Mitsubishi G4M1 "Rikko" Betty Kanyoa Air Goup Malaya Dec 1941
Kommentit
92 13 May 2021, 15:33
Treehugger
Would you you consider using a vacuum shaped canopy for this build?
I've started to browse vacuum canopy parts separately, then to track back to kits that the vac forms would fit. Though in my experience some vac canopies aren't that great (not blemish free glass). One canopy piece was even dented when I got it in my mail. 🙁
Would you you consider using a vacuum shaped canopy for this build?
I've started to browse vacuum canopy parts separately, then to track back to kits that the vac forms would fit. Though in my experience some vac canopies aren't that great (not blemish free glass). One canopy piece was even dented when I got it in my mail. 🙁
14 May 2021, 11:45
Sebastian Meyner
Daniel....is that really you? What are u doing outside of 72nd scale?! 😛
Following! 👍
Daniel....is that really you? What are u doing outside of 72nd scale?! 😛
Following! 👍
14 May 2021, 16:18
Daniel Klink
Welcome Mates, glad to have you all here 👍
So we started with the interior assembling and filling some ejector marks.
But Tamiya especially in 48 is really amazing crisp and clean stuff wow!!
Welcome Mates, glad to have you all here 👍
So we started with the interior assembling and filling some ejector marks.
But Tamiya especially in 48 is really amazing crisp and clean stuff wow!!
23 May 2021, 20:52
Andrea Morris
Here's my attempt in case you're interested. Admiral Yamamoto's Transport | Album by Manic Dragon (1:48)
Here's my attempt in case you're interested. Admiral Yamamoto's Transport | Album by Manic Dragon (1:48)
23 May 2021, 21:28
Daniel Klink
Thank you Guillaume, much appreciated mate👍
Despite of lacking of interior and aftermarket upgrades this is real cool kit and fun 👍
Thank you Guillaume, much appreciated mate👍
Despite of lacking of interior and aftermarket upgrades this is real cool kit and fun 👍
26 May 2021, 22:43
Erik Leijdens
Looks mighty fine already Daniel! Never knew Tamiya released a Betty in the past, I must be living under a stone I guess 🙂
Looks mighty fine already Daniel! Never knew Tamiya released a Betty in the past, I must be living under a stone I guess 🙂
28 May 2021, 08:12
Daniel Klink
Thank you Clifford, erika and Alex much appriciated mates👍
@Erik, just for 25 years enough time left to get and build one left 🙂
Thank you Clifford, erika and Alex much appriciated mates👍
@Erik, just for 25 years enough time left to get and build one left 🙂
28 May 2021, 09:20
Daniel Klink
Thank you David, yes most manufacturers ignore the Crews!
Whoa that really is a big Cigar....
Thank you David, yes most manufacturers ignore the Crews!
Whoa that really is a big Cigar....
28 May 2021, 16:59
James C
Nice progress Daniel. The crew looks great and the addition of maps and other smaller details to the navigator and radio positions are a nice touch. Looks to be coming together nicely. 👍
Nice progress Daniel. The crew looks great and the addition of maps and other smaller details to the navigator and radio positions are a nice touch. Looks to be coming together nicely. 👍
28 May 2021, 18:37
Daniel Klink
Yes, despite of lack o interior detail and the rather bad done weapons it is great.
Yes, despite of lack o interior detail and the rather bad done weapons it is great.
30 May 2021, 21:36
Clifford Keesler
Probally can find after market weapons for it. I will check it out and see if I can find one in stock somewhere.
Probally can find after market weapons for it. I will check it out and see if I can find one in stock somewhere.
31 May 2021, 01:02
Clifford Keesler
No I have not. I always forget about Hannants. I will check them out. I checked my usual shops, and of course all not in stock. But I will keep looking.
No I have not. I always forget about Hannants. I will check them out. I checked my usual shops, and of course all not in stock. But I will keep looking.
2 June 2021, 22:12
Andrea Morris
Chuffed for you Cliff. Some folks don't know about Hannants, but if it's hard to find Hannants often have it. Only one left Spanjaard!!!
Chuffed for you Cliff. Some folks don't know about Hannants, but if it's hard to find Hannants often have it. Only one left Spanjaard!!!
3 June 2021, 01:10
Spanjaard
thanks Andrea, but I meant I was to late to offer one to buy 😉 for some reason i was seeing the post from Clifford about not finding one, but not the one where he got one.
i left the links just in case somebody else was looking for it
thanks Andrea, but I meant I was to late to offer one to buy 😉 for some reason i was seeing the post from Clifford about not finding one, but not the one where he got one.
i left the links just in case somebody else was looking for it
3 June 2021, 06:47
Daniel Klink
Congrats Clifford for your catch 👍
It is really big btw. just in case i forgot to mention it before! 🙂
Congrats Clifford for your catch 👍
It is really big btw. just in case i forgot to mention it before! 🙂
4 August 2021, 20:54
Daniel Klink
Big Plane.. Powerful tools!.Never needed this kind of powerful pressure before🙂
Big Plane.. Powerful tools!.Never needed this kind of powerful pressure before🙂
6 August 2021, 13:23
Spanjaard
simple ideas are usually great idea. I hope it does not leave marks in the plastic
simple ideas are usually great idea. I hope it does not leave marks in the plastic
6 August 2021, 13:40
David Januska
What happened Daniel, you've left the Braill scale😉. But result is the same perfect as in 1/72 👍.
What happened Daniel, you've left the Braill scale😉. But result is the same perfect as in 1/72 👍.
6 August 2021, 13:47
Daniel Klink
Hi spanjaard, yap everything went fine no marks or something and now it fits like a charme.
Just someminor sanding and filling needed.. 👍
@David Thank you mate..dont worry the 72 stays 1st choice. But there is no good G4M1 around
in 72 so i have to do this Monster!! 🙂
And gosh it is huge! nearly takes the whole A2 mat.
Hi spanjaard, yap everything went fine no marks or something and now it fits like a charme.
Just someminor sanding and filling needed.. 👍
@David Thank you mate..dont worry the 72 stays 1st choice. But there is no good G4M1 around
in 72 so i have to do this Monster!! 🙂
And gosh it is huge! nearly takes the whole A2 mat.
6 August 2021, 22:18
Daniel Klink
Thank you so much Rui, Spanjaard and Clifford for the positive feedback!.
So the masking is done Phew!!and the Airframe is almost completely fitted together!..
That masking stuff is really one of the challenging stuff with japanese Aircraft, esp. Bombers. 🙂
Thank you so much Rui, Spanjaard and Clifford for the positive feedback!.
So the masking is done Phew!!and the Airframe is almost completely fitted together!..
That masking stuff is really one of the challenging stuff with japanese Aircraft, esp. Bombers. 🙂
8 August 2021, 21:35
James C
Looking great Daniel, especially the extensive masking 👍 Any issues encountered with the assembly? I'm eyeing up mine at present
Looking great Daniel, especially the extensive masking 👍 Any issues encountered with the assembly? I'm eyeing up mine at present
8 August 2021, 22:22
Daniel Klink
Hi James, Thank you very much mate!
The only issue is the fuselage part behind the side canopys to the rudders.
There the fuselage is nearly empty inside and i had to cut away the locator pins to get both sides
Fitted perfectly.
Hi James, Thank you very much mate!
The only issue is the fuselage part behind the side canopys to the rudders.
There the fuselage is nearly empty inside and i had to cut away the locator pins to get both sides
Fitted perfectly.
8 August 2021, 22:29
John
Excellent work so far. I too have a Betty in my stash and look forward to getting her on the bench. Are you planning an overall green or two-tone paint scheme?
Excellent work so far. I too have a Betty in my stash and look forward to getting her on the bench. Are you planning an overall green or two-tone paint scheme?
9 August 2021, 00:14
Slavo Hazucha
Let´s take a seat for another of those beautiful birds doomed to fight a lost war... Always a pleasure to watch this channel 😉
Let´s take a seat for another of those beautiful birds doomed to fight a lost war... Always a pleasure to watch this channel 😉
9 August 2021, 08:30
Daniel Klink
@Jamesmy pleasure mate?
@john and Rui thank you very much and welcome mates?
I will do the two tone scheme as with the G3M john.
@slavo you are always welcome and you are right. The early successes were soon just wastepaper.
Glad you like them though👍
@Jamesmy pleasure mate?
@john and Rui thank you very much and welcome mates?
I will do the two tone scheme as with the G3M john.
@slavo you are always welcome and you are right. The early successes were soon just wastepaper.
Glad you like them though👍
9 August 2021, 11:27
Daniel Klink
Welcome Guy, much appreciated and glad you lik it so far 👍
Hi David, in fact the Fuslage is as big. In diameter ist is bigger btw.
Welcome Guy, much appreciated and glad you lik it so far 👍
Hi David, in fact the Fuslage is as big. In diameter ist is bigger btw.
9 August 2021, 20:30
JEAN-LUC LELODEY
Nice progress, the pilots are very successful. I did not know the trick of Cable tie, i will use it.
Wait to see more...
Nice progress, the pilots are very successful. I did not know the trick of Cable tie, i will use it.
Wait to see more...
10 August 2021, 16:28
Daniel Klink
Thank you guys very much appreciated?
The kit comes with crew! They are really well done!
Thank you guys very much appreciated?
The kit comes with crew! They are really well done!
11 August 2021, 17:00
Slavo Hazucha
Just noticed the Revell contacta glue applicator in the back - this ain't a small feat at all! 😮
Just noticed the Revell contacta glue applicator in the back - this ain't a small feat at all! 😮
11 August 2021, 19:22
Daniel Klink
@David Tamiya has a heart für us modellers 🙂
@Salvo, but it is the small one by Revell! But you are right not small at all!
Ok compared to a B-29 in this scale... It i sthe shape of the fuselage that let this one look so huge.
[img1]
@David Tamiya has a heart für us modellers 🙂
@Salvo, but it is the small one by Revell! But you are right not small at all!
Ok compared to a B-29 in this scale... It i sthe shape of the fuselage that let this one look so huge.
[img1]
12 August 2021, 19:36
Clifford Keesler
Finally got mine, plus have a few other Japanese aircraft, I fear my attempts will be a joke compared to your works, and prop planes used to be my favorites.
Finally got mine, plus have a few other Japanese aircraft, I fear my attempts will be a joke compared to your works, and prop planes used to be my favorites.
12 August 2021, 23:23
Daniel Klink
Very cool Clifford, and you make me Blush again?
Iam sure your results will be as brillant, as your jet projects?
Very cool Clifford, and you make me Blush again?
Iam sure your results will be as brillant, as your jet projects?
15 August 2021, 11:32
Daniel Klink
Hi, engines are in progress...
Though just a relief, they are made quiet good by tamiya!
Only added some copperwire as ignition cables.
Hi, engines are in progress...
Though just a relief, they are made quiet good by tamiya!
Only added some copperwire as ignition cables.
26 August 2021, 13:49
Rui
It looks just like the cucumber proposal pic you posted. Now I will never look at it the same again 🤪
It looks just like the cucumber proposal pic you posted. Now I will never look at it the same again 🤪
11 September 2021, 16:07
Daniel Klink
Thank you James..but i o not think i will do another aircraft of this size in 1/48🙂
Thank you James..but i o not think i will do another aircraft of this size in 1/48🙂
11 September 2021, 20:08
Simon Nagorsnik
Your newest project looks interesting, I am already looking forward to the results
you inspire me to start my japan af project ... soon 😅
Your newest project looks interesting, I am already looking forward to the results
you inspire me to start my japan af project ... soon 😅
12 September 2021, 18:04
Daniel Klink
Thank you David, Cliffors, Guillaume and Simon very much appreciated words mates ! 👍
@David yap right tomorrow i will go grocery shopping 🙂
@Simon Go for it They are still too rare seen those Hinomaru Birds.
Thank you David, Cliffors, Guillaume and Simon very much appreciated words mates ! 👍
@David yap right tomorrow i will go grocery shopping 🙂
@Simon Go for it They are still too rare seen those Hinomaru Birds.
12 September 2021, 20:06
Daniel Klink
BTW: I think i got used to those flexible Airbrush stencils. The effect is really not bad.
BTW: I think i got used to those flexible Airbrush stencils. The effect is really not bad.
12 September 2021, 20:07
Andrew Horton
Wow! Looks like you've got some great paint schemes going there.
Wow! Looks like you've got some great paint schemes going there.
13 September 2021, 09:47
Slavo Hazucha
Some serious blue cheese finish all over the airframe! 👍 😉
type 91 torp also looking quite fresh!
Some serious blue cheese finish all over the airframe! 👍 😉
type 91 torp also looking quite fresh!
13 September 2021, 14:09
Clifford Keesler
That paint job is looking very promising Daniel. I need to try those air brush stencils.
That paint job is looking very promising Daniel. I need to try those air brush stencils.
14 September 2021, 01:47
Daniel Klink
Thank you very much Adam, Flight Line, Slavo and Clifford for your nice and encouraging words 👍
@Clifford go and get one you will like it, i promise.
@Slavo yap some Gorgonzola appearance 🙂
Thank you very much Adam, Flight Line, Slavo and Clifford for your nice and encouraging words 👍
@Clifford go and get one you will like it, i promise.
@Slavo yap some Gorgonzola appearance 🙂
15 September 2021, 18:49
Daniel Klink
YOu have to spray in very thin layers!
But i like the effect already
YOu have to spray in very thin layers!
But i like the effect already
19 September 2021, 14:34
Daniel Klink
Thank you so much David, Sebastian, Christian, Rui, John and Clifford!
Makes me somewaht happy that you like my work 👍
@John i use, Ak interactive and Real colors for this build! With the specific thinner they are quite well to handle.
Only the underside is sprayed with Gunze Aquaeous.
Thank you so much David, Sebastian, Christian, Rui, John and Clifford!
Makes me somewaht happy that you like my work 👍
@John i use, Ak interactive and Real colors for this build! With the specific thinner they are quite well to handle.
Only the underside is sprayed with Gunze Aquaeous.
21 September 2021, 19:53
Simon Nagorsnik
your pre shading technique works really well,it´s a top result!
your pre shading technique works really well,it´s a top result!
21 September 2021, 20:41
Daniel Klink
Thank you Simon, and i am quite satisfied too with the progress so far!
Though the Ak interactive colors have to been sprayed quick and only work with their specific thinner. So you have to use the special real color thinner from Ak for their Real Color range🙂
Thank you Simon, and i am quite satisfied too with the progress so far!
Though the Ak interactive colors have to been sprayed quick and only work with their specific thinner. So you have to use the special real color thinner from Ak for their Real Color range🙂
22 September 2021, 10:58
Simon Nagorsnik
i´ve also some rc colors in stock, used them with tamiya´s "yellow cab" thinner
but i don´t like them so much because i always get a too matt surface and they darkened me too much
maybe I was doing something wrong but now i´m really happy with my vallejo´s 😁
i´ve also some rc colors in stock, used them with tamiya´s "yellow cab" thinner
but i don´t like them so much because i always get a too matt surface and they darkened me too much
maybe I was doing something wrong but now i´m really happy with my vallejo´s 😁
22 September 2021, 15:15
bughunter
It looks like you are working slowly on this bird and takes your time - this pays back massively! 👍
It looks like you are working slowly on this bird and takes your time - this pays back massively! 👍
22 September 2021, 17:15
John
Daniel - I am a big fan of the AK Real Colors and have had good luck with them. I usually mix them pretty thin, at least 50% with their thinner. I used them on my Corsair and Skyray and it turned out well. I also have many colors of the Vallejo Model Air line, but have mixed results with them - still have not figured out the right mixture yet.
Daniel - I am a big fan of the AK Real Colors and have had good luck with them. I usually mix them pretty thin, at least 50% with their thinner. I used them on my Corsair and Skyray and it turned out well. I also have many colors of the Vallejo Model Air line, but have mixed results with them - still have not figured out the right mixture yet.
23 September 2021, 01:07
Daniel Klink
Hi mates, thank you very much for your kind and warm
Words!
A pity that photos does not show the whole effect!
Only in the ligted areas!
@ john they are absolute ok but for such large areas it is quite demanding to keep it fluent evenly😉
Hi mates, thank you very much for your kind and warm
Words!
A pity that photos does not show the whole effect!
Only in the ligted areas!
@ john they are absolute ok but for such large areas it is quite demanding to keep it fluent evenly😉
23 September 2021, 15:57
Daniel Klink
Thank you very much Guy, much appreciated 👍
And i got the feeling that you got infected with the hinomaru AC's, when i follow your projects and Albums 👍
Thank you very much Guy, much appreciated 👍
And i got the feeling that you got infected with the hinomaru AC's, when i follow your projects and Albums 👍
23 September 2021, 20:21
Guy Rump
You're right Daniel, I am building up a collection of WW2 hinomaru ACs, the bug has got me! 🙂
You're right Daniel, I am building up a collection of WW2 hinomaru ACs, the bug has got me! 🙂
24 September 2021, 14:47
Robin (WhiteGlint)
👀
Paintjob is really nice. 👍
I think the result of your pre-shading is easier to see on this giant bird.
👀
Paintjob is really nice. 👍
I think the result of your pre-shading is easier to see on this giant bird.
24 September 2021, 15:49
Daniel Klink
Thank you James, Miro and white Glint... really appreciate those comments mates👍
@ guy yeah and your progress is visible with every build mate 👍
Thank you James, Miro and white Glint... really appreciate those comments mates👍
@ guy yeah and your progress is visible with every build mate 👍
24 September 2021, 22:34
Björn Svedberg
That is a great looking paint job! I like the layering technique you are using. Nice build log too. 👍
That is a great looking paint job! I like the layering technique you are using. Nice build log too. 👍
26 September 2021, 05:15
Slavo Hazucha
Great paintjob and shading on both color tones - I was grilling some of our home-grown zucchini today, and they were pretty much in this green paint range... which I guess is a good thing! 😄
Seriously cool job, agree with bughunter, could be on the top! 👍
Great paintjob and shading on both color tones - I was grilling some of our home-grown zucchini today, and they were pretty much in this green paint range... which I guess is a good thing! 😄
Seriously cool job, agree with bughunter, could be on the top! 👍
26 September 2021, 19:01
Daniel Klink
Really appreciate your positive feedback mates!
Thank you very much!👍👍👍
Really appreciate your positive feedback mates!
Thank you very much!👍👍👍
29 September 2021, 11:29
Sebastian Meyner
Looking better and better 👍 Did you use the kit's decals? If you did, they're hardly visible and lay down nicely ….you mastered Tamiya decals better than almost anyone else 🙂
Looking better and better 👍 Did you use the kit's decals? If you did, they're hardly visible and lay down nicely ….you mastered Tamiya decals better than almost anyone else 🙂
2 October 2021, 03:52
Jan Voorbij
Guy, the bug got us too... : modelbrouwers.nl/phpBB3/viewforum.php?f=284
Guy, the bug got us too... : modelbrouwers.nl/phpBB3/viewforum.php?f=284
2 October 2021, 09:05
Daniel Klink
Hi Mates,
thank you for your kind comments 👍
@Sebastian..thank you and yes i use the Kits decals for the unit numbers and the small stencil under the elevators.
The Hinomarus are sprayed becaus the decals in the kit crumbled apart.
@Jan very cool 👍
Hi Mates,
thank you for your kind comments 👍
@Sebastian..thank you and yes i use the Kits decals for the unit numbers and the small stencil under the elevators.
The Hinomarus are sprayed becaus the decals in the kit crumbled apart.
@Jan very cool 👍
3 October 2021, 13:12
Bernhard Schrock
Schick! Insbesondere die sehr aufwändige Verglasung finde ich klar und sauber gelungen.
Schick! Insbesondere die sehr aufwändige Verglasung finde ich klar und sauber gelungen.
3 October 2021, 16:15
Daniel Klink
Danke Dir Bernhard, freut mich sehr das Dir das Ergebnis gefällt 👍
Thank you Mark and now I call this one Finished !!!!
Danke Dir Bernhard, freut mich sehr das Dir das Ergebnis gefällt 👍
Thank you Mark and now I call this one Finished !!!!
3 October 2021, 19:57
Simon Nagorsnik
It's finished?!- awesome work mate!!
I'm warching for your next project🙂
It's finished?!- awesome work mate!!
I'm warching for your next project🙂
3 October 2021, 20:14
Daniel Klink
Thank you very much Mates for your support and nice comments and your endurance through this project..!
Your nice and constructive Feedback was very much appreciated thanks again 👍
Now the Kanoya goup is complete and ready to go for the Z-force 🙂
Thank you very much Mates for your support and nice comments and your endurance through this project..!
Your nice and constructive Feedback was very much appreciated thanks again 👍
Now the Kanoya goup is complete and ready to go for the Z-force 🙂
3 October 2021, 22:28
Hanno Kleinecke
Very realistic looking result, most skilled build and paintjob, Daniel 👍
Very realistic looking result, most skilled build and paintjob, Daniel 👍
4 October 2021, 07:44
Daniel Klink
Wow! That somewaht overwhelming! Thank you so much Mates...
Really appreciate your support and warm words.
My pleasure gentlemen 👍👍👍
Wow! That somewaht overwhelming! Thank you so much Mates...
Really appreciate your support and warm words.
My pleasure gentlemen 👍👍👍
4 October 2021, 20:40
bughunter
This is your best Daniel, since you avoided error made in haste! Wonderful 👍
This is your best Daniel, since you avoided error made in haste! Wonderful 👍
5 October 2021, 09:16
Erwin Leetink
That is great work you performed there.... I am happy that I was allow to take place in this ride 🙂
That is great work you performed there.... I am happy that I was allow to take place in this ride 🙂
6 October 2021, 06:54
Daniel Klink
Thank you so much Christoph, Frank, Roberto and Erwin👍
Your positive feedback is very much appreciated, and makes me blush😳
Thank you so much Christoph, Frank, Roberto and Erwin👍
Your positive feedback is very much appreciated, and makes me blush😳
15 October 2021, 21:27
Daniel Klink
Thank you Henry, very much appreciated and glad toread you again mate 👍
Thank you Henry, very much appreciated and glad toread you again mate 👍
16 October 2021, 21:41
akira kita
At that time, Japan was not advanced in mechanical technology. However, you have shown a lot of modelers in your wonderful work the process of effort that leads to the present.
At that time, Japan was not advanced in mechanical technology. However, you have shown a lot of modelers in your wonderful work the process of effort that leads to the present.
17 October 2021, 23:52
Daniel Klink
Hi Akira and thank you very much for your very nice and honoring words for my work mate 👍
Ive been always fascianted by the fast and consequent uprise and Transition by Japan and the mixture of tradition and Hi-tech til today.
Hi Akira and thank you very much for your very nice and honoring words for my work mate 👍
Ive been always fascianted by the fast and consequent uprise and Transition by Japan and the mixture of tradition and Hi-tech til today.
20 October 2021, 13:07
Daniel Klink
Donated the Betty a "small" base aka "Cookie" 🙂
Figures and a small vehicle is incoming!
Donated the Betty a "small" base aka "Cookie" 🙂
Figures and a small vehicle is incoming!
27 October 2021, 19:05
Album info
Hi like the GM3 this is also a bird of the Kanoya Air group that took part in the Campaign against the British Z-Force