Uutisvirta

Martin Oostrom
Another ghost build that started in my vacation. All parts are ready for paint, unfortunately the weather isn't cooperating.

Alexander Grivonev
What's with the weather in your corner of the world😄
too warm?

Martin Oostrom
Too windy and wet. I can't open my window to let the hose from my spray booth out. Rain will come in 🌧️

Martin Oostrom
Wind from another direction today, so primer is on.

Martin Oostrom
Painted with Zero paints Jordan yellow. Needs another coat or two

Michael Kohl
Following.
PS: you can guide your hose into a bucket with a bit of water and a lid with an airvent.
Check: How to use a bucket to vent a spray booth on Youtube. I will build myself one too as the concept looks very convincing.

Spanjaard
nice yellow color!

Ben M
👀

Martin Oostrom
The yellow needed 7 more thin coats. More than half a jar was used on this small car.

Ben M
That's yellow for you!

yngvenett
Following this

Alexander Grivonev
Hey Martin, you can buy colored primers like yellow or red. 2K as well.

Martin Oostrom
Thank you gents.
I have black, yellow, white, pink, three kinds of grey and rustoxide red primer. But the zero paints yellow "needs" 2k and that is one of my greys. That paint is soooo thin with colour. The decanted ts-16 on my Aussie truck covers so much better.

Martin Oostrom
Assembly has started. Most has been done. Now the body needs clear coating.

Guy Rump
Interesting, following. 👍

Cuajete
Interesting construction of barbed wire 👌

Xa Char
Thank you Cuajete, cheap and easy.. 😉

Steven Van Dyck
Proficiat, sorry I couldn't be there yesterday.

Nik Watson
Superb, lots of detail in a small scene. Love the barbed wire technique. 👏👏🍻

Bas Tonn
Great !!
How did you make thise trees if I can ask?

gorby
Nice dio!
I like the idea to make barbed wire as well.

Xa Char
Thanx Steven, Nik and Bas 🙂

Bas,
Trees are made with old trees from a railroad, cleaned from "leaves". Then I glued branches of zeeschuym with CA glue and painted the whole tree brown.
For leaves I have mixed some dried parsly in small pieces and used those for leaves.

Xa Char
Thanx Gorby

Cuajete
Wow... fantastic scene. Great result! 👌
Congrats!

More pics, please?
What is "zeeschuym"?
Thanks!

Bas Tonn
Thank you Xa !

Villiers de Vos
Very nice work.

Fafa
Thanks a lot Villiers de Vos

M4A1
Does anybody know if there is a webshop in the European Union where separate Asuka sprues can be ordered?

M4A1
Finished assembling the bogies. Always nice to have 6 bogies assembled considering the amount of parts per bogie.

M4A1
Added the bogies and put the both hull parts together. It's dry fit. But it shows that this Firefly is coming together nicely.

M4A1
Working on the base of this project. The Sherman is ready to be painted.

M4A1
The Firefly had it's coat of black primer.

Ben M
Looks great so far!

M4A1
Thanks Ben!

M4A1
The Firefly has got it's base color. It's Tamiya olive green made lighter with Tamiya lemon yellow. When I'm done wheatering the tank will have a darker tone. I've started with chipping before adding washes and drybrushes. This time I've used chipping medium of Vallejo. It's the first time I'm using it. The Sherman got 2 layers of grey, dark and light, and the olive green color. After each grey layer I applied a layer of chipping medium. In the tutorial I've watched it looked pretty easy, in reality I found it quite challenging. On some spots more green paint came off then intended. Clearly I need to find my way with this technique.

M4A1
Started painting the details and adding decals. Always brings a model to life.

M4A1
Gave the Sherman a wash to make it darker.

Doubtingmango
Watching

Mr D
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍

J35J
I'm in!

Mr D
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍

Miguel Vaquero
Looking good mate. Following!!

Mr D
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍

Robert Podkoński
Joining the party!

Mr D
Thanks Robert, good to have you on board 👋😀👍

Miguel Vaquero
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?

Mr D
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍

Doubtingmango
Brilliant! The putty really can create a mess with finely molded details

NLAWScametovisit
This is extremely clever!!!

Mr D
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???

Kesa Tiho
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep

Landlubber Mike
Looking really good Mr D!

Mr D
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍

Miguel Vaquero
I got to get myself a chrome pen. The result on those details look awesome

Mr D
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.

Alexander Perov
Do not forget that the mast of the antenna passes through the windshield and is very clearly visible. This model may come in handy in my albums

Mr D
Ok thanks Alexander, HB didnt make the Mast installation very clear, the show it just glued on the top, will be very weak!! I've seen one build and it's come away!!
I'm going to use steel rod.
👍👍

Guy Rump
Following with interest! 👍

Mr D
Thanks Guy.... good to have you around 😃👍

Miguel Vaquero
Looking amazing. That camo Is on point 👌👌

Mr D
Thanks Miguel 👍 the office-tak used to mask.
Will try panel lines n wash for first time on this one
😁👍👍

gorby
Looking excellent so far!

Mr D
Thanks Gorby 😁👍 Appreciate it.
Got the Flat Clear on now....look at some chipping next.

Mr D
Cheers Garry V👍👍

Trez
Smart kit, like the bubble canopy and cockpit is a little different. Assume they based this craft on the Fw190…

Mr D
Hi Trez 👋
Yes they were heavily influenced by German technology, the Germans wanted them to help support on the eastern front and protect the oilfields there.
It's a nice looking Aircraft, l liked the colour scheme and thought it be nice change n addition to my collection.
Canopy a nice easy mask.
😃👍

Zbynek Honzik
I must say, this project of yours is turning out very nicely, Mr D! I'm enjoying watching it! 👍🙋🏼‍♂️

Mr D
Thanks Zbynek😁👍
Great to have your interests, nearly there now, l can get started on the paint on my Beriev Be-6 soon.
👋👍

Mr D
Cheers Jose👋👍

Miguel Vaquero
It's turning out a beauty!!

Mr D
Hi Miguel 👋, thanks 👍
Just Antenna work n few little bits to finish.
Waiting for some 0.1mm stainless wire.

Alexander Perov
Well, they said, they said, and you did everything wrong, probably you never looked at this model in my albums

Mr D
Hi Alexandra.
I only just found your Album on IAR,
It's very good.... I've only been in the hobby for Months and im learning really, l know the antenna isn't accurate, l wanted it to be strong n durable.

gorby
Only a tiny number of people will either know or care if the antenna isn't accurate Mr D – I didn't know and now that I do, I still don't care. 😄
The antenna looks good and that's all that matters, that fact you've managed to get as good as you have at modelling in such a short space of time is remarkable.
At the end of the day it's only a bloody model and this is only a bloody hobby – not a moral crusade to populate the planet with totally accurate replicas of the real thing. I haven't got a problem if other people want to count every rivet on their own model, but annoys me when they expect it of others.
Just have fun. 🙂

Robert Podkoński
👍

Mr D
Hi Gorby 👋😃.
Good to catch up.
Thanks 👍 lm happy as with it as l see I've improved a bit on previous models.
The Antenna design was begging to break n go wrong the designed way, first antenna...l want to play bit safe.
Everyone has different abilities and l respect them all.
Good luck with your projects 👍

Mr D
Hi Robert 👋😃👍

Robert Podkoński
Trez has asked about the origins of this plane - in fact the whole fuselage was taken (copied) from PZL P.24, of which Romanians have acquired the licence before the II WW.

Mr D
Hi Robert 👋.
I will have to look up the PZL P.24 .
There is a YouTube video about the IAR-80 l watched it was quite interesting, the Germans supplied them with some tech, l know the fuselage had to be extended to get CG right.... hence the long fornt-end.
I really liked the look of the model and the colour scheme..... I thought it would make a nice addition to my display.....bit of variation.
The Soviet's ended up with a few after the war .....and used them as fighter trainers....Just green with red star.

Mr D
Hi Zbynek 👋... thanks 👍

Robert Podkoński
This is a very cool looking airplane indeed, Mr D.

Mr D
Thanks for your likes everyone 😁👍
Almost finished.

Spanjaard
strange, I just commented in two albums, and I could see them on top of the newsfeed.
anyway, bugs are to be reported (if I am not mistaken) in "Feature request" instead of "Data suggestions"

Spanjaard
if you still have the issue, I suggest that you provide a link to the album where it happened and some information about browser used etc, I am sure our webmaster will ask just for that 😉

scalemates
just tested, and it works. did you maybe have a filter enabled?

Skyhiker
No, It was happening for about a half an hour. I'm not sure why but I know I didn't have a filter on. It's working now so it must have been a fluke. I'll let you know if it happens again.

scalemates
thx! (will mark it as fixed, but can reopen if needed)