mittakaavan mallintamistietokanta | stash manager
Mahoo76
Martin Oostrom (Mahoo76)
NL

WIP Revell Polikarpov I-153 Chaika

Kommentit

7 April 2017, 06:52
Martin Oostrom
It's official: I'm a fraud. I'm going to (shamelessly) copy the ideas of a more creative modeller.
Take a bow mr. Polikarpov I-153 Chaika ( Revell) | Album by Flop_Se (1:72)
10 April 2017, 19:21
Stanley Carrier
imitation is the most sincere form of flattery.
18 April 2017, 15:57
Martin Oostrom
Painted the bottom of the fuselage & some parts.
20 April 2017, 14:40
Martin Oostrom
Thanks Stanley, I'll keep that in mind.

For the first time ever I painted camo with an airbrush. Decided to do it the hard way; freehand. I'm quite satisfied with the result.
21 April 2017, 10:39
Erik Leijdens
Yes, looks good Martin, maybe a bit too soft demarcations but it looks ok to me 👍
21 April 2017, 11:33
Alec K
Nice freehand Martin. You are brave to do that! What airbrush did you use?
21 April 2017, 12:28
Łukasz Gliński
Nice camo, watching
21 April 2017, 13:26
Martin Oostrom
Thanks Erik, Alec & Łukasz.
The demarcations are soft. I didn't/wouldn't take the time to mask. The plane itself is quite small and I wanted to give freehand a go. In reality there is some tiny splattering of the darker colour on the light colour.

I'm using a Harder & Steenbeck Evolution with the whole shabang. It comes with a 0.2 & 0.4 needleset. I also bought the pressure control valve and the needle limiter. I can recommend both.

The camo was done with the 0.2 needleset.
21 April 2017, 17:21
Martin Oostrom
I found cleaning of my airbrush very tedious. It actually made me long for a hairy stick. Eventually I found some good tips on this site:
cs.finescale.com/fsm..s/f/18/t/155694.aspx
21 April 2017, 17:24
Christian Bruer
Nice little kit and nice work so far 👍
21 April 2017, 18:43
Martin Oostrom
Thanks Christian. It's little indeed. I tried rigging it, succeeded in the end. Was finnicky job. Now I'll let the glue set for at least a night, cutting of the extra wire will be done later. All that's left is the under carriage, decalling, panel line wash and perhaps some weathering. I'll have a peak at Flop's progress for ideas. 🙂
21 April 2017, 19:19
Stephan Ryll
Look's good so far, nice work!
21 April 2017, 20:38
Alec K
Nice. I have just ordered the Harder & Steenbeck Infinity, so can't wait to try it (have Iwata Eclipse and CM-C Plus now). Yes, airbrush cleaning is a pain, but it does eventually become routine and not so bad 🙂
21 April 2017, 21:01
Flop_Se
Hey Martin! really nice so far! 👍 you also has overtaken my project!????
22 April 2017, 13:03
Martin Oostrom
Gutentag Herr Flop. I just took a look at your build. Our progress is quite similar. Yours is more sophisticated though. I like the extra effort you took with the exhausts and the brake lines.
22 April 2017, 21:12
berni
Good Start up here 👍
23 April 2017, 09:06
Martin Oostrom
Thank you Berni.
23 April 2017, 09:34
Thomas Bischoff
nice build - looking at the free hand camo I would say that the paint (dark green) would have required more thinning?
23 April 2017, 12:43
Martin Oostrom
Thanks Thomas. The light paint was too thick and gave me some problems. Had to clean the brush to het it going again. The dark paint splattered a bit. I'm too novice to determine whether it's pressure, distance or thinning. Have you got some clues for me?
23 April 2017, 15:39
Thomas Bischoff
the splatters would indicate that the paint was not enough diluted.
Pressure is a very personal thing - each paint can be different, depends also on the thinning. Just try different settings on a testbed before applying to the "real" thing
23 April 2017, 15:51
Martin Oostrom
My wife kills my models while cleaning my room faster than I can build them. So I bought some Trumpeter display cases. The ugly black plastic base made my eyes hurt. So I decided to do a diorama. Started out simple with a concrete pad with some grass alongside. A small shallow puddle should bring some variation to the scene.
As usual, feel free to enlighten me were I went wrong, overdid some stuff or stopped too early 😉
15 June 2017, 19:39
Flop_Se
nice progress! 🙂 looks like a nice base! 👍
16 June 2017, 06:21
Thomas Bischoff
nice start on the base - every model looks nicer with a decent display!
16 June 2017, 18:15
Martin Oostrom
Added the water, at least tried it. Hopefully tomorrow I can clean the base up a bit along the edges. I'm very curious about the result. 🙂
16 June 2017, 19:57
Martin Oostrom
Not exactly what I was looking for. This isn't a puddle, this is light mud. Aaah decisions. Wlli I attempt a salvage operation or just declare this ok?

Flop, Thomas & James, thank you for your encouragement.
17 June 2017, 07:10
Thomas Bischoff
I don't want to bring you down but it does not look very convincing - I vote for a salvage operation!
17 June 2017, 15:07
Martin Oostrom
Aaah, the truth hurts Thomas, well sort of.
I agree with you.
17 June 2017, 17:52
Martin Oostrom
Thanks Lode. Thomas, first attempt is a total failure.
18 June 2017, 09:09
Christian Bruer
Hi Martin,
I don't know the Vallejo Water Medium, but I guess it is not clear because you add a drop of colour to the medium?!

From my point of view you should paint just the background and not the water medium. This only should give clarity and a depth effect to the painted surface. The more layers of medium you apply the more depth effect you will get.

May you should try to paint the surface again with the preferred colours, let it dry and then add one or two final layers of water medium using a flat brush in a stippling motion. Make sure the first layer is dry before you add a second layer. The thicker each layer the more drying time.

By the way, I always use Schmicke acrylic high gloss gel no. 53005, to add effects to my ship model displays. I never dilute it with water, it is possible but not necessary!
schmincke.de/en/prod..llege-gloss-gel.html

Hope that helps and keep on the good work 👍
Cheers, Christian
18 June 2017, 10:17
Martin Oostrom
Hi Christian,
Thabks for the advice. I did paint the underground. I added 1 drop of paint to my water, just go get it murky. The stippling is what I dont like. A puddle should have a smooth surface. Mine looks like light mud. I'll try once more to get it smoothened, otherwise I'll paint it a darker shade of brown and declare it mud 🙂
There are plenty of tutorials on the web to create waves, wakes and the like. It seems I'm just using the wrong product for my puddle. Resin looks like the way to go, or vallejo still water. But I dont have those 😎
18 June 2017, 11:12
Martin Oostrom
Apply the Vallejo water. Then smoothen wit a moist/wet flat brush. The result would be passable if not for the older tinted 'water'.
So now its too smooth for mud and too rough underneath for a nice puddle.
I'll park the Chaika over it (sort of) and declare it finished and unsalvageble.
18 June 2017, 18:56
Thomas Bischoff
some battles can not be won - nice display anyway!
20 June 2017, 19:16

Project info

53 kuvien
1:72
valmistunut
1:72 Polikarpov I-153 Chaika (Revell 03963)
Polikarpov I-153 Chaika
SU Военно-воздушные силы СССР (Soviet Air Forces 1918-1992)
71 IAP, Baltic Fleet Air Force White 24 (Capt. K. V. Soloviyev)
1942 - Lavansaari
FS14257 FS27038 FS25466
 

Kaikki albumit

Näytä kaikki albumit »