Fil d'information
![](/profiles/img/user-s.jpg)
veut cet article
![1:35 Sd.Kfz. 234/4 Pz. Spähwagen (Rye Field Model RM-5118) RM-5118](/products/img/9/6/6/1564966-32809-86-t180.png)
Sd.Kfz. 234/4 Pz. Spähwagen with Full Interior
Rye Field Model (RFM) 1:35
RM-5118 (RM5118) 2024* Nouvelles pièces 17 August, 18:15
![](/profiles/img/65226-827-s.jpg)
a ajouté un nouvel album photo.
13 images
Mirage 2000N Dreammodel![View album, image #13 View album, image #13](/albums/img/3/9/5/1787395-65226-30-720.jpg)
1:72
The decals in the kit are amazing but also really hard to use. They are strong and very thin. You really need to be care...
Projet: Mirage 2000N dream model
19 10 August, 21:24
![](/profiles/img/user-s.jpg)
marqué cet article comme négociable / vendable
![1:35 Chasseurs de chars (Heller 111) 111](/products/img/0/7/2/169072-15378-77-t180.jpg)
Chasseurs de chars Groupe de combat France - Infanterie contemporaine
Heller 1:35
111 1977 Nouvel outillage Prix pas encore fourni
17 August, 18:13
![](/profiles/img/35928-142-s.jpg)
a ajouté un nouvel album photo.
22 28 November 2021, 13:51
![](/profiles/img/78784-523-s.jpg)
Beautiful MiG collection.
You can never build too many Fishbeds. 😄 👍
30 November 2021, 12:57
![](/profiles/img/13641-502-s.jpg)
Gonna repeat myself: love it! 🙂 The pics look bit dark, don't they?
30 November 2021, 13:27
![](/profiles/img/35928-142-s.jpg)
Thanks Jan, WhiteGlint and Lukasz! Indeed the photography is quite sub par. I have been meaning to improve upon that but 2021 was not kind to me🙂 Better setup and lightning in 2022 I hope🙂
30 November 2021, 21:38
![](/profiles/img/139378-382-s.jpg)
a ajouté un nouvel album photo.
15 images
Zvezda KA-52 “Aligator” Ukraine War - build progress![View album, image #1 View album, image #1](/albums/img/7/9/8/1775798-139378-61-720.jpg)
1:72
Russian Air Force Pilot training facility :)
Projet: Ka-52 "Alligator"
11 28 July, 11:08
![](/profiles/img/139378-382-s.jpg)
Thanks Michael for the input, the more I look at the two Tamiya colors the more inclined I get to use them, also I already have them and they are of good quality.
Will continue to post progress.
14 August, 11:22
![](/profiles/img/34360-107-s.jpg)
Looks good so far. Following.
How good and detailed do you think the kit is?
16 August, 19:38
![](/profiles/img/139378-382-s.jpg)
Hi Shar, the details are good enough for a 16 EUR kit but the build is not easy, struggled a lot with the canopy and cockpit. It's not a perfect representation of the real Alligator as it is built after the initial variant / prototype (EOP above, no camouflage scheme and paint references for it, no countermeasure system under the back landing gear and the nose is a bit different as well). The panel lines are recessed, so hopefully weathering will go smooth.
16 August, 20:22
![](/profiles/img/24541-489-s.jpg)
marqué cet article comme sur commande
![1:24 Chaparral 2D - Nürburgring 1966 Winner (Modeler's 5405/4200) 5405/4200](/products/img/5/9/9/129599-11054-t180.jpg)
Chaparral 2D - Nürburgring 1966 Winner or 1966 Le Mans
Modeler's 1:24
5405/4200 1990 Nouvel outillage 17 August, 18:10
![](/profiles/img/23938-707-s.jpg)
a ajouté un nouvel album photo.
151 26 February 2023, 16:11
![](/profiles/img/20442-422-s.jpg)
Exceptional work so far Alec.
You're going to show us all up again aren't you? 😉
(Come to think of it that should have been a statement rather than a question. 😄 )
26 February 2023, 17:41
![](/profiles/img/23938-707-s.jpg)
Thanks Gorby! Not my intention, just sharing my modeling joy in my characteristic pedantic manner 😄
26 February 2023, 18:36
![](/profiles/img/14143-361-s.jpg)
One of my favorite prop classics! Please a seat in the first row! Excellent start. I'm curious for more scratchbuilding especially flaps & co. 🙂
26 February 2023, 18:44
![](/profiles/img/23938-707-s.jpg)
For such exulted following, I better up my game. Welcome to the show mates, I'll try not to disappoint.
27 February 2023, 02:10
![](/profiles/img/36121-874-s.jpg)
excellent and useful build tips....didn't know about acrylic glue....thanks for sharing the build!!
1 March 2023, 10:35
![](/profiles/img/14213-529-s.jpg)
Nice to see another project form you, Alec. Great start. Looks like the Neptune need a lot of extra detailing.
1 March 2023, 11:15
![](/profiles/img/23186-383-s.jpg)
Very nice work in the cockpit, Alec 👍 I'm looking forward to see next steps. Also, i'm surprised how big this bird is 😮
3 March 2023, 12:32
![](/profiles/img/23938-707-s.jpg)
Thanks gents! Erik, you are right, the additional details will make it a nicer build but it's noteworthy how good this kit is after so many years. And yes Jakube, it's a BIG bird 🙂
4 March 2023, 00:12
![](/profiles/img/14143-361-s.jpg)
Alec: they were several colors schemes used on dash 7. Which scheme intend you to build?
4 March 2023, 06:46
![](/profiles/img/23938-707-s.jpg)
Hello Bernhard - I really like the later schemes of Light Gull Gray with white fuselage decking. I came across several renditions of BuNo 147967's scheme (see my project's banner) and as long I figure out the markings (specifically, what kind of decals I will need to make myself), this will probably be the one.
4 March 2023, 23:25
![](/profiles/img/23938-707-s.jpg)
Welcome Oliver! I have added info about my fun time with Plus Model's flaps 👍
5 March 2023, 16:43
![](/profiles/img/69549-161-s.jpg)
Really interesting project. I believe that in your rendition it will be another exceptional model. I will definitely follow this build 👀
6 March 2023, 00:06
![](/profiles/img/124825-405-s.jpg)
A lot of work ahead, but it seem that you have it worked out before hand. Nice
6 March 2023, 00:38
![](/profiles/img/14143-361-s.jpg)
Excellent start on the wings. Watching for next steps. 🙂
P.S. is #PJ 12 in gullgray & white you choice?
7 March 2023, 16:44
![](/profiles/img/69549-161-s.jpg)
Alec, your modifications to this kit are great. 👍 I just don't understand one thing. Is there any reason why you didn't simply weaken parts 62-65, 66 and 67 from the inside and then glue the Eduard parts to them?
23 March 2023, 00:15
![](/profiles/img/23938-707-s.jpg)
Welcome Jakube 👍
Ludvíku: A fair question regarding a choice I myself questioned. I though the Eduard parts were too thin (the formed reinforcing metal structure on the interior of the doors seems quite deep to my eye). Also, the front wheel bay door structure looks different than the Eduard interpretation. All that said, I think thinning the kits' parts and adding styrene strips would have been easier. Cheers 👍
23 March 2023, 11:13
![](/profiles/img/69549-161-s.jpg)
Thank you for your reply. I don't mean to disparage your work in any way. I knew you had a reason. I just didn't know what it was.
The result looks very good. 👍 Especially considering the actual size of the parts in 1:72 scale. It's obvious you take great care with all the details. I wish you a steady hand and a good eye throughout the build of the model and look forward to seeing the progress. 🙂
23 March 2023, 12:11
![](/profiles/img/38460-541-s.jpg)
Most impressive Alec.. That Metalwork is awesome!
Love the outcome so far👍
23 March 2023, 19:12
![](/profiles/img/23938-707-s.jpg)
Thank you mates! Frank: I imagine you and others will relate 🙂. Recently I was going through my "keep for just in case" items and failed to get rid of much. Most of such items do not occupy a lot of space, it's much harder to justify keeping junk that does 😉
31 March 2023, 11:18
![](/profiles/img/21997-347-s.jpg)
That it also a fact: if you don't used a thing for years and drop it in the bin one week later you will need it! That is caused by Murphy's law.
31 March 2023, 11:20
![](/profiles/img/23938-707-s.jpg)
Greetings mates! Contrary to what you may be thinking, I have NOT been screwing off and AM actively working on this, just veeery slowly. Here is an update on my labors.
16 July 2023, 15:27
![](/profiles/img/69549-161-s.jpg)
I'm watching this with great interest. I am always amazed at what can be done on this scale. 👍
17 July 2023, 08:11
![](/profiles/img/23938-707-s.jpg)
Thanks much guys. This gives me strength to keep plugging away at this beast 😄
17 July 2023, 12:32
![](/profiles/img/14213-529-s.jpg)
Impressed by your build, great scratching and use of "household" materials.
18 July 2023, 09:46
![](/profiles/img/23938-707-s.jpg)
Cheers friends. Just so you don't think I gave up on this beast, here are some progress pics. This project has been a MONSTER but it's progressing, despite my every effort to screw it up.
3 February, 00:11
![](/profiles/img/23938-707-s.jpg)
Thanks gents for stopping by and for your kind comments. It's always a pleasure to read those 👍
4 February, 01:33
![](/profiles/img/127872-122-s.jpg)
I love your journaling, so much to learn from you, following 👀. Your work is amazing.
4 February, 02:30
![](/profiles/img/21997-347-s.jpg)
Great that you continued to work on this bird and uploaded new pics....
But, have you deleted all old pics and uploaded new ones? Normally I check the date to see, where the news are, but here _all_ pics are of the actual date 🙁 But some were definitely not new for me.
4 February, 18:23
![](/profiles/img/23938-707-s.jpg)
Thank you friends for your comments and support, very appreciated.
Jennifer: I am glad you like my ramblings. I realize I get into the weeds, but I always enjoyed others sharing their progress in detail and it has helped me great deal with my own modeling journey, so I am trying to do the same.
Frank, you are correct. There was a discussion some time ago about the preferred sizing of images for albums and I realized mine were pretty small, so I decided to re-upload the old pics in higher resolution. The teaser in the album marks where new work images begin. I hope it's not a big faux pas to do this as I plan to upgrade some of my older albums this way.
5 February, 01:02
![](/profiles/img/21997-347-s.jpg)
Thank you Alex - the new bigger picture size is for sure a _good_ reason to replace them 👍
There was also a discussion in feature request that replacing pictures by better ones do not trigger a notify. So this can be done behind the scenes without bother anyone..
5 February, 07:19
![](/profiles/img/23186-383-s.jpg)
Hello Alec. I'm glad to see you back here after some short break 🙂
That new vacu canopy looks great 👍
5 February, 09:44
![](/profiles/img/23938-707-s.jpg)
Finally painted something on this bird that will be visible on the outside. Cheers!
24 February, 02:23
![](/profiles/img/user-s.jpg)
A pleasure to follow you on this journey. Sprue goo bubbles are a problem I am familiar with too and is doesn't have to do with stirring. Unfortunately I cannot provide an alternative theory why this happens. Maybe someone out there can enlighten us.
24 February, 07:05
![](/profiles/img/69549-161-s.jpg)
Alec, good progress! 👍 I admire the precision with which you create the details of the model. My admiration is all the greater because your model is in 1/72 scale.
The bubbles could have been caused by a chemical reaction between the sprue material and the solvent, or between the plastic of the model and the "plastic slurry" during drying (similar to adding yeast to dough), but that's just my guess.
24 February, 09:13
![](/profiles/img/27147-902-s.jpg)
Alec, what a no-compromise project! Very inspiring! And fingers crossed that the wind doesn't get out of your sails. 👍🍀
24 February, 09:42
![](/profiles/img/23938-707-s.jpg)
Hmm, interesting observations regarding the sprue goo bubbling, thanks for commenting on that Michael and Ludvik. Ludvíku, I think there is probably something to your theory. I just bought some dissolved putty from GSI and have high hopes for it.
Gordy: "good grief" about sums it up…
Zbynku, thanks for the encouraging post 🙂
24 February, 12:39
![](/profiles/img/14143-361-s.jpg)
Alec: I am very happy to see that this great project continues. You solved the canopy problem very well. I suspect that your self-made part is clearer than the one from the kit….🙂.
Great details on the wheel bays & landing gear, which is also movable! I am looking forward to further progress.🙂
24 February, 13:56
![](/profiles/img/21997-347-s.jpg)
Great and careful work again!
May be your sprue putty layer was too thick? The extra thin glue need a way to go out. So it is may be better to work in thin layers and give the glue the chance to left the plastic.
I'm also not a fan of normal putty, but I used some days ago the Tamiya Light curing putty (I wrote about in my Swallow project). I like it! But also there it is recommended in the manual to use only thin layers up to 2mm. If you put light on a thicker layer it will get too hot inside and create bubbles. But as this hardens quickly with UV-light it is no problem to apply additional layers.
24 February, 17:27
![](/profiles/img/23938-707-s.jpg)
Thank you mates. I think the canopy was the correct decision, the thickness alone makes it so much better. Silver linings…
Bugs, I think you are right about the goo. I did glob it on pretty thick, forgetting all my school chemistry 😄. Thanks for the advice as well, I'll have to look up that Tamiya light curing putty.
24 February, 22:31
![](/profiles/img/50023-373-s.jpg)
Alec, such a gorgeous aircraft which I also want to build. I got dissapointed to find out that the Hasegawa kit has raised lines and I wasn't yet willing to do the effort you are doing now.
Outstanding work, I admire the dedication you're pouring in this project. Thank you for recommending some scribing tools, mine got old and blunt and needed new ones.
One question: why use the saw for scribing? What is the advantage?
10 March, 06:25
![](/profiles/img/15497-946-s.jpg)
I missed this thread completely - outstanding work! Landing Gear, Cockpit, Flaps and much more just makes me feel like a beginner.
10 March, 08:06
![](/profiles/img/23938-707-s.jpg)
Thanks you guys. Thomas, your work looks rather advanced to me 🙂 👍
Marius, this is my first scribing/riveting project on the entire model and I really enjoyed the process. Regarding my use of thin saw blade: on curved surfaces like the sides of a fuselage, I find it difficult to use the UMM scribers. It's hard to describe, you just have to experience it. To get a nice even panel line with the scriber, I apply several passes at low pressure. This is hard to do when you are following a curve because the scriber's "angle of attack" relative to the surface is important and must be continually maintained as you move the tool. Saw works much better and produces a comparable result. Cheers!
10 March, 19:18
![](/profiles/img/user-s.jpg)
I can only second Alecs arguments. Particularly if you have a panelline which was interrupted- by sanding for example - the saw can use the still existing grove as a guide much better than a scriber can.
10 March, 23:24
![](/profiles/img/69735-368-s.jpg)
Wow. What an odyssey of a build log. So detailed and painstakingly explained. Thank you. All aboard for the remainder of this journey.
11 March, 07:03
![](/profiles/img/13641-502-s.jpg)
Dat rivets look great, watching with envy. 👍
Thx for the Dymo tape hint, I have to test it, all these fancy modelling scotch tapes seem too thin for my taste.
11 March, 10:14
![](/profiles/img/23938-707-s.jpg)
Thanks Gary, welcome to the odyssey. We should hit port soon 🙂
Łukasz, Dymo tape is pretty good and readily available, but couple words of caution: its adhesive is very aggressive and tends to leave residue on smooth surfaces, and it's not very "bendy". It sticks to Surfacer fine and comes off the same, but I had it peel off paint on smoother paint finish. The Carving Guide Tape (HIQPARTS CGT-6MM, No) is a better option IMHO but not sure how easily available.
11 March, 12:01
![](/profiles/img/13641-502-s.jpg)
Thx for the additional info. The transparent ones don't work for me at all - my eyesight is too poor 😉
But I think Dymo could be good for the basic rescribing, even before surfacer.
For the later corrections I have these green semi-transparent one, but its edges are not thick enough for me to do the long straight lines:
mojehobby.pl/product..-Edged-Tape-3mm.html
11 March, 12:16
![](/profiles/img/23186-383-s.jpg)
Very nice rescribing, Alec 👍 . As for dymo tape, I have the same experience as you.
Its nice to see, you are using Hauler products. This company is located about 500 meters from my home 🙂
11 March, 16:09
![](/profiles/img/23938-707-s.jpg)
Thanks Clement and Nathan!
Łukasz - for sure, give it a try. For straight scribing, I like a firmer wide tape to keep the "straightness" and Dymo tape works great for that. It's also nice and thick for guiding the scribed. My only complaint, again, is that the adhesive sometimes stay put.
