- SH-60 Seahawk

1
January 11, 2013
The Armycast.cz resin
2
January 11, 2013
3
January 11, 2013
One those bits is one the wrong side, they are part of the colective and must be on the left of both pilots
4
January 11, 2013
Drilling and cutting
5
January 11, 2013
6
January 11, 2013
It looks like I've cut too much and there is a correction to make
7
January 11, 2013
8
January 11, 2013
9
January 11, 2013
starting to change some parts
10
January 11, 2013
The "joystick" is a bit like a plane, so I've build them new heads, remember to cut them because they are too high (see the red arrow)
11
January 11, 2013
Changing the panel, but do dry-fit it with the glass, you may have to reduce it a bit
12
January 13, 2013
Working on the pilot door
13
January 13, 2013
Reduce the side door thickness
14
January 13, 2013
Use the door to align the pilon
15
January 13, 2013
Cutting door glass and remove wipers
16
January 13, 2013
17
January 13, 2013
Adding texture to the pilots chairs and stretchers for the small chairs
18
January 13, 2013
The rebuild joystick and new colectives
19
January 13, 2013
20
January 13, 2013
21
January 13, 2013
22
January 13, 2013
23
January 13, 2013
Mask and spray those stripes on the floor like you've never seen an airbrush, to give the non-slip floor look 😉
24
January 13, 2013
25
January 13, 2013
26
January 13, 2013
27
January 13, 2013
Now I don't want to put the celling and close to hide all of this 🙁
28
January 28, 2013
29
January 28, 2013
30
January 28, 2013
31
January 28, 2013
32
January 28, 2013
33
January 28, 2013
34
January 28, 2013
Meanwhile let's work on the rotors
35
January 28, 2013
Accidents happen, but one thing is sure: in case of future accidents this Blade should be the only one that is sure to endure
36
January 28, 2013
37
January 28, 2013
And now the scary part, gluing the two half This time progressively in three phases from tail to nose.
38
January 28, 2013
39
January 30, 2013
Thanks to "Robertas Vasiliauskas" and "Austin K" for this detail, I didnâ€™t notice that the kit blades were the army version, and had to cut them to the Navy style
40
March 10, 2013
41
March 10, 2013
42
March 10, 2013
43
March 10, 2013
44
March 10, 2013
45
March 10, 2013
46
March 10, 2013
Even using the kit out of the box this detail i'll look better
47
March 10, 2013
48
March 10, 2013
49
March 10, 2013
50
March 28, 2013
dilemma: As I am a large paws I bet I'll break the antennas if I glue them before painting. On the other hand if glue them after I'll get some CA glue spots and paint less homogeneous
51
March 28, 2013
So me and my friend with the helmet build some rigs in Lego and now only touch the model as little as possible, let's see ... First a thin layer of color base and then the shading of the panels
52
March 28, 2013
It may not be very clear but in the Seahawks the gray underneath is lighter than the rest (some instructions do not show this and others show a 3rd darker gray on top)
53
March 28, 2013
The old trick to avoid a hard transition between both gray
54
March 28, 2013
The rest is the mask and paint, mask and paint, mask and paint ...
55
March 28, 2013
56
March 28, 2013
Next color: Black
57
April 3, 2013
Here is the metal detector
58
April 3, 2013
I know that making masks is really boring...
59
April 3, 2013
... but I think it gives a nice touch to some details
60
April 3, 2013
Scorpion placed and now letâ€™s seal it and give some light weathering
61
April 3, 2013
62
April 11, 2013
Applying oils - Only with a fine brush through the lines and wiping a few minutes after
63
April 11, 2013
Here is how I have led and glue the wire point-by-point (and itâ€™s 6 points in this one ) A clamp to make weight and â€œLegoâ€ to give the right height and guide the wire to the right spot to glue, then put a bit of CA, wait and go for the
64
April 12, 2013
I was going around and around trying to make the very small covers of the air intakes until I came up with this simple idea: Paint sculpt paste and when itâ€™s dry, but not totally hard, just mold it in place
65
April 12, 2013
66
April 12, 2013
67
April 12, 2013
68
April 12, 2013
69
April 12, 2013
70
April 12, 2013
71
April 12, 2013
72
April 12, 2013
73
April 12, 2013
74
April 12, 2013
75
April 12, 2013
76
April 12, 2013
77
April 12, 2013
78
April 12, 2013
79
April 12, 2013
80
April 12, 2013
81
April 12, 2013
82
April 12, 2013
83
April 12, 2013
84
April 12, 2013
85
April 12, 2013
86
April 12, 2013
87
April 12, 2013
88
April 12, 2013
89
April 12, 2013
90
April 12, 2013
91
February 8, 2014
Finally, with its base
92
February 8, 2014
Finally, with its base
93
February 8, 2014
Finally, with its base

Kommentit

6 11 January 2013, 18:58

ole moller
are you a micro surgeon?some outstanding work in 1/72 i would never try to attempt it at that size

28 January 2013, 22:08

Vitor Hugo Sousa
1/72, what else?😉

28 January 2013, 23:17

ole moller
you are truly a mad man,do you always work in 1/72?or do you go wild with 1/48?lol

29 January 2013, 11:16

ole moller
well what else can i say,using needles for barrels at this size is genius,and the blade repair is awesome,though i tend to use pins snapped to size,i`m doing a biggish job on a 1/24 plane and i struggle with this size and you seem to relish in it,fantastic

29 January 2013, 11:22

Robertas Vasiliauskas
Hi Vitor,
pilots seats is in bad position (need push to forward), also yuo need cut rotor blades tips. Model contains army style blades.

29 January 2013, 14:45

Vorya hidaryan
wow.top job Vitor.👍

29 January 2013, 15:21

Vitor Hugo Sousa
Thanks for your comments guys.
*ole moller: 1/72 is my scale, maybe one day i'll try a rotor on 1/48 (if I can finish it)
* Robertas: Thanks for your sharp seeing, in fact the seats are to far back, as I'll open one door i thought I could put them a bit back as they are on rails, but seeing again real photos now I see they are a bit far.
Now what do you mean with "cut rotor blades tips"?
I've been comparing with photos and didn't understand it
[img1]
[img2]

29 January 2013, 19:52

Vitor Hugo Sousa
*Robertas: I see it now, "Austin K" show it to me in another post😉 Thanks mate

29 January 2013, 21:13

Robertas Vasiliauskas
Vitor,
sorry, I work in the evening. Austin good Hawks spec, thanks him.

30 January 2013, 13:10

Vitor Hugo Sousa
thanks both😉

30 January 2013, 14:06

Holger Kranich
Tse, i´m watching and watching and totally forgot to say: Marvelous work, Vitor! Great job in 1:72! 👍

30 January 2013, 14:20

Duncan Cook
Are you using a microsopce Vitor?😉

30 January 2013, 14:44

ole moller
an electron microscope i think lol

30 January 2013, 16:46

Vitor Hugo Sousa
eh eh eh, I just use a magnifying glasses and a lot of patience 🤔

30 January 2013, 17:38

Frank Krause
@Vitor: I guess the last one you need a lot for such tiny parts! Stuning work, can't repeat it enough! 👍

30 January 2013, 18:31

Michel Huijghe
This is stunning considering how tiny it is. 🙂

10 March 2013, 19:02

Pierre-Christian Baudru
Otimo trabalho Victor !

11 March 2013, 09:35

uncle chop chop
Wonderful work i love it

12 March 2013, 10:18

Luc B
awesome progress!

12 March 2013, 22:08

Harry Eder
Holy s**t !! Thats cool man ! Carry on !

13 March 2013, 08:22

Vitor Hugo Sousa
Thanks guys😉

13 March 2013, 08:57

Dave Flitton
Awesome work!!

13 March 2013, 12:42

Vitor Hugo Sousa
At last some color in it😉

28 March 2013, 09:38

Holger Kranich
Wonderful pre-shading!

28 March 2013, 09:40

Fernando Ripado
Bom dia. Muito bom mesmo. Onde arranja o Alclad e Mr. Surfacer em Lisboa?

28 March 2013, 10:20

Vitor Hugo Sousa
Os que comprei foram on-line em lojas de Lisboa, ou na zmodels.pt ou na vlmodels.com.
Mas creio que a casa Antunes no CC do Martim Moniz também terá, é ligar para lá. Aqui fica uma listagem dos contactos das lojas físicas em Portugal forum.modelismo-na.n..t=14542&start=90

28 March 2013, 10:33

Michel Huijghe
Great improvements.

28 March 2013, 10:58

Fernando Ripado
Estive lá antes de ontem e não reparei. Acho que vou lá vou voltar. Gostava de experimentar. Agora as outras duas que indicou desconhecia em absoluto. Obg.

28 March 2013, 11:00

Pierre-Christian Baudru
Muito bom Victor, estou de oho !

28 March 2013, 11:19

Luc B
Splendid! love the progress you have made!

30 March 2013, 11:15

Tim Vereecke
yummie! 👍

30 March 2013, 20:15

Vitor Hugo Sousa
Thanks Guys😉

30 March 2013, 22:38

Vitor Hugo Sousa
Decals on😉

3 April 2013, 23:41

Vitor Costa
Uindo!!! I like it! But i think you miss something there!! on the console... the white/red stick paper 🙂

3 April 2013, 23:53

Duncan Cook
Oh that looks great Vitor. I havent seen that collours before.

4 April 2013, 13:35

Vitor Hugo Sousa
🙂 Completed 🙂

12 April 2013, 10:53

Vitor Costa
Que maravilha! O teu melhor trabalho até hoje, (na minha opinião) Parabéns.
Congratulations, your best work ever! (on my opinion).
😄

12 April 2013, 13:01

Vitor Hugo Sousa
Thanks Mate
Obrigado Mate
[img1]

12 April 2013, 13:21

Mohammad Adl
I enjoyed see them. I love it. Congratulations Vitor. 🙂

12 April 2013, 15:16

Philip De Keyser
Awesome job Vitor, great details on this little chopper and a great paintjob, I love it 👍
Greetz Phil

12 April 2013, 15:38

Maarten Kruizenga
Absolutely stunning and fascinating photo sequence!!

13 April 2013, 09:37

Eric Juvyns
Damn, that's one fine looking Seahawk.

13 April 2013, 10:06

Luc B
this is an awesome looking Seahawk! congrats and thx for sharing

14 April 2013, 09:41

Duncan Cook
Nice one Vitor. 🙂

14 April 2013, 11:14

Vitor Hugo Sousa
Thanks guys😉

14 April 2013, 19:07

Erik Fidder
Wow this is just stunning. Great work on the colors and the details.

14 April 2013, 22:24

Vorya hidaryan
Awesome!

15 April 2013, 05:24

Ralf Schuster
Respekt... Nothing more to say... only... Respekt!

15 April 2013, 06:26

Harry Eder
Fantastic work !!!

15 April 2013, 06:33

Pierre-Christian Baudru
Ficou um otimo modelo, parabens !

15 April 2013, 10:34

Michel Huijghe
Stunning.

15 April 2013, 11:45

Wim van der Luijt
I especially like this comment of yours after spending so much time on minute details "As I am a large paws I bet I'll break the antennas if I glue them before painting" 😄

Great project!

15 April 2013, 11:55