Fil d'information

Skyhiker
For a relatively new kit I am surprised on how much flash and fitting issues this kit has.

Skyhiker
It's really hard for me to fight off the urge to correct the structural issues with this kit. But I promised myself I would make this one out of the box.

Patrick Hagelstein
I've seen that promise before Skyhiker! 😂 Good luck keeping this one OOB! 😉👍🏼

Skyhiker
I really hate Revell conopys.

Sergio Ordonez
Mate, I think you should put the windshield uspside down. The ángel does not cope with the real one as I see on photographs.

Skyhiker
Unfortunately it looks even worse the other way around. The idiot engineers at Revell should be fired.

Sergio Ordonez
Well, I had some work with French engineers and I know shit happens. Could you take a photo with this one in the other position?

Sergio Ordonez
drive.google.com/fil..J9/view?usp=drivesdk
The windshield is not an isoscelles triangle so the windshield has not a 45 degree ángel over the capot. Please, see these example of a TA-152 (and please, mind It is 35 years old and I was only 13 when I drestroyed It).
I think an easy solution can be made. I do not want any mate to be anoyed by an engineering issue. I had them everyday (it's my job, Factory engineering problem solving, known as 'shit managing") and It can destroy your mojo.

Ben M
What a terrible canopy

Skyhiker
After several hours of sculpting I got the canopy to fit better. I will continue with it tomorrow.

Sergio Ordonez
Your mojo works, mate! Now you have became a great problem solver!
On the other hand, I think another 3D engineering guy needs to stop drinking and 20 years of 2D drafting. The fitting is worse than I could imagine. But I see is no a problem for a seasoned mate like you. Great work, mate!

Nicolas
Following. I build this kit several times in older versions. The fit of the canopy is realy sh*t. My solution was (with about 10 years) to sand the backside of the windshild till it fitted. Of corse so most of the frame is missing.

Thomas Kolb
What a struggle! It reminds me of some Heller and Amodel kits. But it looks that you manage to coax it into shape!

J35J
Great effort and progress! 👍🏻

Skyhiker
Sergio the TA 152 had a very different canopy than the 190. The 152 was designed for high altitude flying, was pressurized and had double panes.

Sergio Ordonez
Thanks you, Skyhiker: I think I can remember now, as I researched about FW190 and TA152 black in the 90's. Also, canopy is bubble-shapped. Sorry, my FW190 Mustang have been gone forever, I expent the night trying to find It, just to find my solution, but I think only the reta of the TA152 has survived.

Mr D
You done a better job of the seat belts than l did 🤣. The cockpit glass on my model was not very clear!
Looking good, ... Thanks for uploading 👍👍👍

Skyhiker
Mr D did you also have so much trouble with the canopy? I read in the kit review at the bottom of the page that it was bad. I really wish the reviews would be moved up because I always forget about them. It took me quite a while to get the canopy to work. It needed a lot of reshaping to look right.

Skyhiker
I decided to make my own blueprint for this plane. So, that's taking up a lot of my time at the moment.

Mr D
Hi, yes l had trouble too, l did a dry fit before paint, and l had to take a combination off the glass n some off fuselage, and had to use a bit of UV clear resin.
I got it to fit in the end, but it's not very clear to see through.
I had a bit missing of my engine fan too, had to make it up with super glue gell.

Alexander Grivonev
Built one too back in the day, the nightfighter version. Speaking of the canopy, I like how the rear part of it is just molded to the fuselage 😄. Used some other canopy I found in my spares because the one from the kit was entirely unusable.

Mr D
Looking good 👍👍
It's a nice model when it's finished once you sort the shortcomings out.
I did get my prop to spin in the end....had to do alot of work to the cooling fan to make it run smoothly.
Good luck on next steps 😃👍

Skyhiker
If I had thought it would have been a problem I would have dry fitted everything first. But I wanted to keep the parts on the sprue for painting. It wasn't worth messing up the paint job just to get the propeller to spin. Especially since the contact points were so fragile. So in the end I glued it together so it will be stable.

Skyhiker
Working out the fuselage patterns today.

Mr D
Looks good 👍👍

Guy Rump
Looking good. 👍

Mr D
Nice to compare the two.
👍

Skyhiker
I got the legs and nose on and painted the exhaust today.

Villiers de Vos
Very nice progress. Phenomenal paint work.

Skyhiker
I got the decals on today.

Mr D
Nicely done.....looks good now 👌👍👍
You managed to get a correct decal for the tail.... Better.
You got it very close to box art.

Skyhiker
Thanks Mr D.

Mr D
On the fiddly bits... Did you decide to make your own part for that Whip shaped thingy🤣 don't know what it actually is 🫣.... ?
Quite a few little fragile bits on the bottom... I was extremely cutting n sanding these.
Like the way the guns are visible through wheel well's👍

Skyhiker
Mr D, the Morane antenna I built by filing down a wooden toothpick and super gluing a hog's hair on to it that I got from a cheap brush. The kit part was ridiculously out of scale. I use this hog's hair method for whip antennas and static dischargers because the hair is flexible enough that it won't break off.

Mr D
AHH thanks it's Antenna 👍 be better with bit of flexibility... looks more accurate to photos as well.
I noticed HB do a Ta-152 kit....looks quite good for price.. bit of PE in kit.
I was tempted.....but promised myself l will build one buy one 🙄🤣.

Skyhiker
Lol. I promised myself the same thing and the next week someone offered me their entire stash of 45 kits for super cheap, which I bought immediately.