Jakube - thanks for encouragement. Do you mean PlusModel? Or does Hauler makes their PE? Either way, I am jealous 🙂 👍
12 March, 00:12
![](/profiles/img/23186-383-s.jpg)
Alec, i mean Hauler ( scribing template on your pic#110). They really make their PE. I saw it with my own eyes 🙂
12 March, 12:01
![](/profiles/img/23938-707-s.jpg)
Oh yeah, sorry! Got it. I have many Hauler PE sets (as well as their kits) in my stash 🙂
12 March, 12:30
![](/profiles/img/69549-161-s.jpg)
Alec, the longer I follow your work on the model, the more I like it. The care you take with all the details is admirable. 👍
In the time I have been building my models, I have come to the same experience as you. For restoring panel lines on curved surfaces of the model (like the fuselage), a razor saw is best. It's exactly as Michael Kohl writes a bit above.
To transcribe the lines on the model I use (among other things) rulers, which I made from an ordinary rolling ruler metal tape measure. I cut strips of different lengths from it. These strips are flexible and adapt easily to a curved surface. For even more flexibility, the strip can be cut lengthwise into two narrower strips.
13 March, 09:03
![](/profiles/img/50023-373-s.jpg)
This has turned in a very helpful thread with all the discussiond about scribing. I would like to share my own method for irregular surfaces. I'm using tape for electrical cable insulations together with a pointy tool. The tool is normally aimed at scribing access panels or doors, but I use it for larger panel lines too. Check photos #36 and #38 from this album:
MiG-23BN - Iraq - 1982 | Album by Redicus (1:72)
13 March, 11:49
![](/profiles/img/23938-707-s.jpg)
Managed some progress, engines are on the wings. Getting close to assembling this beast and finally painting.
7 April, 17:16
![](/profiles/img/27826-126-s.jpg)
Wow...I can't believe what a huge improvement you are making to this tool. Looks great!
8 April, 18:32
![](/profiles/img/23938-707-s.jpg)
Thanks Cuajete. The beast finally has wings and received a coat of paint. The saga continues...
27 April, 01:41
![](/profiles/img/48972-166-s.jpg)
How did I miss this master-class modelling tutorial? From now I am definitely following this talent show!
12 May, 08:03
![](/profiles/img/13136-468-s.jpg)
Great work on all the detail you added to the Neptune, Alex! Looks fantastic!
12 May, 14:15
![](/profiles/img/69549-161-s.jpg)
Alec, it's admirable what you've done with this model. It looks fantastic. Fingers crossed that you manage to finish it successfully. 👍
The finish line is very close. 🙂
14 May, 15:25
![](/profiles/img/23938-707-s.jpg)
Thanks all for leaving encouraging remarks. It's indeed getting close and chances for me screwing it up loom large: weathering is not my forte…
14 May, 16:47
![](/profiles/img/23938-707-s.jpg)
Danke Oliver!
I am in the final stretch on this one. Just some final weathering and it should be done. Cheers!
11 July, 11:11
![](/profiles/img/17635-610-s.jpg)
This is an amazing build... those main gear bays! I can smell the oil and fuel as if I was standing inside them on a pre-flight walkaround.
11 July, 12:40
![](/profiles/img/95177-962-s.jpg)
An impressive quantity and quality of work, masterpiece by photoetchs and scratchbuild, congrats!
11 July, 20:36
![](/profiles/img/69549-161-s.jpg)
Alec, you're doing top-notch work. The very fine and precise execution of all the details adds to the convincingness of the model. It's really hard to believe that this is a 1/72 scale model. 👍 👍 👍
12 July, 07:43
![](/profiles/img/14143-361-s.jpg)
A true masterpiece! I have looked at the current, new photos three times. And will definitely do it again. Great great great! Detailing, cleanliness, implementation and painting! 🙂🙂🙂
12 July, 10:53
![](/profiles/img/21997-347-s.jpg)
Yeah, I can only sign the last comments! Your careful preparation to allow a clean mounting pays back now 👍
Last week I saw a finished model of this kit at a local club meeting and it reminded me of your build.
12 July, 16:43
![](/profiles/img/23938-707-s.jpg)
Thank you mates for your kind and encouraging feedback. This has been my longest continuous project to date ( too long imho). It's interesting to note that this 1972 tooling still has life in it (based on how many, even today, continue to be built). Certainly not comparable to today's fare, overall it's a very nice kit. Just have to finish few details as I plan to bring it to the IPMS-USA annual contest next week. Cheers.
12 July, 21:07
![](/profiles/img/14143-361-s.jpg)
Alec: Enjoy the exhibition. If I were in the jury, it would be the first place for me just because of the initiative and the skills in scratch building🙂. In my opinion, it is not really art to replace the half the model with brass, resin and 3D, but to create a masterpiece from a 50-year-old kit. 🙂
14 July, 18:50
![](/profiles/img/23938-707-s.jpg)
Thank you Bernhard for your kind comment, I really appreciate it 🙂. Getting a prize would be nice (I am as vain as the next guy), but I keep my expectations low. IPMS-USA judging focuses on build quality and execution, and my skills are not strong in this area. If two models are tied from this perspective, then the more complex one wins, but if there is a clean-built Neptune with no errors but no modifications next to mine, they win. A lot also depends on who shows up (I.e. the models on the table).
I am looking forward to the show as it's a great time to see many great builds in person, chat with fellow modelers and support the hobby. A big plus is that it's close to where I live, so no vendor room limit for this stash hoarder 😄. I will post pictures from the show when I get back.
15 July, 12:12
![](/profiles/img/69549-161-s.jpg)
Alec, I think the chances of success are good. Maybe luck will smile on you. In any case, I'll keep my fingers crossed 🙂
... whatever the outcome, enjoy the show!
15 July, 13:19
![](/profiles/img/17422-305-s.jpg)
Loss for words. The Neptune looks superb. Fingers crossed!
Looking forward for the show photos.
15 July, 13:48
![](/profiles/img/23938-707-s.jpg)
Thanks very much mates. No pressure... 😄 😄 😄 Ludvik is right, I will need some big smiles (hopefully not laughs) from Lady Luck. I have uploaded the final WIP pics, finished build and show albums hopefully by end on July.
17 July, 01:17
![](/profiles/img/20442-422-s.jpg)
This has been a remarkable build to follow, absolutely stunning work mate! If this doesn't win best in show the judges should get better guide-dogs. 😉
17 July, 07:11
![](/profiles/img/50023-373-s.jpg)
Hats down Alec, a true masterpiece. One of the most attractive and special models I have seen here lately!!
17 July, 10:23
![](/profiles/img/user-s.jpg)
I can only agree with Marius and Gorby. I enjoyed following your build immensely. And I will strive to come closer to the cleanliness of your construction, which is impressive.
17 July, 14:41
![](/profiles/img/21997-347-s.jpg)
What a marvellous finale 👍 Hats off to your perseverance!
Good luck and have fun there 🙂
18 July, 05:58
![](/profiles/img/23938-707-s.jpg)
Guys, I really appreciate your really nice comments. I just realized I started this project back in June 2022 and worked on it pretty much continuously since then (with the exception of few months during this past winter). To date, the largest project for me in all aspects. I am in active recovering now (just finished a mojoreset OOB 🙂.
Arrived at the contest yesterday and there were already many worthy builds in my category on the table, so I will be surprised if I even place. So many great modelers out there! The show promises to be a feast for the eyes (there are 2500 registered entries with many more walk-ins expected). Cheers!
18 July, 13:19
![](/profiles/img/27826-126-s.jpg)
Great job, Alec. Fantastic result... I love it!
Congrats!
If this project is not a winner, it is because the judges have had to think a lot to give the prize to someone else. But for the Scalemates colleagues this will be a clear winner in all aspects. Good luck!
18 July, 17:54
![](/profiles/img/23938-707-s.jpg)
Hello friends. Lady luck got drunk and the Neptune received first place in the "1/72 large twin engine aircraft" category 🙂
For those interested, here are links to a selection of pics from the show:
Aircraft: IPMS-USA National Convention 2024 | Album by Pardubak
Military Vehicles: IPMS-USA National Convention 2024 | Album by Pardubak
Figures: IPMS-USA National Convention 2024 | Album by Pardubak
Dioramas: IPMS-USA National Convention 2024 | Album by Pardubak
Other (Ships, Automotive, Sci-fi, Misc, Venue): IPMS-USA National Convention 2024 | Album by Pardubak
29 July, 02:14
![](/profiles/img/user-s.jpg)
I'd say Lady Luck was sober and good mooded. Congrats and thanks for this ambitious, informative and extremely clean and precise build thread. I enjoyed it very much.
29 July, 05:33
![](/profiles/img/27147-902-s.jpg)
Congratulations, Alec! Lady Luck didn't get drunk, she stayed completely sober, because you deserve that first place! 😀🫵👍
29 July, 05:35
![](/profiles/img/20442-422-s.jpg)
Nothing to do with luck mate, purely down to your remarkable modelling skill. Fortunately the judges recognised that. Well deserved award Alec. 🙂
Thanks for the links, I'll enjoy having a look thought them later. 👍
29 July, 06:03
![](/profiles/img/104032-478-s.jpg)
Tomu hovorím modelárčina. Narobíš sa ako kôň a nakoniec 95 percent práce nie je vôbec vidieť. Ešte aj tá konštrukcia krídel nad klapkami je zospodu, skrytá normálnemu pohľadu 🙂
Ale inak úchvatná práca a nádherný model. 👍
29 July, 06:49
![](/profiles/img/17422-305-s.jpg)
Congrats!!!! Well deserved and no luck at all, but a reward for all the tremendous effort put on this kit.
29 July, 07:06
![](/profiles/img/21096-573-s.jpg)
arriving late to the party, but what a trip .. . amazing job everywhere, stunning patience, planning and execution. certainly no luck involved in getting the award, truly deserved!!
29 July, 07:53
![](/profiles/img/69549-161-s.jpg)
I can only agree with what those before me have written.
The honorable and precise work on this model has been deservedly appreciated. Congratulations on a well-deserved victory! 👍👍👍
29 July, 07:59
![](/profiles/img/14143-361-s.jpg)
I'm looking forward to it with you! The referees appreciated YOUR OWN performance.🙂
29 July, 08:50
![](/profiles/img/27826-126-s.jpg)
I totally agree with all mates. It is a well-deserved award and the judges have appreciated it 👍
Congrats. Enjoy it, Alec!
29 July, 17:07
![](/profiles/img/23186-383-s.jpg)
Aleši, tohle je prostě nádhera! Gongratulations to very well deserved award. I am looking forward to see final pictures.
29 July, 19:36
![](/profiles/img/23938-707-s.jpg)
Mates, thank you all for your very kind words and support, it means a lot. This build was sucking the lifeforce out of me so it's nice to see it turned out pretty good. I was amazed how much more effort a bigger model takes (I have a whole new appreciation for large scale builders). Going down the detailing rabbit hole did not help, but that's just the OCD acting up… 😄
Few finished pics are now uploaded. I am having a helluva time fitting this thing into my photo booth, so more will follow once I have time to make some modifications. Cheers!
