English Electric Canberra PR.9 (Airfix)
![Album image #1 Album image #1](/albums/img/3/8/3/317383-10105-25-720.jpg)
Some of the raw materials...
![Album image #2 Album image #2](/albums/img/3/8/4/317384-10105-82-720.jpg)
The lovely retirement scheme. Somehow I expected a larger sheet after paying full price!
![Album image #3 Album image #3](/albums/img/3/8/5/317385-10105-41-720.jpg)
I might use a bit of this kit if necessary - it's probably a better kit than Airfix.
![Album image #4 Album image #4](/albums/img/3/8/6/317386-10105-42-720.jpg)
First problem - vertical tail fillet radius wrong on Airfix - Xtrakit in foreground. Easy fix.
![Album image #5 Album image #5](/albums/img/3/8/7/317387-10105-89-720.jpg)
The Pavla wheel wells (dark grey) are highly detailed and are drop-in replacements.
![Album image #6 Album image #6](/albums/img/3/8/8/317388-10105-36-720.jpg)
The CMK flap parts require some modifications to the Airfix wing to get rid of that step.
![Album image #7 Album image #7](/albums/img/3/8/9/317389-10105-21-720.jpg)
Notice how much has been sanded away from the wing at top.
![Album image #8 Album image #8](/albums/img/3/9/0/317390-10105-96-720.jpg)
Now there's no step!
![Album image #9 Album image #9](/albums/img/3/9/1/317391-10105-84-720.jpg)
Beautiful detail - compare CMK at right, kit details at left.
![Album image #10 Album image #10](/albums/img/3/9/2/317392-10105-20-720.jpg)
Both CMK pieces in place - must remove lip of trailing edge from flap on Airfix wing. This lip is part of the lower flap (the part with the holes).
![Album image #11 Album image #11](/albums/img/3/9/3/317393-10105-76-720.jpg)
Airfix moulded the intake exhaust vent on wrong side of starboard nacelle. Need to make my own.
![Album image #12 Album image #12](/albums/img/4/0/4/317404-10105-76-720.jpg)
Here's what the vents should look like. Note the grates.
![Album image #13 Album image #13](/albums/img/3/9/4/317394-10105-82-720.jpg)
And here they are finished - with photoetch grates from 1:700 ship railing.
![Album image #14 Album image #14](/albums/img/3/9/6/317396-10105-97-720.jpg)
Pavla put a lot of detail into the resin cockpit. I've painted it Gunze H339 Engine Gray and added a black wash.
![Album image #15 Album image #15](/albums/img/3/9/7/317397-10105-60-720.jpg)
Instrument consoles are cut out of the Eduard photoetch pieces.
![Album image #16 Album image #16](/albums/img/3/9/8/317398-10105-81-720.jpg)
The Eduard PE was designed for a B(I).8 cockpit, so a little "bespoking" is necessary.
![Album image #17 Album image #17](/albums/img/3/9/9/317399-10105-16-720.jpg)
I think it will pass for a black cockpit. Dark and darker!
![Album image #18 Album image #18](/albums/img/4/0/0/317400-10105-81-720.jpg)
Ready for installation - Pavla have the wrong mark of ejection seat for the pilot. It is a MB 2CS, it should be 3CS.
![Album image #19 Album image #19](/albums/img/4/0/1/317401-10105-40-720.jpg)
I'll be posing the navigator's door (the nose) open. Need to add more detail to the inside of the nose, including a fold-out desk.
![Album image #20 Album image #20](/albums/img/6/7/5/319675-10105-42-720.jpg)
Inaccurate tailplane root fairing removed. Fillet radius at bottom of vertical fin reshaped as well.
![Album image #21 Album image #21](/albums/img/6/7/6/319676-10105-37-720.jpg)
Fuselage is together - the Pavla resin cockpit fit great with no sanding required.
![Album image #22 Album image #22](/albums/img/6/7/7/319677-10105-12-720.jpg)
And the wings are on - she's starting to look like a Canberra!
![Album image #23 Album image #23](/albums/img/6/7/8/319678-10105-30-720.jpg)
A little weight is necessary to keep her on her wheels. About 45 grams total, including the resin cockpit.
![Album image #24 Album image #24](/albums/img/6/7/9/319679-10105-14-720.jpg)
Out of the box, the SBS rudder didn't fit so well.
![Album image #25 Album image #25](/albums/img/6/8/0/319680-10105-19-720.jpg)
That's better! Just a little bit of sanding, easy adjustment.
![Album image #26 Album image #26](/albums/img/6/8/1/319681-10105-97-720.jpg)
Adding details that Airfix forgot - the crash strips and rain channels.
![Album image #27 Album image #27](/albums/img/6/8/2/319682-10105-45-720.jpg)
Another view.
![Album image #28 Album image #28](/albums/img/6/8/3/319683-10105-41-720.jpg)
Two crash strips up front as well.
![Album image #29 Album image #29](/albums/img/6/8/4/319684-10105-76-720.jpg)
Airfix completely goofed up the strengthening plates, so I made my own.
![Album image #30 Album image #30](/albums/img/6/8/5/319685-10105-95-720.jpg)
Here is where they'll go. The plates are made from 0.005" thick styrene.
![Album image #31 Album image #31](/albums/img/7/5/8/326758-10105-66-720.jpg)
And in place on the port side.
![Album image #32 Album image #32](/albums/img/7/6/0/326760-10105-60-720.jpg)
Working on those panel lines!
![Album image #33 Album image #33](/albums/img/7/6/1/326761-10105-26-720.jpg)
My cheap template to set the 10 degree dihedral on the tailplanes, compensated for the taper in both the vertical fin and the tailplane.
![Album image #34 Album image #34](/albums/img/7/6/2/326762-10105-88-720.jpg)
Working on the tailplane roots.
![Album image #35 Album image #35](/albums/img/7/6/3/326763-10105-74-720.jpg)
Starting to take shape.
![Album image #36 Album image #36](/albums/img/7/6/4/326764-10105-12-720.jpg)
Adding detail on the forward bomb bay fuel tank with Tamiya tape, sealed with Future.
![Album image #37 Album image #37](/albums/img/7/6/5/326765-10105-92-720.jpg)
The kit lights were too thin for the wing, so need to make my own. Here is what we start with.
![Album image #38 Album image #38](/albums/img/7/6/6/326766-10105-67-720.jpg)
Finally happy with those tailplane roots.
![Album image #39 Album image #39](/albums/img/7/6/7/326767-10105-48-720.jpg)
And the finished light after shaping and polishing.
![Album image #40 Album image #40](/albums/img/7/6/8/326768-10105-84-720.jpg)
Adding the wingtip RWR (Radar Warning Receivers) - XH134 had these modifications.
![Album image #41 Album image #41](/albums/img/7/6/9/326769-10105-51-720.jpg)
Start with two strips of 0.010" styrene.
![Album image #42 Album image #42](/albums/img/7/7/0/326770-10105-82-720.jpg)
Sand to proper shape for the rear camera bay strakes.
![Album image #43 Album image #43](/albums/img/7/7/1/326771-10105-27-720.jpg)
A few "small" sinkholes in the main gear doors!
![Album image #44 Album image #44](/albums/img/7/7/2/326772-10105-88-720.jpg)
Test-fitting the wheels. The gear legs are too long and the aircraft sits nose down more than it should.
![Album image #45 Album image #45](/albums/img/7/7/3/326773-10105-62-720.jpg)
Add the "lip" around the front of the round aperture.
![Album image #46 Album image #46](/albums/img/7/7/4/326774-10105-90-720.jpg)
Shortened and pinned the main gear legs - much better. Nose gear needs to be a tad shorter.
![Album image #47 Album image #47](/albums/img/7/7/5/326775-10105-82-720.jpg)
Notice where the tyres are in relation to the bottom of the fuselage.
![Album image #48 Album image #48](/albums/img/0/4/1/332041-10105-81-720.jpg)
Modifying the antenna to correct shape.
![Album image #49 Album image #49](/albums/img/0/4/2/332042-10105-47-720.jpg)
Engine faces painted up.
![Album image #50 Album image #50](/albums/img/0/4/3/332043-10105-51-720.jpg)
Hemp-ified! The British standard no longer calls this colour Hemp; it's now Camouflage Beige. I did some post shading.
![Album image #51 Album image #51](/albums/img/0/4/4/332044-10105-97-720.jpg)
Tail is Medium Sea Grey for the retirement scheme.
![Album image #52 Album image #52](/albums/img/0/4/5/332045-10105-88-720.jpg)
Underside is Light Aircraft Grey, again with some post shading.
![Album image #53 Album image #53](/albums/img/0/4/6/332046-10105-17-720.jpg)
Masking was a pain, but I think it came out OK.
![Album image #54 Album image #54](/albums/img/0/4/7/332047-10105-47-720.jpg)
A light wash on the gear and flap wells.
![Album image #55 Album image #55](/albums/img/0/4/8/332048-10105-65-720.jpg)
The top of the wing spar was sprayed with Alclad Dark Aluminum, followed by a coat of Future and the start of the Stickers!
![Album image #56 Album image #56](/albums/img/0/4/9/332049-10105-86-720.jpg)
The wing spar was left unpainted to allow NDT (non-destructive testing) to be done easily.
![Album image #57 Album image #57](/albums/img/5/8/4/335584-10105-22-720.jpg)
Stencils going on - from the Model Alliance Canberra stencil sheet.
![Album image #58 Album image #58](/albums/img/5/8/5/335585-10105-58-720.jpg)
Lots of stencils! But they really add to the model.
![Album image #59 Album image #59](/albums/img/5/8/6/335586-10105-17-720.jpg)
A light wash on the landing gear and flap bays.
![Album image #60 Album image #60](/albums/img/5/8/7/335587-10105-22-720.jpg)
I added a copy of Zoo Magazine for the pilot's reading pleasure - this was seen at an airshow in the UK.
![Album image #61 Album image #61](/albums/img/5/8/8/335588-10105-59-720.jpg)
Wheels on - I had to adjust the length of the gear legs to get the proper stance.
![Album image #62 Album image #62](/albums/img/5/8/9/335589-10105-48-720.jpg)
Canberras are usually quite level - using the kit legs as moulded would result in a very tail high bird.
![Album image #63 Album image #63](/albums/img/5/9/0/335590-10105-12-720.jpg)
A coat of Alclad Clear Flat and she looks like almost ready for action!
![Album image #64 Album image #64](/albums/img/5/9/1/335591-10105-29-720.jpg)
Flaps added in the normal position that you see when parked.
![Album image #65 Album image #65](/albums/img/5/9/3/335593-10105-63-720.jpg)
The navigator has a fold-out desk to help with charts - or maybe an extra copy of Zoo magazine.
![Album image #66 Album image #66](/albums/img/5/9/5/335595-10105-53-720.jpg)
So I added the desk to the nose assembly.
![Album image #67 Album image #67](/albums/img/5/9/6/335596-10105-51-720.jpg)
Fuel dump and lower aft fuselage antennae in place.
![Album image #68 Album image #68](/albums/img/5/9/7/335597-10105-77-720.jpg)
Using scrap styrene to make the wingtip formation lights.
![Album image #69 Album image #69](/albums/img/5/9/8/335598-10105-99-720.jpg)
Slice off the very tip, and add to the wingtip.
![Album image #70 Album image #70](/albums/img/5/9/9/335599-10105-47-720.jpg)
Nose mounted - Pavla include the actuator strut. Nice touch.
![Album image #71 Album image #71](/albums/img/6/0/0/335600-10105-77-720.jpg)
ILS sensors added to vertical tail. Kit parts were way overscale, so I borrowed these from the spares box.
![Album image #72 Album image #72](/albums/img/6/0/1/335601-10105-57-720.jpg)
Aerial wire is added, and I'm calling this one done. More pictures to follow soon!
![Album image #73 Album image #73](/albums/img/8/5/9/335859-10105-92-720.jpg)
![Album image #74 Album image #74](/albums/img/8/6/0/335860-10105-32-720.jpg)
![Album image #75 Album image #75](/albums/img/8/6/1/335861-10105-63-720.jpg)
![Album image #76 Album image #76](/albums/img/8/6/2/335862-10105-70-720.jpg)
![Album image #77 Album image #77](/albums/img/8/6/3/335863-10105-76-720.jpg)
![Album image #78 Album image #78](/albums/img/8/6/4/335864-10105-31-720.jpg)
![Album image #79 Album image #79](/albums/img/8/6/5/335865-10105-46-720.jpg)
![Album image #80 Album image #80](/albums/img/8/6/6/335866-10105-11-720.jpg)
![Album image #81 Album image #81](/albums/img/8/6/7/335867-10105-88-720.jpg)
![Album image #82 Album image #82](/albums/img/8/6/8/335868-10105-87-720.jpg)
![Album image #83 Album image #83](/albums/img/8/6/9/335869-10105-30-720.jpg)
![Album image #84 Album image #84](/albums/img/8/7/0/335870-10105-30-720.jpg)
![Album image #85 Album image #85](/albums/img/8/7/1/335871-10105-74-720.jpg)
![Album image #86 Album image #86](/albums/img/8/7/2/335872-10105-93-720.jpg)
![Album image #87 Album image #87](/albums/img/8/7/3/335873-10105-13-720.jpg)
![Album image #88 Album image #88](/albums/img/8/7/4/335874-10105-54-720.jpg)
![Album image #89 Album image #89](/albums/img/8/7/5/335875-10105-31-720.jpg)
![Album image #90 Album image #90](/albums/img/8/7/6/335876-10105-16-720.jpg)
![Album image #91 Album image #91](/albums/img/8/7/7/335877-10105-20-720.jpg)
![Album image #92 Album image #92](/albums/img/8/7/8/335878-10105-37-720.jpg)
![Album image #93 Album image #93](/albums/img/8/7/9/335879-10105-63-720.jpg)
![Album image #94 Album image #94](/albums/img/8/8/0/335880-10105-58-720.jpg)
![Album image #95 Album image #95](/albums/img/8/8/1/335881-10105-59-720.jpg)
Kommentit
37 13 February 2017, 20:53
![](/profiles/img/10105-s.jpg)
Thanks guys! It will be a bit of work - Airfix made some really goofy errors. Hard to explain, especially since their old, raised panel line Canberras are pretty good. We'll tart her up though!
