Fil d'information
Micky
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
18 images
HARRIER GR.3 IN MALVINASNouveau: 5 November, 01:33 1:72
Done!
Projet: HARRIER GR.3 IN MALVINAS
20 29 July, 17:03
David Taylor
Only thing I would add are that the wing inspection panels are a darker sea grey due to panels being sealed against sea water ingress.
Only thing I would add are that the wing inspection panels are a darker sea grey due to panels being sealed against sea water ingress.
5 November, 19:36
Daniel Olson
veut cet article
veut cet article
Akagi Bridge w/ Flight Deck A6M2 Zero Fighter w/ Interior of the Engine and Weapons
Border Model 1:35
BSF-002 2024 Nouvelles pièces Multi sujets (2)5 November, 19:36
Jean-Louis Durand
veut cet article
veut cet article
Russian-Ukrainian War Series
Buggy Mongoose The Ukranian Combat Vehicle, Basic Version Master Box (MB) 1:35
MB35239 2024 Nouvel outillage 5 November, 19:35
Jean-Louis Durand
veut cet article
veut cet article
Russian-Ukrainian War Series
Buggy Mongoose The Ukranian Battlefield Evacuation Vehicle Master Box (MB) 1:35
MB35240 2024 Nouvelles pièces 5 November, 19:35
Jean-Louis Durand
veut cet article
veut cet article
Operation Nimrod 5th May 1980 Scenary & 5 figures
Mitches Military Models 75mm
None 2024 Nouvel outillage 5 November, 19:35
J8501254
veut cet article
veut cet article
Orions and More P-3C, EP-3E, SU-15, EA-7L, C-119L, A-10A, F-16C
Wolfpak Decals 1:72
72-006 201x Nouvel outillage Multi sujets (6)5 November, 19:34
Ben M
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
32 images
Royal Thai Air Force F8F-2 BearcatNouveau: 4 November, 20:53 1:48
Projet: Royal Thai Air Force F8F Bearcat
38 15 September, 20:10
Snake Plissken
Is it similar to a commemorative edition or just meant to replicate natural metal finish?
Is it similar to a commemorative edition or just meant to replicate natural metal finish?
20 September, 20:05
Ben M
It's aluminum plated to represent the actual nmf finish. I built a t-33 where I had some issues that I hope to improve upon.
It's aluminum plated to represent the actual nmf finish. I built a t-33 where I had some issues that I hope to improve upon.
21 September, 04:29
Ben M
Did a lot of sanding areas that will be glued, masking, fitting parts to each other, and basic assembly while I'm on vacation. I got new decals from Siam decals as the originals are from 1968 and not in good shape. I'm not sure how old the Siam decals are but they are newer than '68. One thing that is apparent is the stripey tail decal doesn't fit at all. This is going to be a good challenge to resolve.
Did a lot of sanding areas that will be glued, masking, fitting parts to each other, and basic assembly while I'm on vacation. I got new decals from Siam decals as the originals are from 1968 and not in good shape. I'm not sure how old the Siam decals are but they are newer than '68. One thing that is apparent is the stripey tail decal doesn't fit at all. This is going to be a good challenge to resolve.
21 September, 23:57
Ben M
Decided to try to apply the 1960s decal for the cockpit, as I don't have an alternative. Had to soak it for about a minute in hot water to get it to release. As is typical for hawk kits the decal isn't the right size but you go to war with the decals you have. I got it to apply without shattering. Unsure if it will stick, very old decals like this often have to be glued in place.
Decided to try to apply the 1960s decal for the cockpit, as I don't have an alternative. Had to soak it for about a minute in hot water to get it to release. As is typical for hawk kits the decal isn't the right size but you go to war with the decals you have. I got it to apply without shattering. Unsure if it will stick, very old decals like this often have to be glued in place.
6 October, 15:19
Ben M
I think the Siam Scale decals I'm using instead of the originals are about 20 years old but they're going on ok. A little thick, so not settling down into panel lines but I'll try some decal fluid once they set in place, hopefully they will on the aluminum surface! The roundels are two part so I will have to do a second layer…
I think the Siam Scale decals I'm using instead of the originals are about 20 years old but they're going on ok. A little thick, so not settling down into panel lines but I'll try some decal fluid once they set in place, hopefully they will on the aluminum surface! The roundels are two part so I will have to do a second layer…
26 October, 22:30
Mr D
Smart little model.... unusual in the factory chrome 👍👍
Nice classic kit.
Bit of heat of hairdryer works with thick decals.... nice n steady.
Like it 😁👍
Smart little model.... unusual in the factory chrome 👍👍
Nice classic kit.
Bit of heat of hairdryer works with thick decals.... nice n steady.
Like it 😁👍
27 October, 15:36
Ben M
That's a good idea, I may give it a try. First I'm going to upgrade from micro sol to mark fit.
That's a good idea, I may give it a try. First I'm going to upgrade from micro sol to mark fit.
27 October, 15:56
Mr D
I use Mark fit ....but recently found the Vallejo one works amazing... Just used it on my in progress IAR-80.
Definitely my go to now.
The moon ships is great 👍👍
I use Mark fit ....but recently found the Vallejo one works amazing... Just used it on my in progress IAR-80.
Definitely my go to now.
The moon ships is great 👍👍
27 October, 16:15
Ben M
An interesting detail I note while decaling. The panel lines on the fuselage are engraved. The panel lines on the wings are raised. Wtf.
An interesting detail I note while decaling. The panel lines on the fuselage are engraved. The panel lines on the wings are raised. Wtf.
28 October, 01:52
Desert Marlin
I've been using Mr. Mark Softener and Mr. Mark Setter. They worked well on some Kitty Hawk decals which are pretty stubborn...
I've been using Mr. Mark Softener and Mr. Mark Setter. They worked well on some Kitty Hawk decals which are pretty stubborn...
28 October, 04:19
Ben M
The tamiya mark fit and some work with a needle solved the problems! Thanks for all the great ideas everyone. Onwards!
The tamiya mark fit and some work with a needle solved the problems! Thanks for all the great ideas everyone. Onwards!
28 October, 16:13
Ben M
Did a bunch of cut the decals into pieces to fit a different model than they were made for. Came out fairly well. Subassemblies are getting larger as the project comes together.
Did a bunch of cut the decals into pieces to fit a different model than they were made for. Came out fairly well. Subassemblies are getting larger as the project comes together.
3 November, 03:49
Mr D
It's looking really good 👍
It's great that the kits can still be built after all these years.
The people in the factory's would have never believed the model they are packing wouldn't be built until 2024 🤔🤣.
Nice build to follow 😃
It's looking really good 👍
It's great that the kits can still be built after all these years.
The people in the factory's would have never believed the model they are packing wouldn't be built until 2024 🤔🤣.
Nice build to follow 😃
3 November, 21:52
Ben M
Almost complete. Popped the main fuselage seam a bit 🙁 I had gone to a lot of work to hide it. For some reason even after carefully scraping the mating surfaces I just don't get good adhesion. Maybe next time I will try only using CA for assembly on my next plated kit.
Almost complete. Popped the main fuselage seam a bit 🙁 I had gone to a lot of work to hide it. For some reason even after carefully scraping the mating surfaces I just don't get good adhesion. Maybe next time I will try only using CA for assembly on my next plated kit.
3 November, 22:06
Ben M
The decal sheet says 23rd squadron Kohkratiem AFB, but there's not much on the internets. Possibly a misspelling? The Royal Thai Air Force had F8F's from 1951 to 1963.
Thanks to Siam Scale for the decals, without which this project would be hopeless. The sheet number is 48003 if that helps anyone.
The decal sheet says 23rd squadron Kohkratiem AFB, but there's not much on the internets. Possibly a misspelling? The Royal Thai Air Force had F8F's from 1951 to 1963.