30 July, 10:36
![](/profiles/img/46074-728-s.jpg)
Alec, great job and congratulations! In the future instead of using ridged rod for static dischargers, which can easily break off, you would be better off using brush bristles, preferably pig hair, but it depends on the scale you are doing. They are strong and flexible but keep their shape if they are touched. They are also great for antenna.
30 July, 14:12
![](/profiles/img/23938-707-s.jpg)
Thanks mates. The wire static dischargers are indeed problematic and I managed to knock them off already. Good idea with the brush bristles, thanks Skyhiker 👍
30 July, 15:57
![](/profiles/img/11761-776-s.jpg)
Alec, Beautiful work on this vintage kit. I have built two many, many moons ago during my teenage years and you have truly brought the old plastic to life. It looks like you could jump right in and fire her up. Great work. I look forward to more of your handiwork. Kind reregards. Dutch
30 July, 22:19
![](/profiles/img/23938-707-s.jpg)
Dutch, glad this brought back fond (hopefully) memories. This was a memory build for me too, although I did not get to build one back then for reasons I get into under the project's writeup. Still a very fine kit indeed.
30 July, 23:28
![](/profiles/img/11761-776-s.jpg)
I just build kits, you create masterpieces. There is a difference. But, yes, it brought back fond memories. It went together well and stayed together well. If I remember correctly, it was somewhere in the $8-10 range at my local hobby store. You have much more patience than I do.
30 July, 23:42
![](/profiles/img/45816-678-s.jpg)
Fanatic build. I really admire the work and level of detail you have added Alec. Really lovely finish and build. Top job Sir.
16 August, 06:18
![](/profiles/img/59759-384-s.jpg)
possède cet article
![1:48 P-47D Thunderbolt (Eagle Editions EagleCals EC48-106) EagleCals EC48-106](/products/img/2/2/8/275228-10105-99-t180.jpg)
P-47D Thunderbolt "The Trojan Warhorse" & "Whooo"
Eagle Editions 1:48
EagleCals EC48-106 (EC#106) 2007 Nouvel outillage 17 August, 18:05
![](/profiles/img/38375-466-s.jpg)
veut cet article
![1:48 F-4G Late Phantom II - (with DMAS) after about 1985 interior 3D decals (Quinta Studio QD48342) QD48342](/products/img/2/0/1/1481201-38473-42-t180.jpg)
F-4G Late Phantom II - (with DMAS) after about 1985 interior 3D decals for Meng
Quinta Studio 1:48
QD48342 2023 Nouvel outillage 17 August, 18:04
![](/profiles/img/35938-149-s.jpg)
a ajouté un nouvel album photo.
22 5 June, 13:13
![](/profiles/img/35938-149-s.jpg)
As usual, a full build video with all details can be found on my channel: Youtube Video
![](https://img.youtube.com/vi/nss7JcoysuQ/maxresdefault.jpg)
17 August, 18:02
![](/profiles/img/user-s.jpg)
possède cet article
![No Spray Booth Kit w/LED Lights / Exhaust Ext Hose/Turntable (HaoSheng HS-E420 DCLK) HS-E420 DCLK](/products/img/4/4/3/1187443-25462-58-t180.jpg)
Spray Booth Kit w/LED Lights / Exhaust Ext Hose/Turntable
HaoSheng
HS-E420 DCLK 17 August, 18:02
![](/profiles/img/59759-384-s.jpg)
possède cet article
![1:48 P-47 Thunderbolt detail set (Master AM-48-155) AM-48-155](/products/img/9/2/4/1218924-33840-76-t180.jpg)
P-47 Thunderbolt detail set blast tubes, gunsight and pitot tube
Master 1:48
AM-48-155 2019 Nouvelles pièces 17 August, 18:01
![](/profiles/img/57594-145-s.jpg)
a ajouté un nouvel album photo.
38 images
Aero L-39 Albatros - Eduard![View album, image #38 View album, image #38](/albums/img/9/0/2/1787902-57594-14-720.jpg)
1:72
The finished model.
Projet: Aero L-39 Albatros - Eduard
55 14 June, 06:54
![](/profiles/img/57594-145-s.jpg)
While waiting for some paints to arrive in the mail to continue my MiG-23 build project, I decided to do a very quick build of the Eduard L-39 in my stash. This kit is labeled as a "weekend" build, which might be a bit optimistic for me, but should still be a quick progress.
14 June, 07:14
![](/profiles/img/111505-470-s.jpg)
Do you already have a plan for the shades you're going to use? I found the L-39 classic camouflage very hard to get right. I hope you'll have more luck with it.
14 June, 17:32
![](/profiles/img/111505-470-s.jpg)
Thanks @Łukasz, well spotted!
MRP-010 Brown Green ČSN 2250
MRP-013 Khaki ČSN 5450
MRP-027 Light Pastel Grey ČSN 1010
For those interested
15 June, 06:17
![](/profiles/img/57594-145-s.jpg)
For the Hungarian standard camo, MRP has released an entire set, consisting of MRP-351 Brown, MRP-352 Dark Green and MRP-353 Light Blue.
18 June, 16:11
![](/profiles/img/57594-145-s.jpg)
Yesterday I spent some time comparing the hue and tint of the MRP paints with my own mix of Tamiya acrylics (as described in photo 26 above), and found them to be absolutely identical. I also found the MRP paints much too smelly and aggressive and hard to adjust if you want to blend in slightly varying tones in panels etc. The Tamiyas can furthermore be used for extremely diluted thin filter applications, while the MRP are block solid.