Mr D
🤣... Keep you out of trouble for a while.

Ben M
…. Goes to look at SH's stash …

Zbynek Honzik
Very nice! 👍

F-104
Thanks Zbynek 😊

gorby
Fantastic work on the camo!

F-104
Thank you gorby, I appreciate your feedback 👍

John Kristoffersen
Ohhh - supernice Eagle. Stunning paint and decal job! Seems like the old Hase kit still is par with GWH.

Gary Victory
That's really nice. You really do have to love the JASDF paint jobs. Fantastic work and finish.

Neuling
Excellent work!

F-104
Hi John, Gary and Neuling, thanks for your nice feedback, I appreciate it.

Michael Kohl
Nice livery. Suits the F-15 well.

F-104
Thanks Michael, the digital camouflage looks great on the F-15J.

Nathan Dempsey
Wow, that's beautiful. Love that digital!

Ben M
👀

Nathan Dempsey
Welcome Ben!

Work has started. Drilled holes in the lower wing for hardpoints and centerline fuel tank. Cockpit is nearly complete with photos soon since it will be nearly invisible once installed.

Nathan Dempsey
Added a shot of last night's work. The cockpit was installed and I'm ready to join the fuselage halves. The wheel well construction was also completed along with some paint work there.

James C
Off to a great start 👀 👍

Thomas Bischoff
I'm in - have Hobbyboss Bearcat waiting to be built.

Robert Podkoński
Watching with pleasure 🙂

Nathan Dempsey
Thanks James, Thomas & Robert!

Assembly continues with no issues at all.

Villiers de Vos
Coming along nicely.

Nathan Dempsey
Thanks Villiers!
Well I had to go and say "no issues at all" out loud… Funny that the cowling fit perfectly during dry fitting but once glue was applied a bit of sanding was needed to make it fit right. Also I painted the inside of the cowl Yellow Zinc Chromate even though the instructions barely mention anything other than the cowl and prop magically there on the last step.

Guy Rump
Looking good, following. 👍

Nathan Dempsey
Thanks Guy! Welcome aboard 🙂

Major assembly is complete. Time for painting to begin.

Nathan Dempsey
Spent most of the morning sealing up the wheel wells and cockpit with tissue paper in preparation for primer and the initial color: AK Xtreme Aluminum.

Ben M
You could have just started with the Hawk plated kit 😂 I'm thinking of trying chipping fluid on the prop but I will need to prime at least under the yellow tips.

Nathan Dempsey
That certainly would have cut a step out! I'm going to use the old hairspray method since I don't want to wait a week for chipping fluid.

Nathan Dempsey
Aluminum applied today. A little splotchy but luckily it's just an undercoat for chipping.

Nathan Dempsey
Much painting last night and today: I applied the hair-spray then the Dark Sea Blue & now the chipping begins.

Mr D
Very nice 👍 yes they had thin paint and lots of wear n tear during use.
Coming along well.

Villiers de Vos
Very nice chipping effects.

Mark Sherwood
I concur with Villers. Looks well beaten up. 🤘🥸👍

Lex Jassies
Photo 3: that's not cheating....that's making the most of your model 😉. Nice progress by the way 👍

Nathan Dempsey
Thanks mates for your kind comments! All work has halted due to hurricane preparations.

Mr James
Extreme wear indeed. Maybe they didnt use etching primer back in the black and white days 🙂. You've done an excellent job of it. If this effect can be achieved with the old trusted hairspray method, why would one buy the chipping fluid. Maybe there are advantages I'm unaware of.

Mr D
Not a bad little kit, looks quite robust and not to complicated. The cockpit was definitely worth getting, was it easy to find ??
Looking good 👍👍👍

Nathan Dempsey
Mr James: The hairspray has an added bonus in that one can will last for MANY projects.

Mr D: The kit is available under the Academy boxing I believe. As for the cockpit I believe it is still easy enough to find online.

Nathan Dempsey
Today I added the landing gear and the drop tank. The drop tank is not seen much in my photos, but I thought it looked nice. Decals are also done, so now it comes down to more weathering and exhaust stains.

Nathan Dempsey
Added a shot of the continuing weathering. Today I added the radio antenna wire. The last step is painting and weathering the bombs.

Nathan Dempsey
Calling this one complete. Final photos added.

Thomas Bischoff
well worn, well weatherd, well done 👍

John
Love the wear-n-tear, nice job Nathan!

Mr D
Great job,👌
Nice model, and realistically battle worn.
Well done... come out nice 👍👍

Villiers de Vos
Very nicely done.

Robert Podkoński
Fantastic job, Nathan! Looks great!

Neuling
Very well done! 👍

Guy Rump
Great job! 👍

Marcel Klemmer
Very nice job 👍

Mark Sherwood
Top notch. 🤘🥸🤟

J35J
Excellent!👍🏻

Nathan Dempsey
Thank you mates for all the kind comments! I'm motivated for the next project.

Dutch
Nathan, beuatiful work on this iconic aircraft. I love the weathering and paint chipping / fading. Truly authentic. Well done sir! Can't wait to see what's next.

Nathan Dempsey
Thanks Dutch! This was a fun little build. The next official project is the Mirage 2000, although I always have others going on the side lol!

Mark Sherwood
👍🥸👍

Nathan Dempsey
Thanks Mark 🙂

Pietro De Angelis
Beautiful!

Nathan Dempsey
Thanks Pietro!