TAM VCTP conversion set
FC Model Trend | N° 37144 | 1:35
Statistiques
- Marque:
- FC Model Trend
- Titre:
- TAM VCTP conversion set
- Numéro:
- 37144
- Échelle:
- 1:35
- Type:
- Kit de détaillage
- Sorti:
- 2023 Nouvel outillage
- Sujet:
- Schützenpanzer Marder » VTT/VBCI (Véhicules)
Contenu de la boîte
Résine (3D) (Light gray)
Ce qu'il y a dans la boîte »Conçu pour
Place de marché
Boutiques en ligne
USD 64.15
En stock »SKU alternatifs pour FC Model Trend 37144:
FCMT37144
Remarque: Les prix et la disponibilité ne sont qu'indicatifs. Vérifiez également si le produit correspond réellement!
Avis sur le contenu de la boîte
Examens externes
Nous n'avons connaissance d'aucun avis sur le contenu de la boîte TAM VCTP conversion set (#37144) de FC Model Trend.
Commentaires
Andreas Lott
It has been my dream model for years! FCM has great ideas that are sure to inspire many people. The implementation, i.e. the print ... I'll list it:
- the edges of the roof are not printed straight
- a slight crease at the back, both sides
- Handles on the fan grille are so thin that they break off when you look at them
- Smoke discharger as always from FCM are underscale
- on the MG (FN MAG), magazine holder is great, the barrel has 3 sprue points one after the other, so more than 2 mm sprue in one piece
- grid, everywhere and especially on the tower
- the two barrels are not pretty, they don't have any holes in the fire damper
That's just the most striking thing!
Installing the roof is surgical work; it's better to grind the Marder roof flat, fill the holes and then put the parts on.
3D printing goes definitely much more better.
Decide for yourself whether it's worth the money to you.
It has been my dream model for years! FCM has great ideas that are sure to inspire many people. The implementation, i.e. the print ... I'll list it:
- the edges of the roof are not printed straight
- a slight crease at the back, both sides
- Handles on the fan grille are so thin that they break off when you look at them
- Smoke discharger as always from FCM are underscale
- on the MG (FN MAG), magazine holder is great, the barrel has 3 sprue points one after the other, so more than 2 mm sprue in one piece
- grid, everywhere and especially on the tower
- the two barrels are not pretty, they don't have any holes in the fire damper
That's just the most striking thing!
Installing the roof is surgical work; it's better to grind the Marder roof flat, fill the holes and then put the parts on.
3D printing goes definitely much more better.
Decide for yourself whether it's worth the money to you.
21 June, 09:56
Andreas Lott
All parts are 3D prints and contains only the parts shown on picture. It is a conversion for the SPz Marder from Tamiya.
All parts are 3D prints and contains only the parts shown on picture. It is a conversion for the SPz Marder from Tamiya.
21 June, 11:17
Matériel de référence
MARDER 1 A5 / 1A5A1 Die neuesten Varianten des Schützenpanzers Marder in der Bun...
Militärfahrzeug Spezial N° 5046
Jochen Vollert, Carl Schulze
2013 Schützenpanzer MARDER Die technische Dokumentation des Waffensystems
Hans-Peter Lohmann, Rolf Hilmes
2011 Tous les livres » (4 au total) Tous les photoscopes » (28 au total)