19 June, 06:49
![](/profiles/img/111505-470-s.jpg)
Well done on those paints!
I agree with you, Tamiya paints spray great and don't smell nearly as nasty as MRP's.
19 June, 13:22
![](/profiles/img/13641-502-s.jpg)
I see you mixed too much of this colour and used it on the background 😋
Lovely preshading, sth I don't have enough patience for
21 June, 10:31
![](/profiles/img/27826-126-s.jpg)
Very nice painting job, Thomas. Looks fantastic so far 👍
I recently saw that Edward has released the transparent parts of this kit as "L-39 Revised Canopy":
L-39 Revised Canopy (Eduard 7040Y, 1:72)
Do you know what problem the original transparent parts have?
24 July, 17:49
![](/profiles/img/57594-145-s.jpg)
Cuajete, thank you! No, I wasn't aware of any issues with the canopy. To me, the version provided in the kit is good enough, it certainly looks correct compared with photos.
24 July, 19:53
![](/profiles/img/25743-467-s.jpg)
I'm not sure, but the kit photos show onle the multi part canopy. The revised Canopy kit also has a single peace closed version.
25 July, 04:27
![](/profiles/img/57594-145-s.jpg)
Nicolas, yes, you are right. With the new set you also get a closed canopy so the builder doesn't have to join the separate pieces together. I guess it makes for a simpler build.
25 July, 06:07
![](/profiles/img/25743-467-s.jpg)
@ Cuajete: I tried it direktly from Thomas' albums. There it works, but ther is a notice that comments are disabled.
26 July, 18:00
![](/profiles/img/87527-778-s.jpg)
Very nice! This build reminds me that I started a similar kit more thas ten years ago, with a Czech camo and some decals already applied...Now It's om the "shelf od doom" ...Maybe something I'll retake it!
27 July, 20:07
![](/profiles/img/57594-145-s.jpg)
And with a little effort, the project is pushed over the finishing line. Photos will come soon!
17 August, 16:10
![](/profiles/img/user-s.jpg)
veut cet article
![1:24 Time machine from Back to the Future part I (Aoshima 064368) 064368](/products/img/5/4/1/1483541-27767-76-t180.jpg)
Back to the Future
Time machine from Back to the Future part IAoshima 1:24
064368 (BT-01) 2024 Nouvel outillage 17 August, 17:58
![](/profiles/img/user-s.jpg)
Good afternoon, I am interested in this model, so I wanted to ask you, do you ship to Serbia and how much is the postage? Best regards, Vladica Jović.
4 June, 15:43
![](/profiles/img/11761-776-s.jpg)
Vladica, I found the kit in my stash. I will package it tonight and calculate a postal estimate to Serbia for you. Kind regards, Dutch
8 July, 12:31
![](/profiles/img/user-s.jpg)
Let me know how much the postage would cost to Serbia, so I can see if I can afford it. Best regards, Vladica Jović.
8 July, 16:39
![](/profiles/img/11761-776-s.jpg)
Vladica,
I packaged the kit as lightly and securely as possible, but the shipping estimate to Serbia is $35.60. Your total would be $50 USD. If you want it, please send my your complete name, shipping address and email address for the Customs form. Kind regards, Dutch
8 July, 22:09
![](/profiles/img/user-s.jpg)
Thanks for the info. Sorry, but that's a bit much for me. Tell me how much it would cost to ship that model to Chicago? I have a relative there, so I could ask him to send to his address. Best regards, Vladica Jović.
8 July, 22:31
![](/profiles/img/user-s.jpg)
Okay, I'll contact my brother in Chicago today, to see if he's on vacation by chance and to agree on shipping. Please send me your Paypal account and your email address so that we can pay you and send you the address in Chicago. I will contact you as soon as I hear from my brother. Best regards, Vladica Jović.
9 July, 07:15
![](/profiles/img/11761-776-s.jpg)
Vladica, Can we possibly trade? I know of a vendor in Serbia who sells UpRise decals. Can you purchase UpRise1:72 Douglas A-4E/F Skyhawk Stencils - UR72176 in Serbia? You could just mail them in an envelope with a stamp to me. If I mail the Mirage to Chicago = 2 UR72176. If I mail the Mirage to Serbia = 3 UR72176. you think that is a fair trade, please let me know. Kind regards, Dutch
9 July, 12:06
![](/profiles/img/user-s.jpg)
In principle, it can. I'll stop by the Post Office afterwards to check how much the postage costs and I'll call the decal seller to ask if he has three in stock. I will contact you when I check it. Best regards, Vladica Jović.
9 July, 13:51
![](/profiles/img/user-s.jpg)
So I will buy you the 3 pcs of decals you asked for and send them to you, and you will send me Mirages to Serbia. I don't have to pay you anything. We will do so. Best regards.
9 July, 13:55
![](/profiles/img/11761-776-s.jpg)
Vladica, Please give my your full name, address and email (for customs form). Kind regards, Dutch
Paul Wiegman
2615 S. Hawthorne Circle
Tampa, FL 33629
USA
email: vertol-107@hotmail.com
9 July, 13:58
![](/profiles/img/user-s.jpg)
My adress Is :
Vladica Jović
XI Krajiške divizije 41/37
11090 Beograd
Srbija
Telephone: +38163342511
E-mail: jovac6421@gmail.com
9 July, 14:29
![](/profiles/img/user-s.jpg)
I just sent an inquiry to the dealer for the decals. I'm waiting for an answer. Best regards.
9 July, 14:30
![](/profiles/img/user-s.jpg)
I would just take a look at your decal offer tonight, maybe you have something I need, so I would pay you to send it all together, if I find something interesting.