Thanks to Siam Scale for the decals, without which this project would be hopeless. The sheet number is 48003 if that helps anyone.
3 November, 23:15
Desert Marlin
Looks great so far! Don't worry about the seam. It can be filled and perhaps painted, even though it's plated.
Looks great so far! Don't worry about the seam. It can be filled and perhaps painted, even though it's plated.
4 November, 03:45
Ben M
Complete! @desert marlin - I decided the seam on the bottom wasn't important enough to do a bunch of rework. It's an old 60's "chrome" plated model after all 🙂 I think it came out looking pretty good overall.
Complete! @desert marlin - I decided the seam on the bottom wasn't important enough to do a bunch of rework. It's an old 60's "chrome" plated model after all 🙂 I think it came out looking pretty good overall.
4 November, 20:54
Mr D
Fantastic, Really nice kit , Looks 👍 great.
Sometimes it's nice for a vintage kit to look close to how it would be built originally.... Nostalgic.
Nice find....
Fantastic, Really nice kit , Looks 👍 great.
Sometimes it's nice for a vintage kit to look close to how it would be built originally.... Nostalgic.
Nice find....
4 November, 21:08
Ben M
I have one more plated kit in my stash. Kind of tempted to get it out and keep going…
I have one more plated kit in my stash. Kind of tempted to get it out and keep going…
5 November, 02:30
Elshan Mammadov
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
72 31 August 2021, 12:21
Juskifo
Wow all these tones of paintings I thought before I saw that it was on a scale of 1/35
Wow all these tones of paintings I thought before I saw that it was on a scale of 1/35
18 September 2021, 06:34
Robert Podkoński
Is it really in 1/72nd scale or you have produced such a big match? LOL 😉 Absolutely fantastic!
Is it really in 1/72nd scale or you have produced such a big match? LOL 😉 Absolutely fantastic!
18 September 2021, 15:41
Elshan Mammadov
Yeah, the most difficult was to build the match!😉Thank you all friends for your kind words!
Yeah, the most difficult was to build the match!😉Thank you all friends for your kind words!
18 September 2021, 16:39
Jennifer Franklin
Another older build that Mr. James has dug up is gorgeous. Thank you for shining a light on this one.
Another older build that Mr. James has dug up is gorgeous. Thank you for shining a light on this one.
31 May 2023, 02:15
Dave Smith
Have this in my stash would be interested in which colours you painted. Will give me some ideas to come away from desert scheme.
Have this in my stash would be interested in which colours you painted. Will give me some ideas to come away from desert scheme.
6 June 2023, 16:26
Rui
You're a wizard with the weathering and a magician with the camera, my friend. 👍
You're a wizard with the weathering and a magician with the camera, my friend. 👍
12 February, 04:58
Elshan Mammadov
Thank you mates! Very glad you like it and nice to hear good comments from such specialist in this scale as Zsolt.
Thank you mates! Very glad you like it and nice to hear good comments from such specialist in this scale as Zsolt.
13 February, 06:49
CaptGPF
Whoa! That paint job just makes at model pop! The weathering is unique, rather than just crabbing up the model, it actually accentuates the camo colors. VERY VERY VERY WELL DONE!!!!!
Whoa! That paint job just makes at model pop! The weathering is unique, rather than just crabbing up the model, it actually accentuates the camo colors. VERY VERY VERY WELL DONE!!!!!
14 February, 05:37
Simon Nagorsnik
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
1 images
1:72 1:72
W.I.P.
I couldn't resist....;)
A teaser was needed...:D
Projet: 1:72 Armoured Willys MB Jeep
17 24 October, 16:11
Simon Nagorsnik
Ha! You´re all welcome mates!
Put on your warm clothes, it's getting even colder... 🥶😂
Thank xou!
Ha! You´re all welcome mates!
Put on your warm clothes, it's getting even colder... 🥶😂
Thank xou!
27 October, 20:31
/fr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=fr
35
35
/fr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo