Mark I Male C19 (WIP)
Fixing the final assembly on the sponsons
Primer on
Laying some paint
Rear hydraulic ram tubes added
Drawing the lines
Experiments with AK "Worn Effects"
Tracks on - removed one link per side, they are now 89 links long, instead of the correct 90
AMMO Filter and AK Gauzy varnish applied
Decals on, sealed with an additional layer of AK Gauzy
First paint on the figures
Working on the faces, using AK "Flesh and Skin colors" set
Figures faces still requiring some work...
Working on the eyes...
Light Rust Wash applied to tracks
Preparing the tarps with putty
Progress with the figures and smaller bits
Rust wash applied to the tracks
Preparing the base
Bits and pieces
WWI cans
Painting glass bottles
Pin wash
Applied AK Dark Earth... it's really dark
Applying some oils (light colors) on top of the finished pattern
Wood almost finished
Adding straps to the rifles
Figures finished
Testing the layout
Building the headlights - no clear parts included in the kit
Starting mud with Dark Earth Pigments from AK
Integration with the base
Starting to add the smaller acessories
Kommentit
2 19 March 2017, 23:53
Taarna Eckart
Oh yes, I want to see where this is going. 🙂 How well does it fit together?
Oh yes, I want to see where this is going. 🙂 How well does it fit together?
27 April 2017, 23:52
Ricardo Reis
I'll do the Solomon camouflage. Regarding fit, it's very good. Only had problem with the sponsons, because a lot of parts fit together at the same time and there are no guides. As I only glued the roof later, it did not fit so well... still have to fix that.
I'll do the Solomon camouflage. Regarding fit, it's very good. Only had problem with the sponsons, because a lot of parts fit together at the same time and there are no guides. As I only glued the roof later, it did not fit so well... still have to fix that.
28 April 2017, 08:49
Rui S
Sim, bela camuflagem.
Mal posso esperar pelo envelhecimento e uso. A julgar pelo atrelado vai ficar um mimo.
Sim, bela camuflagem.
Mal posso esperar pelo envelhecimento e uso. A julgar pelo atrelado vai ficar um mimo.
19 July 2017, 17:29
Ricardo Reis
Thanks. I'll use less chipping in the remaining hull, because these machines did not have much time to chip. My weathering will be more based on pin wash, oils, streaking and (lastely) mud.
Thanks. I'll use less chipping in the remaining hull, because these machines did not have much time to chip. My weathering will be more based on pin wash, oils, streaking and (lastely) mud.
19 July 2017, 20:59