9 July, 14:32
![](/profiles/img/user-s.jpg)
I just got a call from this man who sells decals. There is currently only one set in stock.
9 July, 15:03
![](/profiles/img/user-s.jpg)
He still doesn't know when he will get two more sets of those decals. What do you suggest ? Best regards.
9 July, 16:31
![](/profiles/img/11761-776-s.jpg)
Vladica,
I see the other two MIrage decals that you want. I can add those to the package. I can substitute the following UpRise decals:
(1) YF-23 Black Widow II, UpRise 1:144, UR144200;
(1) RA-5C Vigilante (RVAH-11) UpRise 1:144 UR14425;
(1) Boeing 707 KAL "First shooted" UpRise 1:144 URC14413
Or, if he carries CtA decals, then you could ask for:
(2) Boeing KC-135T Stratotanker Tail painted for a 100th anniversary 116th ARS, CtA Models (cut then add) 1:144 144073
Does that sound fair?
Kind regards,
Dutch
9 July, 17:46
![](/profiles/img/user-s.jpg)
So you want the following decals:
UpRise1:72 Douglas A-4E/F Skyhawk Stencils - UR72176
(1) YF-23 Black Widow II, UpRise 1:144, UR144200;
(1) RA-5C Vigilante (RVAH-11) UpRise 1:144 UR14425;
(1) Boeing 707 KAL "First shot" UpRise 1:144 URC14413
9 July, 18:08
![](/profiles/img/user-s.jpg)
Hello Friend ,
For me, you pack the following:
1. Mirage III Revell H-225
2, Israeli pre-1967 Aircraft & Helicopters
Mirage IIICJ, P-51D, Spitfire, Bell 205/206, S-58, Mosquito
Microscale | No. 72-105 | 1:72
3. Mirage - Part 02
Brazil, Venezuela & Egypt
FCM | No. 72-34 | 1:72
I would buy that, and I'll send you the decals. Is that possible? Best regards.
9 July, 18:13
![](/profiles/img/user-s.jpg)
Hello Friend ,
For me, you pack the following:
1. Mirage III Revell H-225
2, Israeli pre-1967 Aircraft & Helicopters
Mirage IIICJ, P-51D, Spitfire, Bell 205/206, S-58, Mosquito
Microscale | No. 72-105 | 1:72
3. Mirage - Part 02
Brazil, Venezuela & Egypt
FCM | No. 72-34 | 1:72
I would buy that, and I'll send you the decals. Is that possible? Best regards.
9 July, 18:50
![](/profiles/img/11761-776-s.jpg)
Hello Vladica,
I returned home early. I have located the two decals that you want and included them with the Mirage kit. I will mail the package tomorrow. You can send the UpRise and CtA decals when you get them all together. No hurry. Kind regards, Dutch
18 July, 21:43
![](/profiles/img/user-s.jpg)
Thank you very much. As soon as the seller informs me that the decals are ready for you, I will send them to you immediately. Best regards, Vladica Jović.
19 July, 06:27
![](/profiles/img/user-s.jpg)
Thank you for sending the package. As soon as they contact me that they have arrived, I will immediately go to Pančevo to pick them up and send them to you. Trust me, it's not up to me. I will contact you when I receive your shipment. Best regards, Vladica Jović.
19 July, 20:21
![](/profiles/img/user-s.jpg)
Good day, I just wanted to let you know that the decals I ordered for you will arrive at the end of next week at my friend's place because I'm going on vacation next week, so I won't be in Belgrade. My friend will pick up the decals and I'll send them to you as soon as I get back from vacation. Best regards, Vladica Jović.
1 August, 07:15
![](/profiles/img/user-s.jpg)
Good day Paul, just to let you know that I sent those decals for you today. The shipment number is: RR232353455RS. Let me know when it arrives. Greetings, Vladica Jović.
17 August, 12:29
![](/profiles/img/11761-776-s.jpg)
Vladica, I noticed that I have several items on your wish list. I need to reduce my stash and I propose to send you the items and will set a value much less than the price I have set on SCM, but perhaps including postage. In any case, a very good deal for you. Then you can send me more UpRise and CtA, & possibly CRM kits / decals later. Does this sound okay to you? Kind regards, Dutch
17 August, 17:57
![](/profiles/img/126902-907-s.jpg)
a ajouté un nouvel album photo.
17 images
Panerkampfwagen IV Ausf. H![View album, image #1 View album, image #1](/albums/img/1/1/0/1586110-126902-46-720.jpg)
1:35
I wasn‘t sure how well those ejector pin marks would be covered once the tracks were installed, so to be on the save sid...
Projet: Panzerkampfwagen IV Ausf. H
17 31 October 2023, 12:56
![](/profiles/img/126902-907-s.jpg)
@Spanjaard thank you, I hope to achieve some nice rust variations at those dented spots
28 January, 21:26
![](/profiles/img/40854-198-s.jpg)
possède cet article
17 August, 13:17
![](/profiles/img/104971-309-s.png)
MK Hi .
I am interesting for the 1/32 RF-4E Phantom you have for sale .Is it available ,and in what condition ?
Thank you !
17 August, 13:39
![](/profiles/img/40854-198-s.jpg)
Hi John,
the Phantom is still available. The Kit is complete and all parts are still in the sealed bags. Decals are good for their age. Only the box is a little bruised. If you send me your email, I could send you detailed pictures of everything.
greetings from Germany
17 August, 15:43
![](/profiles/img/104971-309-s.png)
Hi MK,
Perfect !!
I am ok for the decals and the condition of the box .
My email is rigopoulosjohn@yahoo.com
Thank you for all!
Greetings from Greece
17 August, 17:10
/fr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=fr
35
35
/fr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo