Fil d'information
![](/profiles/img/28845-385-s.jpg)
Hrm, I have this Iwata HP-CS Eclipse 0.35 airbrush and I am stressing a little when trying to airbrush on some camo (without masking). I didn't want to use masking tape and I don't have any camo goo to spread over as masking either.
Like with my other attempt with this other tank I think I have to airbrush on desert yellow over the darker colors and try correct the shapes of the camo. The big part on the side and the wheels arent' glued on.
I've never done this before (I used masking tape the last time I worked on a tank), I think I have to make sure the Vallejo Air paint is thin, and then try lower the psi way below 20 psi and try get close to get a crisp line when airbrushing. And I don't want to take off my needle guard to get closer, as I don't want to bend the needle tip, again. 🙂
I didn't want to make a WIP album for this, just another side project.
[img1]
Like with my other attempt with this other tank I think I have to airbrush on desert yellow over the darker colors and try correct the shapes of the camo. The big part on the side and the wheels arent' glued on.
I've never done this before (I used masking tape the last time I worked on a tank), I think I have to make sure the Vallejo Air paint is thin, and then try lower the psi way below 20 psi and try get close to get a crisp line when airbrushing. And I don't want to take off my needle guard to get closer, as I don't want to bend the needle tip, again. 🙂
I didn't want to make a WIP album for this, just another side project.
[img1]
3 July, 12:13
![](/profiles/img/109950-425-s.jpg)
marqué cet article comme sur commande
![1:48 B-26B Rear Interior ICM (Eduard 491455) 491455](/companies/img/81-107680-98-p.png)
B-26B Rear Interior ICM
Eduard 1:48
491455 3 July, 12:13
![](/profiles/img/109950-425-s.jpg)
marqué cet article comme sur commande
![1:48 B-24J Undercarriage HOBBY BOSS (Eduard 481140) 481140](/companies/img/81-107680-98-p.png)
B-24J Undercarriage HOBBY BOSS
Eduard 1:48
481140 3 July, 12:13
![](/profiles/img/26487-259-s.jpg)
possède cet article
![1:72 HAF F-4E & IRIAF F-4E/RE-4E Phantom (DXM Decals 41-7151) 41-7151](/products/img/8/4/8/1520848-32441-58-t180.jpg)
HAF F-4E & IRIAF F-4E/RE-4E Phantom Collection #2
DXM Decals 1:72
41-7151 (DXM72050) 2024 Nouvel outillage 3 July, 12:11
![](/profiles/img/48243-425-s.jpg)
possède cet article
![1:35 KrAZ-256, Wheel set ID-304, under load, road version (Armor35 ARM35361) ARM35361](/products/img/5/8/6/1294586-38473-77-t180.jpg)
KrAZ-256, Wheel set ID-304, under load, road version (10 pieces + spare wheel + front beam)
Armor35 1:35
ARM35361 2020 Nouvel outillage 3 July, 12:09
![](/profiles/img/26341-154-s.png)
marqué cet article comme sur commande
![1:72 BMP-1 & BMD-1 (S-Model (China) ST007209) ST007209](/products/img/1/9/8/1497198-27571-77-t180.jpg)
Middle East AFV Set D
BMP-1 & BMD-1 2 in 1 S-Model (China) 1:72
ST007209 2023 Nouvelles pièces Multi sujets (2)3 July, 12:08
![](/profiles/img/48243-425-s.jpg)
veut cet article
![1:35 KAMAZ-43253 (biaxial) Wheel set KAMA-310 (Euro), highway version, under load (Armor35 ARM35375) ARM35375](/products/img/6/5/6/1341656-38473-61-t180.jpg)
KAMAZ-43253 (biaxial) Wheel set KAMA-310 (Euro), highway version, under load (6 pcs. + 1 spare + front beam)
Armor35 1:35
ARM35375 2021 Nouvel outillage 3 July, 12:07
![](/profiles/img/107410-798-s.jpg)
a ajouté un nouvel album photo.
5 31 May, 03:38
![](/profiles/img/127937-557-s.jpg)
This looks really good. How did you do the mottling for the scheme? I'm working on a heinkel 219 that uses a similar pattern
31 May, 04:28
![](/profiles/img/107410-798-s.jpg)
Hi Chase - make sure you have planty of reference photos to the scheme on the aircraft that you are building. The process I used is as follows: 1) airbrushed the base coat, in this case Light Blue (RLM76), then used a clear gloss coat to seal the base coat. 2) I used a coloured pencil to lightly trace the 'wave lines' over the aircraft - referring a lot to my reference photos. 3) I used Grey Violet (RLM75) to make the wave lines - I did this free hand using my airbrush. The method I used was spray very close to the surface of the model and follow the pencil lines that were done in step 2) - my best advice is to take it slowly and do a little section of the model at a time. I also started my spray first on a piece of paper towel close to the model then carried onto the surface of the model - I found this gave me a more cosistent line. Also, if you make a mistake - quckly wipe off the affected area with a damp piece of paper towel (hence why we have the gloss coat in step 1) any mistakes with simply wipe off and you can start again. Oh and be sure sure you use acrylics as they wipe off easily if you do make mistakes. Hope this helps!
31 May, 12:39
![](/profiles/img/user-s.jpg)
veut cet article
![1:48 P-47D Thunderbolt "Bubbletop" & 1/4-ton 4x4 Light Vehicle Set (Tamiya 25214) 25214](/products/img/2/9/7/1482297-27767-50-t180.jpg)
P-47D Thunderbolt "Bubbletop" & 1/4-ton 4x4 Light Vehicle Set
Tamiya 1:48
25214 2023 Ensemble de modèles Multi sujets (2)3 July, 12:04
![](/profiles/img/user-s.jpg)
possède cet article
![1:72 Mig-21MF (Kovozávody Prostějov KPM0088) KPM0088](/products/img/8/4/7/1080847-29300-70-t180.jpg)
Mikojan-Gurjevič
Mig-21MF "Fishbed J" Third World Users Kovozávody Prostějov (KP) 1:72
KPM0088 2017 Nouveaux décalcomanies 3 July, 12:00
/fr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=fr
35
35
/fr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo