seinä
Wall
NLAWScametovisitlisäsi uuden valokuva-albumin.
All comments (12) » 29 16 July, 13:41
Anatolii SmyshliaievIf still relevant.
Pic 43-45. Before gluing the fuselage roof to the lower part, I glued 2 spacers from sprue scraps between the walls.
Pic 46 and 47.
I simply cut off the inner side of the hood wall, leaving the outer side untouched, achieving a tight fit along the outer surface. And I puttyed a little bit on the front of the hood.
24 September, 08:14
August 22, 2024
NLAWScametovisitIt seems like hawk graphics is closed down 🙁 . Anyone have any recommendations for how I can get like, a custom print of waterslide decals to replicate the sets they sold?
3 June, 12:24
bughunterThe web site is still reachable and so not mention a close down, but I have not checked phon number or email. But yes, the newest decals marked with "NEW" are from 2012.
May be you can find a mate with the set in stash to do a high resolution scan for a print? The quality will not be same I guess and white is not easy to print.
3 June, 12:56
Ben MI had good luck with stsdecals.com - if you send them a scan of what you want, they can print them. The ones I ordered were thin and strong.
22 August, 01:46
August 19, 2024
August 18, 2024
NLAWScametovisitlisäsi uuden valokuva-albumin.
121 kuvien
Oliver Hazard Perry Build
1:350
Final coat of varnish after attaching the flight deck nets. She looks amazing.
projekti: USS Ford (FFG-54)
10+All comments (11) » 38 8 March, 03:26
NLAWScametovisitThank you all for the feedback and support! I really loved building this kit, and I loved all the details of the OHP class that I learned in the process. This kit really was an amazing way to get into modeling.
17 August, 00:59
July 16, 2024
July 15, 2024
NLAWScametovisitlisäsi uuden valokuva-albumin.
This album no longer exists
0 kuvien
Seasprite Color referencesThis album does not contain any images.
1:72
projekti: Grandfathers UH-2A
2+15 July, 11:23
June 16, 2024
June 14, 2024
June 10, 2024
June 3, 2024
May 25, 2024
May 24, 2024
May 21, 2024
May 16, 2024
May 15, 2024
May 10, 2024
NLAWScametovisitwill attend
Sea Patrol Aircraft Flying Boats or Land Based will do! All nations and time?
1. kesäkuu 2023 siihen asti kun 31. saattaa 2024
1. kesäkuu 2023 siihen asti kun 31. saattaa 2024
10 May, 19:41
NLAWScametovisitlisäsi uuden valokuva-albumin.
5 kuvien
Crimson Skies warbird
1:200
did a tamiya panel liner wash over the whole thing, which honestly looks really good but i have to get all the cotton bu...
projekti: Crimson Skies Bell Valiant MkII
Scratchbuilt
4 7 May, 02:05
May 8, 2024
May 7, 2024
NLAWScametovisitFirst three day weekend I've had in a while that's not full of stressful tasks, so what do I decide to do? Clean the basement so I can set up a new workbench. Amazing choice NLAWS, your commitment to not just relaxing remains unchallenged.
1 5 May, 17:49
May 6, 2024
May 5, 2024
NLAWScametovisitWhat's the best way to measure masking for antifouling paint on a hull?
5 May, 00:43
May 4, 2024
NLAWScametovisitOne nice thing about having a British mother in law is that apparently she just... Has airfix kits lying around? Came home from a late shift the other day and there was just a BAe Hawk 1:72 kit sitting on the counter??!?
1 4 May, 21:29
May 3, 2024
May 1, 2024
April 28, 2024
April 27, 2024
NLAWScametovisitlisäsi uuden valokuva-albumin.
131 kuvien
Kingfisher build
1:72
"navy" decal is taken from an ICM 1:48 scale firebee kit, but I really wanted some white lettering on here
projekti: Vought Kingfisher
9+All comments (46) » 43 13 March, 15:12
April 26, 2024
April 22, 2024
April 21, 2024
April 20, 2024
NLAWScametovisitFirst hour spent getting the hang of airbrushing! Wife really must love me cuz she got me a compressor, spray booth and airbrush for my birthday! Used vallejo gray primer to practice on some small parts, but seem to have spent most of it priming my fingertips! X0 regardless, I can already see how this is a game changer, so excited to learn this new skill!
2 18 April, 18:45
gorbyHow is your first experience with an airbrush going? It can be quite frustrating to start with but well worth it in the end. I found Tamiya acrylic the easiest paint to spray, with Vallejo a little less easy, Revell a lot less easy and Humbrol acrylic impossible.
Hope you get the hang of it.
20 April, 07:21
NLAWScametovisitIt seems to be going well! learning the different pressures and thinning consistencies is difficult but its all part of the process, and I'm definitely starting to understand how much you need to keep the brush moving and not hold on one spot. So far I've used some Tamiya lacquer and some Vallejo primer, but im going to be using more tamiya acrylic soon! Thank you for the encouragement!
20 April, 13:35
April 19, 2024
April 18, 2024
April 17, 2024
April 15, 2024
April 12, 2024
April 11, 2024
April 10, 2024
April 1, 2024
March 31, 2024
![1:144 bEXM-14TS Cielnova Custom [Space Type] (Bandai Spirits 5066029)](/products/img/6/1/9/1530619-129851-27-t180.jpg)
March 29, 2024
March 28, 2024
March 26, 2024
March 22, 2024
March 21, 2024
NLAWScametovisitWhere are we at on using cellulose thinner? Is it a decent replacement?
21 March, 23:21
November 4, 2024
March 21, 2024
March 20, 2024
NLAWScametovisitwell this is adorable
US
M76 Amphibious Cargo Carrier "Otter" (Early Production) Gecko Models 1:35
35GM0102 2024* Uusi työkalu 2 20 March, 20:00
March 19, 2024
March 17, 2024
March 14, 2024
NLAWScametovisitMasking Advice?
Does anyone have any advice for how to get your masks secured? I've been having a lot of trouble with colors bleeding under the masks, even when ive tried to be careful about pressing the masks down as tight as possible. I'm brush painting, if that's a factor.
Does anyone have any advice for how to get your masks secured? I've been having a lot of trouble with colors bleeding under the masks, even when ive tried to be careful about pressing the masks down as tight as possible. I'm brush painting, if that's a factor.
All comments (7) » 13 March, 20:54
Martin OostromIf you're going for the paint-the-edge-shut method, you'll want to cut the tape loose after painting, instead of just ripping it off.
14 March, 17:18
March 13, 2024
NLAWScametovisitlisäsi uuden projektin.
2 24 February, 00:27
NLAWScametovisitUpdate: At some point, the American OHPs were refitted from the weird curved strut split deck boat launch with overhead davit to a (possibly 2-ton) crane davit that sits to the rear of the ships boat on the raised deck. The raised deck also appears to have been unified in that refit, with the weird curved strut completely removed and the gap decked over. Unfortunately, the older davit appears to have exclusively used a whaleboat ships boat, and the new style uses the RHIB. The kit, however, uses the old style overhead davit and split deck, but includes the refit RHIB. So, I'm considering either buying a 1:350 scale whaleboat (still need to confirm what model boat it was) or use spare polystyrene board to unify the raised decks and scratch build the crane style Davit.
5 March, 00:26
NLAWScametovisitbriefly pausing project as of March 2024. I want to knock out a few other kits and develop my skills a little bit more, especially as we get towards to detail and painting parts
13 March, 21:08
NLAWScametovisitlisäsi uuden valokuva-albumin.
11 kuvien
Firebee progress
1:48
I'm gunna step back from this for a while. This second firebee just isn't coming out the way I wanted it. Somehow I feel...
projekti: Q-2A Firebee
2+ 5 11 March, 20:37
wnolder.php?lang=fi
2024-03-13 15:05:07
2024-02-24 00:03:55
139581
/ajax/wnolder.php?lang=fi&sd=2024-03-13 15:05:07&md=2024-02-24 00:03:55&filter=&w=139581
todo