13 February 2017, 21:19
![](/profiles/img/25343-593-s.png)
The cockpit and navigator's stations look like you've ripped them from an actual Canberra. By that I mean to say it looks really good. Shame the kit itself won't help you along though.
16 February 2017, 16:02
![](/profiles/img/27244-664-s.jpg)
Love my Canberra's just finishing nearly.... my 1/48 Airfix B.2/B.20, overall not a bad kit - its not Tamiya-tight but not bad. But I really like the look of the PR9/B.57
17 February 2017, 03:59
![](/profiles/img/10105-s.jpg)
The fuselage is together and I'm now in the process of adding a lot of details that Airfix either forgot, or got wrong. I know this is one of Hornby's earlier efforts, but they could have at least looked at an old Airfix Canberra for guidance - they wouldn't have done some of these silly things! But she's coming along. I uploaded several new photos. Cheers, Bill
20 February 2017, 00:33
![](/profiles/img/10105-s.jpg)
More progress, have a look at the new photos. She's very close to getting her first coat of Hemp! Cheers, Bill
8 March 2017, 00:42
![](/profiles/img/23938-707-s.jpg)
Great progress Bill, and masterful narration! I had a similar "tail too high" problem in my recent build - I mean, by a LOT! Just amazes me that considering the complexity of model design, they can't get the legs' length correct... Good luck painting, and thanks for sharing 👍
8 March 2017, 02:54
![](/profiles/img/14213-529-s.jpg)
Very beautiful progress Bill. Did not know the Airfix Canberra was that flawed.
8 March 2017, 06:19
![](/profiles/img/10105-s.jpg)
Thanks, mates!
Gary - the red filler is Nitro-Stan Red Spot & Glazing Putty, an automotive product. I like it because it sands to a beautiful feather edge and is very smooth. The downside is that it shrinks a bit, and two applications are usually necessary.
Erik - the "old tool" Airfix Canberra was in some ways better than the new one. The new tool was one of the first under Hornby, and it has quite a few problems. None of them make it "unbuildable" and most are easily fixed. It fits really well, which can't be said for the Xtrakit. I think it will end up looking very good.
8 March 2017, 16:28
![](/profiles/img/10548-484-s.jpg)
Thanks for the info Bill. I've used a similar product several times as well. 👍
8 March 2017, 16:32
![](/profiles/img/13641-502-s.jpg)
Watching and missing those kits, they disappeared so quickly from the shops...
8 March 2017, 20:39
![](/profiles/img/10105-s.jpg)
The Cranberry has been painted, and I've started on the stickers! I ran into a bit of a problem here, though - the yellow stencils from the Airfix kit don't show up against the Hemp paint. They literally disappear. So I tried the stencils from the Xtrakit PR.9, and they disintegrated in the water. Just when I thought we were close to finishing this baby. Anyway, a friend in the UK is sending me an out-of-print Model Alliance sheet of PR.9 stencils. That should do the trick. In the meantime, I've uploaded some more photos that show the current progress. Cheers, Bill
24 March 2017, 17:55
![](/profiles/img/13641-502-s.jpg)
Lucky you - because of the decal friend 🙂 Could you give some more details regarding the faults of that kit? Would be very useful for the others I guess 🙂
24 March 2017, 20:31
![](/profiles/img/10105-s.jpg)
I think the major faults of the kit are the filet radius at the bottom of the leading edge of the vertical tail is wrong and needs to be reshaped (easy), the horizontal tailplane roots have no dihedral and need to be removed from the fuselage and the tailplanes lengthened inboard to compensate (not so easy), many of the panel lines (especially on the fuselage) are too heavy, wrong or missing (especially the strengthening plates), the cockpit as supplied by Airfix is that for the B(I).8 version, the landing gear struts are too long, many details are missing from the belly (like the crash strips and fuel tank attachment straps), the RWR antennae on the wingtips are missing, the forward RWR bullet on the tail is too big, the intake exhaust vent on the starboard nacelle is on the wrong side, air conditioner exhausts are missing from the underside, vortext generators on the vertical tail are in the wrong place, vortex generators on the underside of the wingtips are missing...what else? That's enough for now! On the bright side, the fit is quite good! 🙂
24 March 2017, 21:41
![](/profiles/img/10105-s.jpg)
@Clifford Keesler, thanks for asking. I'm feeling OK. My chemotherapy continues through July of this year. I'm in the maintenance phase now, since I'm in remission again. It's been over two years since the recurrence of the lymphoma and the start of treatment again. Long journey, but we keep plugging away at it - gotta kill every one of those bloody cancer cells!
24 March 2017, 21:50
![](/profiles/img/13641-502-s.jpg)
Thanks for your exhaustive info Bill, that's very helpful. Fingers crossed for both of your fights! (Cranberry & chemiotherapy)
26 March 2017, 18:48
![](/profiles/img/user-s.jpg)
we wish you good luck and the best in the fight with the tiny cells and hope you can overcome....
Keep on fighting Bill
27 March 2017, 10:17
![](/profiles/img/11491-s.jpg)
Great Work Bill, excellent!!! Hope you get those little bastards out of you soon, completely. Nice to see U again "in action" 😄
27 March 2017, 10:57
![](/profiles/img/10105-s.jpg)
The Cranberry PR.9 is finished! I've added a few of the last assembly photos, plus one picture of the finished model. More pictures will be posted soon. Cheers, Bill.
6 April 2017, 20:57
![](/profiles/img/10105-s.jpg)
Thanks, mates! I'm setting up the photo shoot now, so more pictures of the finished model will be here soon! 🙂
7 April 2017, 18:32
![](/profiles/img/10105-s.jpg)
Thanks, mates! The rest of the photos are now on-line. Enjoy! Cheers, Bill
7 April 2017, 23:19
![](/profiles/img/11067-733-s.jpg)
Wonderful work Uncle. IMHO this aircraft looks beautiful in any paint scheme, camo, black, raspberry ripple, NMF, target tug, ... even the bright orange Luftwaffe version, but this is one of the most elegant!
9 April 2017, 08:33
![](/profiles/img/10105-s.jpg)
Thanks mates! Since these photos were posted I fixed the slight "nose-down" attitude that the model shows. I've learned that the main gear legs in the Airfix kit are too long. I took them off (a rather delicate operation I might add) and shortened them a bit and now she looks much better. I wish I had known that while I was building the kit, as it would have made it a lot easier! Cheers, Bill
1 August 2021, 18:20
![](/profiles/img/15629-913-s.jpg)
Well done Bill !!
an excellent job, all the extra effort paid off splendidly ! 🙂
1 August 2021, 20:50
![](/profiles/img/10105-s.jpg)
Thanks everyone! I was surprised that the new tool Airfix Canberra needed so much work, but it came out nice and looks great in my display case. Cheers, Bill
2 August 2021, 18:00
![](/profiles/img/38460-541-s.jpg)
Hi Bill well deserved, and yes many of the new toolings by Airfix needs a lot of attention and seems to be released in a kind of rush resp. in a hurry!
Their new Blenheims and Me 262 does have some really fit issues as well!
So you can be proud twice with this result!
2 August 2021, 18:03
![](/profiles/img/27826-126-s.jpg)
Wow... very good job and a fantastic result.
I especially like pic 73.
Congrats!
2 August 2021, 18:13
![](/profiles/img/10105-s.jpg)
If you like head-on shots, take a look at my F-8 Crusader album picture 59. Cheers, Bill
2 August 2021, 18:18
![](/profiles/img/10105-s.jpg)
Thanks mates. I love it when these old threads get revived. I should take some new photos now that I've fixed the length of the main gear struts though. The sit of the model is now much better. Not sure how Airfix got that wrong, especially when they got it right on their old tool Canberra. Cheers, Bill
10 April 2022, 14:50
![](/profiles/img/user-s.jpg)
Nice that this one shows up again and brings it to my attention. Like it a lot.
10 April 2022, 17:16
![](/profiles/img/10105-s.jpg)
@WhiteGlint - yeah, I really like those head-on shots, especially with flaps down, etc. Cheers Bill
11 April 2022, 14:09
Album info
With the help of some aftermarket, and (maybe) a bit or two of the Xtrakit offering, perhaps we can get a realistic replica of the last recce variant of the Cranberry. But then, maybe not. The Airfix kit will be a challenge, as Hornby managed to make a lot of mistakes.