Penske PC21 WIP Pictures
1
April 20, 2021The first thing to do is to assemble the Lola to get an overview of what needs to be adjusted ... and that's a lot. But don't complain, start!2
April 20, 20213
April 20, 20214
April 20, 20215
April 20, 20216
April 20, 20217
April 20, 20218
April 20, 20219
April 20, 202110
April 20, 202111
April 20, 202112
April 20, 202113
April 20, 202114
April 20, 202115
April 20, 202116
April 20, 2021The first point and certainly the simplest are Lola's front wheels, these are not Penske's. So new ones are made using 3D printing. At first it was easier than I thought, but after collecting more and more reference images I still had to adjust a few things17
April 20, 202118
April 20, 202119
April 20, 202120
April 20, 2021First test - fit very well and 1: 1 interchangeable with the kit part.21
April 20, 202122
April 20, 2021And when I was actually finished I noticed that the rims not only had spokes on the day of the test, but a filled space. So adjust that again.23
April 20, 202124
April 20, 2021And so that everything is ready on the front wheels - Air Valves...25
April 20, 202126
May 3, 2021Adapted front wing as a 1:1 replacement part for the Lola. There will be an adjustment on the front part of the bottom of the nose. And the additional wing elements in the direction of the front suspension are still missing. Update will follow shortly...27
May 3, 202128
May 3, 202129
May 3, 202130
May 3, 202131
May 3, 202132
May 3, 202133
May 3, 2021New 3d-printed elements for the front suspension.34
May 3, 202135
May 3, 202136
May 3, 202137
May 3, 2021It also needed a new front suspension. At first I thought it was almost impossible to adapt it to the Penke, but after a few measurements and a little try-on, I decided to only re-model one element. 3 openings had to be moved and a part of the kit was simply rotated and it basically fits after the first try.38
May 3, 202139
May 3, 202140
May 3, 202141
May 3, 202142
May 3, 2021
Kommentit
2 20 April 2021, 23:16