Neuspinne
I got some inspiration when I heard there are spider excavators. This Neuspinne will be on a recon mission on Alps.
Back of the box
Checking the size and needed area. Parts are hold with blue tack.
Drilling holes for new axles. The kit could be built as it is, but there are 0.5mm steel rods in the kit in case open legs are preferred. I just also want that the joints are movable.
My attempt to organize and specify the legs.
First leg cut and sawn down.
0.5mm holes drilled into the parts.
Drilling is very challenging.
First leg completed.
My new saw is narrow enough for this.
Glued a strip of styrene on the main body to fix one detail.
Styrene cut and sanded off.
More legs coming up.
I printed the postures of the legs derived from my 3D-model made with SketchUp.
All joints locked with epoxy glue.
Main body constructed.
Right manipulator hand mostly constructed.
Left arm gun ready for painting or I should consider adding more details.
Head is constructed.
I wanted to add that little brass plate to highlight that hatch.
First Mr.Surfacer 1000 and then Vallejo's black primer.
The stand is coming up.
I decided that my diorama needs an alpine ibex so I got a goat in 1/72 scale. The bigger horns are made of green stuff.
I'm trying to make an improvised camo with brown and green triangles.
Such bad luck. I cleaned the parts and the first primer was mr.surfacer, but still one mask tape teared paint.
Two sheets of 6mm depron foam (used for rc planes) glued on the stand with PU-glue.
Neuspinne's parts are painted and few parts got clear varnish and decals.
I wanted to add that QR-code decal included in the kit, but it is quite big for this and a bit silly... It is a working code that reads "Neuspinne".
I had to test my carving abilities to see if I could make a believable mountain cliff. The ibex got primed and some brown.
I finally dared to start carving.
Mountain cliff mostly carved. Some stone/sand paste added after this.
Legs glued to the frame while positioned on the stand.
The stand is almost finished. My first time adding any loose grass and bushes.
I want to call ibex ready.
Weathering still ongoing.
The weathering is done and so is the matt varnish applied too. Just final assembly and the model is soon ready. Maybe tomorrow.
Neuspinne is now finished! Here a "mood picture".
There is nothing back of the stand.
Curved QR-code might be impossible to read...
With black background like my other Ma.K models.
too blurry image 🙁
The yellow stripe on the leg was added later for a reason...
Kommentit
34 30 January 2022, 19:11
Marius
I have no idea what this is, but your work is already fascinating. Watching. I am very curious.
I have no idea what this is, but your work is already fascinating. Watching. I am very curious.
30 January 2022, 19:28
Torsten
Very 😎 object, I have the one in 1:20 and will watch with great interest what you do with the little one
Very 😎 object, I have the one in 1:20 and will watch with great interest what you do with the little one
31 January 2022, 03:50
Robin (WhiteGlint)
Bad luck that the paint came off with the masking tape 🙁
Nice idea to add an animal 👍
I wonder how you'll compose the diorama.
Bad luck that the paint came off with the masking tape 🙁
Nice idea to add an animal 👍
I wonder how you'll compose the diorama.
8 February 2022, 20:25
S M
Thanks, JD and WhiteGlint. I have an idea for the diorama, but I haven't dared yet to cut the foam on the stand to make it look like a mountain cliff.
Thanks, JD and WhiteGlint. I have an idea for the diorama, but I haven't dared yet to cut the foam on the stand to make it look like a mountain cliff.
8 February 2022, 21:38
Torsten
Very sad with the peeling of the paint, I keep my fingers crossed that it will be good, the idea with the ibex and the base is an eye-catcher 👍
Very sad with the peeling of the paint, I keep my fingers crossed that it will be good, the idea with the ibex and the base is an eye-catcher 👍
11 February 2022, 14:38
S M
Neuspinne's parts are painted (mostly hopefully), but I can not proceed until I carve a mountain cliff on the stand.
Neuspinne's parts are painted (mostly hopefully), but I can not proceed until I carve a mountain cliff on the stand.
13 February 2022, 20:47
Simon Nagorsnik
Well done build so far!
Like the spider so much, a bit creepy in my opinion 😀
Well done build so far!
Like the spider so much, a bit creepy in my opinion 😀
21 February 2022, 18:41
Neil
Mate... Creepy indeed! 😱 I'm not a creepy crawly fan. But this is AWESOME! Goal suitably achieved imo 👍 lovely work.
Mate... Creepy indeed! 😱 I'm not a creepy crawly fan. But this is AWESOME! Goal suitably achieved imo 👍 lovely work.
21 February 2022, 19:41
JD
What color scheme do you have in mind for this stealth recon mech? Maybe it blends in with the terrain like a spider or a chameleon so it's hard to spot..
What color scheme do you have in mind for this stealth recon mech? Maybe it blends in with the terrain like a spider or a chameleon so it's hard to spot..
21 February 2022, 21:20
S M
@JD well actually it is already painted grayish green with few brown and green triangles and blue bands as markings. While choosing the camo I considered something similar that armored vehicles of Swiss Armed Forces uses, but they were not cool enough so I ended up with this. Currently it seems maybe too dark, but it could be lightened or I should paint the terrain as dark.
@JD well actually it is already painted grayish green with few brown and green triangles and blue bands as markings. While choosing the camo I considered something similar that armored vehicles of Swiss Armed Forces uses, but they were not cool enough so I ended up with this. Currently it seems maybe too dark, but it could be lightened or I should paint the terrain as dark.
22 February 2022, 17:10
S M
Thanks, mates and welcome aboard, Simontie! I was depended on Army Painter's "Battlefields Basing Set" so the grass is maybe too big for the scale.
Thanks, mates and welcome aboard, Simontie! I was depended on Army Painter's "Battlefields Basing Set" so the grass is maybe too big for the scale.
4 March 2022, 15:53
Simon Nagorsnik
Very convincing look - I really like it!!
Reminds me of my mountain tours😄
Very convincing look - I really like it!!
Reminds me of my mountain tours😄
4 March 2022, 15:56
Robin (WhiteGlint)
Stunning result mate!
That's a really creative and dynamic presentation. 👍
What's with the QR-Code on its head? 😄
Stunning result mate!
That's a really creative and dynamic presentation. 👍
What's with the QR-Code on its head? 😄
8 March 2022, 19:53
S M
It should read NEUSPINNE無人強行偵察機. I just once read it, but my phone could not focus on so tiny code so I first took picture of it with my camera, zoomed in and then read it XD.
It should read NEUSPINNE無人強行偵察機. I just once read it, but my phone could not focus on so tiny code so I first took picture of it with my camera, zoomed in and then read it XD.
8 March 2022, 20:26
Simon Nagorsnik
This is a really imaginative dio!
A presentation like you don't often see!
The vertical optic and a successful model make the whole thing special👍👍
You might notice: I love it😁
This is a really imaginative dio!
A presentation like you don't often see!
The vertical optic and a successful model make the whole thing special👍👍
You might notice: I love it😁
8 March 2022, 20:54
Neil
Well doesn't this just look FANTASTIC mate. Everything about it is super cool! 😎 A very artistic (and scary) build indeed 👍
Well doesn't this just look FANTASTIC mate. Everything about it is super cool! 😎 A very artistic (and scary) build indeed 👍
8 March 2022, 23:50
Torsten
Very nicely done, great build, beautiful painting and the idea and implementation is the absolute eye-catcher, so 😎
Very nicely done, great build, beautiful painting and the idea and implementation is the absolute eye-catcher, so 😎
9 March 2022, 12:25