mittakaavan mallintamistietokanta | stash manager
Little Airwolf
Steffen Tittmann (Little Airwolf)
DE

CAC CA-13 Boomerang

Kommentit

28 January 2013, 13:55
Steffen Tittmann
Since the motor and the cockpit are too large the hull had to be ground inside.
Da der Motor und das Cockpit zu groß sind mußte der Rumpf innen geschliffen werden.
28 January 2013, 13:58
Holger Kranich
Jo, schön gemacht! Diese Rohrgittercockpits sind aber auch schön anzusehen!
28 January 2013, 14:05
Steffen Tittmann
@ Holger,
sicher sehen die Rohrgittercockpits gut aus.
Nur wenn sie nicht passen bekommt man das heulen.
28 January 2013, 14:59
Steffen Tittmann
Trotz drückens bekam ich den unteren Spalt nicht zu, deswegen wurde mit Plastiksheet gearbeitet .
Despite pushing I got the lower gap not, so worked with plastic sheet.
28 January 2013, 15:02
Holger Kranich
Ja, das stimmt! Wenns nicht passt, könnt man kotzen! Sieht trotzdem sehr gut aus!
28 January 2013, 15:05
ole moller
this is one dog of a model you are making,when you finish you should get a medal for gallantry
28 January 2013, 15:32
Steffen Tittmann
@ Holger und Ole,
thanks.
28 January 2013, 16:11
Steffen Tittmann
So es wurde gespachtelt und geschliffen.
So it was primed and sanded.
28 January 2013, 16:57
Steffen Tittmann
So es kamen noch ein paar Teile ran und dann gings zum spachteln und schleifen.
So it came even ran a few items, and then we went to the filling and sanding.
29 January 2013, 17:31
Holger Kranich
Nearly ready for the paintjob!!!
29 January 2013, 17:34
Michel Huijghe
Seriously fit problems.
29 January 2013, 17:47
Steffen Tittmann
@ Holger,
nein ein "wenig" Spachtelarbeit ist noch. 😉
@ Michel,
There were more problems than expected
29 January 2013, 18:27
Urban Gardini
After this one you're gonna need to get a new tube of putty. Good job so far mate!
29 January 2013, 18:43
Steffen Tittmann
@ Urban,
thanks.
29 January 2013, 19:16
Steffen Tittmann
Viel war heute nicht, es wurden die 4 Browning (7,7-mm MG verschliffen, die CAC bzw. Hispano 20-mm Kanonen kamen dazu und der Zusatztank wurde aufgebohrt.
In dem Zusatztank waren 2 Kameras installiert, das sah ich in meinen Unterlagen.
Today was not much, it was the 4 Browning (7.7 mm MG slurred, the CAC or Hispano 20-mm guns were added and the additional tank was drilled.
In the additional tank 2 cameras were installed, which I saw in my file.
31 January 2013, 16:20
Steffen Tittmann
So heute wurde grundiert, es kamen noch einige Fehler ans Licht die nach Spachtel und Schleifpapier rufen.
So today was primed, it came to light a few errors that call for filler and sandpaper.
3 February 2013, 13:07
Steffen Tittmann
So nun also nochmal Spachtelmasse und Schleifpapier ran und seht selbst.
So now so again ran putty and sandpaper and see for yourself
3 February 2013, 17:46
Steffen Tittmann
So es wurde noch ein paar mal gespachtelt, geschliffen und grundiert.
Heute Nachmittag kommt dann Gunship Green (Vallejo Air Colr 71014) aufs Modell, das entpricht laut meinen Unterlagen Foliage Green der RAAF.
So it was leveled a few times, sanded and primed.
This afternoon is then Gunship Green (Vallejo Air Colr 71,014) onto model that corresponds according to my records the RAAF Foliage Green.
7 February 2013, 10:38
Steffen Tittmann
Nabend,
so dieses Gunship Green war falsch, es wurde jetzt durch 71022 Cam. Green ersetzt
Evenin,
so this Gunship Green was wrong, it was by now 71 022 Cam. Green replaced
7 February 2013, 16:18
Steffen Tittmann
Decals
10 February 2013, 17:16
Steffen Tittmann
Da einige Kleinteile den Weg alles irdischen gingen, warte ich auf die Ersatzteile.
14 February 2013, 15:02
Holger Kranich
Das ist natürlich sehr ärgerlich! Hoffe es geht schnell!
14 February 2013, 18:25
Steffen Tittmann
Ja das hoffe ich auch.
Habe mir aber den nächsten Exoten raus gesucht, eione PZL-23 "Karas".
Mal schauen, schlimmer als bei der Boomerang kann es auch nicht werden.
14 February 2013, 20:50
Holger Kranich
😉
14 February 2013, 21:22
Bill Spargo
WOW, Steffen you have put a lot of effort building this one, congratulations all your effort has paid off. what scale and brand of kit did you use.
14 February 2013, 21:41
Michel Huijghe
Almost finished. 🙂
15 February 2013, 08:06
Steffen Tittmann
@ Bill,
Hi I used the spacial hobby Kit in scale 1/48.Thanks for the praise.
@ Michel,
Yes almost ready, wait now only on spare parts.
15 February 2013, 08:21
Bill Spargo
If you need help with other Aussie aircraft let me know, i will be glad to help
15 February 2013, 08:25
Roland Sachsenhofer
Inspiring work Steffen!
15 February 2013, 08:40
Steffen Tittmann
@ Bill,
Thank you.
It'll come back.
@ Roland,
danke.
15 February 2013, 12:48
Steffen Tittmann
Nabend,
so nun nur noch altern und einstauben und dann sollte sie fertig sein.
Evenin,
so now only one deaf and age, and then they should be ready.
22 February 2013, 16:08
Michel Huijghe
@Steffen
Great and very attractive decals. 🙂
22 February 2013, 18:41
Steffen Tittmann
@ Michel,
thanks.
The Machine was flown in the original by Squadron Leader F/L Walker.
It belonged to the 4th RAAF Squadron Labuan in September 1944.
22 February 2013, 19:43

Kaikki albumit

Näytä kaikki albumit »