mittakaavan mallintamistietokanta | stash manager
musclecarfan
Bill Newcomer (musclecarfan)
US

1965 Pontiac 2+2

Kommentit

31 28 October 2022, 06:15
Bill Newcomer
Started on this earlier this week.
28 October 2022, 06:16
Kyle DeHart
Sitting down for this one as well
31 October 2022, 05:15
Bill Newcomer
Deflashed and puttied all four bodies. The 2+2 kit tail panel/bumper has the incorrect larger Bonneville tail lights. The new Bonneville has a custom version tail panel without the bumper that have more appropriately sized tail lights. Whittled them both in an attempt to marry them together.
4 November 2022, 06:26
Dominik Weitzer
interesting. will take a look 😉
4 November 2022, 09:48
Kyle DeHart
Can't wait to see these big pontiacs start to take shape Bill
4 November 2022, 09:54
Bill Newcomer
Made some progress this weekend. Deflashed/deburred the chassis and engine bit. Fine tuned to fit of the correct tail panel to the body and the cut down bumper. Did some emblem artwork and test prints of them in the computer.
21 November 2022, 06:25
Bill Newcomer
Sorted and selected all my engine parts. Dechromed the parts that needed cleaned. Mounted all the parts to hopefully paint this weekend.
24 November 2022, 23:39
Kyle DeHart
Get that 8.6:1 compression ratio stuff out of here. 😂. Pretty solid engine lineup though
25 November 2022, 00:02
Bill Newcomer
I got the custom tail panel and the factory bumper spiced together. My protective tape peeled the chrome. I have it soaking in bleach in preparation to rechrome it.
27 November 2022, 03:19
Bill Newcomer
Foiled scripts and emblems prior to paint. Body primered. Re-revealed said emblems and scripts. Going to be painted metallic black.
28 November 2022, 04:29
Christian W
So, you're on the big Pontiac wave. Like it and watching that quartett 🙂
28 November 2022, 05:30
Bill Newcomer
Christian, Thanks. I am on a roll and I have gathered all the misc parts to finish each of them.
28 November 2022, 06:06
Bill Newcomer
Merged rear bumper and tail panel dechromed.
Too long tail light lenses cut shorter and modified for illusion of divider(s)
Body in paint. Testors bottle enamel Metallic Black.
It was not quite as dark as I wanted, but It will do.
5 December 2022, 01:48
Jv
Love you big girls builds all very butiful cars
5 December 2022, 06:37
István Szücs
Nice paintjob!
5 December 2022, 08:44
Bill Newcomer
Thank you, Jv ans Istvan.
6 December 2022, 04:18
Bill Newcomer
Cut front seats free and modified bases.
7 December 2022, 06:42
Dominik Weitzer
nice paintjob!
7 December 2022, 07:38
Bill Newcomer
Thanks Dominik. The gloss is just how it sprayed out.
8 December 2022, 04:35
Bill Newcomer
Scrounged up a bunch of shifters for the consoles. I am going all 4-speeds. A stick shift in in automatic console plate is just wrong. Fabricated shifter boots and am going to use curved straight pins as shifters. Took all afternoon to sand the little bits.
11 December 2022, 04:08
Bill Newcomer
Sprayed the modified rear tail panel and bumper chrome today. I like how nice it turned out.
8 January 2023, 00:56
Kyle DeHart
Looking really nice
8 January 2023, 01:26
Jarrett
Love the chrome bumpers. What chrome solution do you happen to use? I bought AK Super Chrome 60ml bottle, $23, and a Mototow 5mm wide Chrome paint marker, wow what for 35 bucks lol.
10 January 2023, 02:52
Bill Newcomer
Jarrett, I used Green Stuff World chrome based on a YouTube review by Barbatos Rex a few months ago. I used a 0.5 mm needle and shot a gloss black spoon. It did not like heavy spray. Unded up with orange peel on the spoon. Kept air pressure at 20 psi but throttled the paint way back with the airbrush limiter. Multiple light passes let me fill in the grille without getting too heavy on the ridges. Laid down pretty nice. Not as shiny as kit chrome but nobody's is (yet).

It actually looks better in person than it does in the pic.
10 January 2023, 05:38
Jarrett
Great results as they look great. Cannot wait to see the finished builds!
10 January 2023, 13:40
Kyle DeHart
It looks like a nice, scale appropriate chrome in the photos. Appreciate you sharing the technique.
10 January 2023, 14:58
Dominik Weitzer
i hope, you didn't loose control about all scratch build parts in the different builds :-D .
nice work on both 😉
10 January 2023, 15:19
Bill Newcomer
Jarrett, Thanks, I am looking forward to how they turn out as well.
Kyle, You are welcome,
Dominik, I hope not to. I am doing it to expand my skillset but still have the desire to see the finished product. Thank you for the compliment.
11 January 2023, 05:19
Bill Newcomer
With 3 of the 4 consoles done, I started on the dashboards for the three 65s in my batch builds. Fortunately, the new 65 Bonneville kit comes with 3 sets of decals for the dash. If I don't mess any of them up, I can utilize all 3 sets. I carved out the back of the dash behind the speedometer, to permit using the decal(s) as-is on the backing paper.
29 January 2023, 01:01
Bill Newcomer
Finally got the dash done on the 2+2. Used panel liner to get the black background on the dash. I took about a dozen applications over weeks to get it to fill in properly. Used the same technique as the Bonneville for the window crank handles. 3 down 1 to go.
30 October 2023, 02:43
Christian W
This looks awesome! Wow.
30 October 2023, 05:06
Kyle DeHart
The whole interior looks amazing. These will certainly be the nicest Pontiacs on the block.
30 October 2023, 07:43
Frank Molnar
Looking good mate 👌
30 October 2023, 19:51
Bob Hall
Big girls looking good !🤘😎🤘
30 October 2023, 20:07
Nigel Chapman
Absolutely stunning
30 October 2023, 20:16
Bill Newcomer
Thank you, Christian, Kyle, Frank, Bob and Nigel. The 3 interiors have gotten WAY more effort than I generally invest. I am glad someone is seeing them before they hide away.
31 October 2023, 02:52
Christian W
Everybody on svalemates can see them. They look so fantastic.
1 November 2023, 09:51
Tom ...
Wow, Bill. That is amazing detailing! Just stunning!
2 November 2023, 23:47
Bozzer
Gotta admit Bill, you knocked it out of the park, on this one!
3 November 2023, 00:17
Bill Newcomer
Thank you, Christian, Tom and Bozzer.
3 November 2023, 03:31
Bill Newcomer
After deciding to go modern on the wheel choice, the open spokes begged for disc brakes. I got some Pegasus ones that are compatible with their wheels. Since I am actually using the metal rear axle which allows the tires to rotate, I did not like the calipers going round and round with them. I used the extra lowering hole in the chassis to add a second axle pin. With 1/8" tubes glued to the discs, the tires can rotate while the calipers stay put. Yes, I know the discs do not rotate but, they are not separate from the calipers.
23 December 2023, 19:47
Mike Thomas
Fantastic piece of work, sir! I have to mention 2 things. #1: As per your photo #6, why was I dumb enough to pay 20 bux for a Mr. Hobby corrugated box to hold parts when you made one for, I'm guessing, a lot cheaper? Color me stoopid!! #2: You went the extra to make sure the calipers don't move while the wheels rotate. That's a great idea, well executed, but I am on the opposite side of that street. I make sure my wheels DON'T rotate. I have this fear of models rolling off the shelf for whatever reason and I can't stand the thought of my 110 piece model laying on the floor in 135 pieces!
23 December 2023, 20:55
Kyle DeHart
Nice work Bill. That's a very cool idea.
24 December 2023, 00:16
Jv
Not just one build with some innovative ideas
Very cool
24 December 2023, 09:39
Bill Newcomer
Mike, Thank you. Yes I did make the corrugated skewer holder box for free. I get lots of Amazon boxes around here. I rarely have wheels that roll for the exact reason you mentioned.
Thanks Kyle and Jv. 🙂
24 December 2023, 09:58
Bill Newcomer
The last of my 4 Big Girls builds. A 1965 Pontiac 2+2 with a 376HP 421 Tri-Power and a 4-speed. This one was painted in Testors Metallic Black. Since she is a "Bad" girl, She wears the equivalent of high heels in the car world.

Comments welcome.
1 January, 19:31
Kyle DeHart
And a wonderful conclusion to your Big Girls series. One more excellent color choice. And I like the wheels too. I really enjoyed following along with these builds. Great job
2 January, 00:57
Bill Newcomer
Thank you, Kyle. 🙂
2 January, 01:00
Chris
I love the garage so much. My dad was born in Detroit and told me stories about him cruising Woodward in the mid-50s.
2 January, 01:54
Bill Newcomer
Thank you, Chris. Never been to Woodward. It is a bucket list item.
2 January, 06:03
Dominik Weitzer
beautiful. it looks great with the interieur in blue. good job !
11 January, 10:16

Album info

Part of my "Big Girls" project. Basically stock though I may customize the rear. Intend to paint it metallic black with customized wheels.

138 kuvien
1:25
valmistunut
1:25 1965 Prestige Pontiac Grand Prix (AMT/ERTL 6873)1:24 Pontiac Bonneville (Hasegawa CB-3)1:25 1965 Pontiac 2+2 (AMT/ERTL 6629)2+

Kaikki albumit

Näytä kaikki albumit »