontos PE doors of one design to replace all plastic ones, so Hancock and Essex will be getting a different type. A drawback to the hangar walls is the absence of locator holes. I made some pins myself. The plane cockpits were not in stock and will arrive later.
31 March, 01:55
![](/profiles/img/121979-911-s.jpg)
Read a lot about the Essex-class carriers, really interesting history and very interested to see how your ships turn out 🙂
31 March, 02:02
![](/profiles/img/15656-162-s.jpg)
Thanks, Rando. Today the second ship's hangar was closed off. In the Essex model I didn't need to remove a part of the hangar deck, so now there's a minute difference in the distance of the rear deck to the island structure. The fault should be in the Hancock bow section. I closed down some of Essex hangar doors, but I kept a peeping hole for the elevator shaft that I moved to the right like in Hancock.
2 April, 00:02
![](/profiles/img/45816-678-s.jpg)
This is some project Steven. These are not exactly small models (i have one myself - CV-13 USS Franklin)....and so much extra detail you are adding. Watching in admiration. Great work so far.
2 April, 06:18
![](/profiles/img/15656-162-s.jpg)
Thanks, Gary. The first PE parts are bent for the stern and the boat cranes of Hancock, after the hangar wall seams are removed with Tamiya filler. One part of the wall is badly fitting and needs to be shortened.
5 April, 01:27
![](/profiles/img/15656-162-s.jpg)
Lots of PE particles are now assembled to giant deck support structures. I accidentally used the Essex front deck instead of the Hancock one, so I had to remove the PE plate causing half of the ribs to jump of again and restore this to the Hancock deck. Now I'm about to begin the same again for Essex, that has a slighty larger hollow under the flight deck.
8 April, 01:40
![](/profiles/img/45816-678-s.jpg)
Nice progress Steven. Shame about the mix up but we all human, im sure at one point we have all used a wrong part or miss assembled.
Keep up the good work....and enjoy your build time.
8 April, 10:01
![](/profiles/img/15656-162-s.jpg)
Thanks for the acclaim, now Essex is also loaded with PE parts under the front deck. I also removed the rear lift floor in the hangar deck, because it will be visible through the side doors. The deck edges are getting PE plating with the correct catwalk acces doors and fire station hatches, but I'm still thinking about methods to remove the space behind these PE parts. Drilling is not enough.
12 April, 12:38
![](/profiles/img/15656-162-s.jpg)
Thanks Gary. The update today shows the reshaping of the Hancock bow. The angle of the kit bow is too shallow, so I cut out a wedge in the side and plied it back. The bottom part was split and clamped shut tighter, using sprue "rivets" to hold it closed. A lot of sanding followed, even after I had installed the port 40mm hubs on the hull. Another problem were the 18 doors that needed to be removed from the island structure, so I used my Proxxon for that. An extra is the comparison between 5inch/38 mounts from the kit, Flyhawk (yellow) and Pontos (Brown). Pontos is more detailed, Flyhawk has PE details and the kit is built up from different parts.
20 April, 10:19
![](/profiles/img/15656-162-s.jpg)
Thanks, Pietro. The islands now both have all watertight doors, and Hancock's island is already a bit further down the line sporting ladders, a PE walkway, the pri-fly cabin and a almost fully equipped smoke stack. For a movie about choosing the right watertight door in your model, see Youtube Video . I did find the correct type on some detail pictures in my books.
![](https://img.youtube.com/vi/DmaTJTPfXA4/maxresdefault.jpg)
23 April, 13:24
![](/profiles/img/15656-162-s.jpg)
A 45 picture update about Hancock's island. I made changes to the building plan where I saw the reference pictures didn't follow them. Loudspeakers were added. A cutout in the bridge deck was removed. The venturis on the different levels were added, but some don't extend far enough. Some of the PE hatches on the director towers needed to be scrounged from the ABSD project remains. All kinds of radar antennas are added, some I didn't find or identify yet, like the "stovepipe" antenna encircled on one reference picture. The SC-2 radar needed to be put on the platform for the side SK radar position. I did make the rear mast for the smokestack position, but removed it again because there is no trace of it in the reference. It might still be used on Essex.
26 April, 00:35
![](/profiles/img/15656-162-s.jpg)
Thanks Christian. Again a large update with changes to the Essex island. The front structure is made identical to Hancock and some scratched galleries are added. I decided to move Essex to the march 1945 scheme. Pontos has some parts for 1944 Hornet that are useful here, like the bridge walkway. Some areas like the stern will have to be adapted too. The same radar antennas are used, but some of them on different positions. I now added more airplane PE to the inventory, some of these should be finished to be able to close down the hangars.
2 May, 13:12
![](/profiles/img/15656-162-s.jpg)
The Avengers are now getting their PE cockpits, and the interior of the hangar is painted white.
6 May, 00:59
![](/profiles/img/15656-162-s.jpg)
Thanks, the airwing continues with the Helldivers, the Hellcats and the Corsairs, that had the hardest fit, so it's a good thing I had only six of them. I still have the same amount of planes not getting a cockpit.
8 May, 00:25
![](/profiles/img/15656-162-s.jpg)
Detailing of the port air outlet, the catwalk and starboard galleries of Essex. For Hancock it's only the outlets that were repeated. At first I was cutting small mesh parts, but it's better to cut them as a whole and add a PE crosshair. In the Trumpeter planes there is a tendency in the wing base to be cast offset (see color image) resulting in a skewed wing position when the fuselage halves are assembled. I'll often have to correct the angle. All plane fuselages have been fixed now and in the Helldivers and Avengers the seams are already filled and sanded.
11 May, 00:36
![](/profiles/img/15656-162-s.jpg)
The Helldivers are first to be completed with PE parts. The Pontos airbrakes are an improvement over the kit ones, and they can both be used for stretched wings or retracted ones. I drilled open the wheel wells. In the Hellcats, the cowling is incorrectly cast with one lower opening, so I shoved a node in each one and sanded it flat. A new opening is drilled and an oil cooler vent is then cut out under that. Takes quite a while.
14 May, 15:06
![](/profiles/img/15656-162-s.jpg)
The Hellcats are now all having a revised cowling and they also have a brass tube for the new prop position. The wheel wells are all drilled out and I made 10 scratch pairs because I only have 32 Pontos pairs for 42 Hellcats. For the Corsairs the wheel wells are rectangular which is a real pain to scrape out. The Avengers are still to be detailed, beginning with the tail wheels.
18 May, 00:52
![](/profiles/img/65234-189-s.jpg)
That are quite a lot of planes you're doing.Defintely will complete the build
18 May, 11:59
![](/profiles/img/15656-162-s.jpg)
I think so, Lode. Don't you fancy a carrier build yourself? You probably have a Yorktown 1/200. Today the painting of the airplanes was started. The wings are painted white but this I might have to redo in grey, they're too coarse. The planes are in grey now. I cut out the propellers and I needed extas for the Hellcats, so I changed the 6 optional 4-bladed Corsair props into 8 3-bladed ones.
21 May, 01:35
![](/profiles/img/21096-573-s.jpg)
ton of little airplanes will certainly make a great flight deck, picture 359 seems an MC Escher design 😉
21 May, 06:23
![](/profiles/img/15656-162-s.jpg)
Currently these planes are enveloped with gum to spray the camo on them. This is extremely tedious because the gum is not always adhering well and it must be sculpted exactly the same on each plane. I now painted the hangar floor in Lifecolor Deck Blue 20b (don't mind the overspray) and I also built the side elevators. This is a very nice fit from Pontos, but the netting supports are erroneously numbered 36 and this part is not abounding, nor does it fit the purpose. In stead of it should be used part 10, that was left in just the right numbers. The repair of the 5 inch/38 resin housings was first done with putty but then I wanted the outline to be improved and I made impressions with a knife flat and a drop of CA. Then break off the knife and a straight edge will result.
24 May, 15:21
![](/profiles/img/15656-162-s.jpg)
The 5 inch guns are now all detailed according to reference pictures of the ships. Essex was different than Hancock, it had no blastbags nor ladders. But in the end I noticed I used the wrong type of ladder, so maybe those will be removed. For the single guns one double gun barrel was wrongly shipped, so I lengthened that one with a 1mm Albion tube. Also some small parts are not provided in the needed quantity, or the option of placing PE steps was not shown in the manual.
27 May, 12:48
![](/profiles/img/15656-162-s.jpg)
The long range antenna pylons of Essex are according to the Pontos manual, but they copied this for Ticonderoga and that's incorrect. The 3d pylon should be left out for long hulls and so I can drop a 10th pylon for Hancock. One of the ladders for that can be used to complete the double 5 inch housings. Because of much unclarity in the manual I made many wrong folds on the catwalks and had to reassemble lots of parts with stress cracks. Also the deck edge elevator has a chain lift system that is now constructed out of a very fiddly frame that also breaks easily. But the end result is sturdy enough.
31 May, 00:43
![](/profiles/img/15656-162-s.jpg)
All planes are now in sea blue and ready for the last camo paint. The prop tips are painted in yellow. Some wings were stripped, others were overpainted in light grey.
5 June, 10:50
![](/profiles/img/15656-162-s.jpg)
Midnight Blue is almost completely added on all planes, only the Avengers still need the tail completed. Some of the wings had orange peel and were redone.
7 June, 01:02
![](/profiles/img/15656-162-s.jpg)
Thanks Gary! It went on with the elevator shafts, the Avenger tail colors, the propellers that were masked with a metal roundel (after 2 hours I now have painted about half of them black - on two sides!) and then finally the cockpit set arrived and I soon had some new Helldiver and Hellcat cockpits. I wanted the Dragon Avengers to have a PE cockpit too, but this was a very tight fit even afer milling as far as I could in the fuselage interior.
11 June, 23:59
![](/profiles/img/15656-162-s.jpg)
Thanks, David. Now it's decal time. 196 roundels on the wings, as many on the tails and again for the callsigns on the tailplanes. Essex has a horizontal white line that was trimmed with scissors and Hancock has a horseshoe. Still some more are coming, but for the numbers some research will be necessary. All decals were treated with Daco Sol. Plane interiors ar painted Vallejo Interior Green. Hellcat propellers are also painted.
14 June, 00:28
![](/profiles/img/15656-162-s.jpg)
Thanks for the comments! Today most of the canopies are cut up, ground thinner and applied to the fuselages. I'm left with the Hellcat open canopies, these just don't look the part and I will probably have to remove part of the tail to fit these.
1 July, 22:58
![](/profiles/img/15656-162-s.jpg)
I found a hack for making the perfect 1/350 Hellcat open canopy. Use 1/700 two-bar railing cut to four stanchions and bend this over the middle. By now I have placed all clearparts on the airwing. I now started t add the number decals on the Helldivers. You shouldn't follow the Pontos Hancock tailfin indications, these appear wrong as the number is always below the omega sign.
3 July, 20:01
![](/profiles/img/15656-162-s.jpg)
Thanks, Gorby. All crates now are sealed with Pledge and the props are installed. For the Helldivers I needed to scratch prop spinners out of clipped spheric node ends.
6 July, 00:49
![](/profiles/img/15656-162-s.jpg)
Tamiya grey panelliner wash is used on the top side of the airwing. I will be using a different shade for the bottom.
10 July, 00:36
![](/profiles/img/15656-162-s.jpg)
A brown wash was done on the grey undersides of the planes. The also got rigged, each of them with a scrap PE antenna mast. The Avengers got guns in the turret and now I will paint all the canopies on the outside.
12 July, 00:41
![](/profiles/img/15656-162-s.jpg)
All surfaces got a matt cote with Vallejo Polyurethane varnish, for the other side I avoided the gum because it removed some of the decals. Then all the wings could be fixed with a little drop of CA glue. There are no fitting locks for the stowed position of the wings, so all of them had to be manipulated in exactly the same position.
15 July, 00:38
![](/profiles/img/15656-162-s.jpg)
And more still to come. The update shows the closing down of the hull bottom with a waterline plate, that needs to be filled in with a lot of CA to get a smooth fit at the bow. The anchor deck is painted and the anchor chains are added (1 set was sufficient for both). The rear elevator shaft of Essex got a trompe-l'oeuil bottom part because the extreme right side is visible from the outside through the hangar hatches. The bow portholes are deformed because of the modling and are all replaced with Pontos portholes, of wich you get enough to complete the hull.
18 July, 00:22
![](/profiles/img/15656-162-s.jpg)
The decks are closed down after sanding the bottom. Some of the Pontos PE is interfering with itself, so that's clipped. I have some overview pictures for you, with the island and main guns in dry-fit. Now the catwalks can be added.
20 July, 00:25
![](/profiles/img/20442-422-s.jpg)
Remarkable work!
I still can't get over that you are building two 1/350 carriers at the same time. Madness I tell you. 😉
20 July, 04:50
![](/profiles/img/15656-162-s.jpg)
There is reason in it. For example the catwalk supports you see in this update, in stead of stopping at assembling 75 for one ship, you can do another batch for the second one, in stead of finding yourself a few years later in front of that task with the memory of those first 75 ones and having to do that all over again. I even found errors in one Pontos instruction that could be corrected with the other one.
Further in this update: fixing a sag in the deck caused by tensions in the connectors, just saw through the connectors after the deck is fixed to the hull. Also the ladder booms and a lot of Pontos steps that are either not present where expected to not fall off the ship, or that are mentioned in the manual but not used on the pictures. I also fixed the antennas to the catwalks.
25 July, 23:45
![](/profiles/img/15656-162-s.jpg)
There is enough material to build 25 quadruple 40mm Bofors, so I made them. Nevertheless you only need about 8 per ship. Now I'll start on the 130 single Oerlikon 20mm guns. Here the margin is much less, but the fit of the stands is bad so they have to be clipped a bit.
30 July, 20:54
![](/profiles/img/15656-162-s.jpg)
It seems that in 1944 Essex' gunshields were modified, so I had to remove a part from them. For the Hancock model this is not necessary. Every step in the 20mm guns is repeated 125 times, so that takes a toll.
1 August, 23:45
![](/profiles/img/20442-422-s.jpg)
Every time I see this I'm blown away by the effort you are devoting to it. You certainly have a lot more patience than I have.
2 August, 06:32
![](/profiles/img/15656-162-s.jpg)
With these little guns it's tested daily, Gorby. But now they are all done and painting can almost begin. The Hancock 20mm guns were finished when the handwheels were added, but the Essex guns are like on the reference pic and needed an Evergreen Mk.14 visor and a piece of scratch PE for the air feed pump.
4 August, 20:40
![](/profiles/img/15656-162-s.jpg)
In this update I scratched the fuel lines on the hulls, covered the deck ends with sheet metal, made the directors, added all Carley floats and placed the HF-antennas and some missing stuff on the islands.
7 August, 09:58
![](/profiles/img/15656-162-s.jpg)
The floater net baskets are made while the Deck Blue parts are masked on both ships. I tried out the excellent Eduard searchlight sets and used this on both, they outshine the Veryfire ones I used on Hancock first. Now back to the tedious masking of Hancock.
11 August, 00:57
![](/profiles/img/user-s.jpg)
I never thought I would say this......they're "bulkheads", not "walls". Forgive a former carrier mariner, but some of the lingo they jammed into my brain stuck. I also can't stand movies with officers wearing their lids indoors. : ) Your PE work is inspiring!
11 August, 02:00
![](/profiles/img/95177-962-s.jpg)
Impressive amount of photoetches and details, my head is spinning, admiration and respect!
11 August, 09:17
![](/profiles/img/15656-162-s.jpg)
If my work attracts the real carrier operators, I feel as humble as a pollywog. Thanks for the replies, today you can see the finishing of the masking phase and the Gunze primer coating. I used cardboard to close up the hangar hatches, I made it fit well enough to not need any glue. The next coat will be a complete cover of all parts with Lifecolor pale grey.
13 August, 22:47
![](/profiles/img/15656-162-s.jpg)
The hulls are at last painted black and can be unmasked. Some overspray was inevitable and can be removed with post-shade. The deck is first tainted with Gunze Midnight Blue and then faded with a light sand primer. Transverse girders are marked with an Aqualiner. To Hancock I added a paravane guide to the bow. The deck fit of Essex was perfect, now let's check out the other one. When the island is dry-fitted, it seems to have the right look from the pictures.
23 August, 00:43
![](/profiles/img/user-s.jpg)
aloitti tämän kohteen
![1:350 HARUNA Operation Sho-Ichigo/Dazzle Camouflage Detail Up Photo-etched For Fujimi No.60055/60079 (LQ&D NAVY YARD 202403) 202403](/products/img/7/4/0/1572740-119063-75-t180.jpg)
HARUNA Operation Sho-Ichigo/Dazzle Camouflage Detail Up Photo-etched For Fujimi No.60055/60079
LQ&D NAVY YARD 1:350
202403 2024* Uusi työkalu 24 August, 22:16
/fi/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=fi
35
35
/fi/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo