Fil d'information
![](/profiles/img/10148-258-s.jpg)
a ajouté un nouvel album photo.
32 9 August, 07:14
![](/profiles/img/10148-258-s.jpg)
In view of the start of this build, I was tempted by the following motto: "From ugly duckling to swan": the kit offers a number of interesting challenges, but gives an idea of the potential both as a model and as a representation of a true aircraft beauty! I will try my best to make the swan appear....
A first challenge: roughly moulded parts, poor fit and a wing that wants too much in a positive V-position.... A second challenge will follow in the form of a Vacu canopy that has turned yellow with age; this will give me the opportunity to try out the doing in Vac-canopy myself. More of that next time...
9 August, 07:18
![](/profiles/img/user-s.jpg)
Nice aircraft !
One was used in the last phase of the New Guinea gold rush in the 30's...
Good luck !
@+
9 August, 11:50
![](/profiles/img/27826-126-s.jpg)
Great, Roland!
I would like to see the steps you follow when making the Vac-canopy.
9 August, 17:52
![](/profiles/img/10148-258-s.jpg)
Thank you for your interest, I appreciate it!
Cuajete, I'd be happy to show you a few photos of the progress of the construction and application of the self-moulded Vac canopy. It seems to have produced a reasonable result so far....
10 August, 17:25
![](/profiles/img/14213-529-s.jpg)
An unusual subject Roland! No doubt you will end up with a fantastic result
10 August, 17:34
![](/profiles/img/27826-126-s.jpg)
Many thanks, Roland!
Great job with the putty party and vacuum canopy 👍
What thermoformer did you use?
10 August, 18:22
![](/profiles/img/57594-145-s.jpg)
This look like an intriguing project, but she's definitely a putty queen! I am super impressed with the vac-forming!
10 August, 19:02
![](/profiles/img/10148-258-s.jpg)
Thank you very much for the answers, mates! I'll show you a few new pictures from today: the surfaces have been reworked with 2000 grit sandpaper (even if it may not look like it, dusty as the "duckling" still is) to prepare it for a first coat of paint. This will certainly show the need for correction! 🙂
11 August, 09:28
![](/profiles/img/10148-258-s.jpg)
New pictures of the current state of construction: the 'Baby Clipper' still looks very dark, but in the next step it will get an 'Azur' blue underside, which will be completed by 'Middle Stone' and 'Dark Earth' on the upper sides. Since prototype photos already show this machine with heavy signs of use and weathering, I will endeavour to achieve a similar look here.
14 August, 09:26
![](/profiles/img/10148-258-s.jpg)
The 'Baby Clipper' has lost some of its elegance with all the rods and struts, but has gained in authenticity. A certain amount of effort is required to reconstruct the entire antenna equipment - not exactly a small amount - but also the structurally necessary struts: the kit manufacturer Azur does not provide any information here, let alone that it would put material for this in the box. The entire superstructure at the top of the engine nacelle is the result of own research. Everything was made from wire, cable insulation (exhaust pipes) and MG muzzles joined together (pitot tubes). The floats under the wings are braced with super-fine steel wire, which, by the way, is a very versatile material. The instructions also make no reference to the tailplane struts, which were also made by the builder.
However, most of the work has gone into the undercarriage! This was, to summarise, so heavily modified that it can actually be described as newly constructed from etched parts and wire from the leftover box.
So, I've already written a lot, but there's one more point: I'm particularly curious to see how my first self-built Vacu canopy performs on this project. I'm a bit anxious, but also very excited to see what the unmasking that will soon follow will show!
24 August, 06:52
![](/profiles/img/27826-126-s.jpg)
I agree with Marko.
A challenge with great resolution. Great job so far, Roland. And very nice painting job 👍
24 August, 18:01
![](/profiles/img/10148-258-s.jpg)
Thank you for these motivating words, quite appreciated!! On now to the final act of this project...
25 August, 10:23
![](/profiles/img/57594-145-s.jpg)
I agree with all comments above. I must say, I like way you attached the wires and struts - usually there is a bit of a lump of superglue where they attach to the fuselage, but you managed to make the connection points very neat.
25 August, 10:53
![](/profiles/img/10148-258-s.jpg)
Thanks mates for all the motivating responses! Thomas, I try to solve the problem of gluing in wires by always drilling holes at both ends, into which I then 'clamp' the wire that has been cut off a little too long. Before gluing, I let some glue into the opening via a wire tip and then insert the wire within the time that the glue remains liquid. This usually works more or less well, I'm glad you like it.
25 August, 14:16
![](/profiles/img/10148-258-s.jpg)
From ugly duckling to..... well, the Fairchild F.91 is now finished! I am pleased to be able to present it to you - also because it was not an easy build in some parts. One of the new features is the use of a deep-drawn cockpit canopy for the first time, as you can see in this build report. Incidentally, the windows on the fuselage are not from the kit, but clear film cut as accurately as possible - at least it looks better.
Thank you for your interest and your comments, mates!
26 August, 16:37
![](/profiles/img/31953-375-s.jpg)
veut cet article
![1:144 Me 323 E-2 "Gigant" (Great Wall Hobby L1007) L1007](/products/img/6/7/0/1252670-12155-75-t180.jpg)
Me 323 E-2 "Gigant" Luftwaffe Transporter w/Sd.Kfz. 250 & Panzer II Ausf. F
Great Wall Hobby (GWH) 1:144
L1007 2019 Nouvelles pièces Multi sujets (3)26 August, 17:07
![](/profiles/img/96769-554-s.jpg)
possède cet article
![1:35 Jagdpanzer 38(t) Hetzer Early Production (Takom 2170X) 2170X](/products/img/4/2/7/1506427-23426-77-t180.jpg)
Jagdpanzer 38(t) Hetzer Early Production Limited Edition (Without Interior)
Takom 1:35
2170X 2023 Nouvelles pièces 26 August, 17:06
![](/profiles/img/96769-554-s.jpg)
possède cet article
![1:35 King Tiger (Meng Model TS-031) TS-031](/products/img/0/6/3/1008063-37308-54-t180.jpg)
German Heavy Tank Sd.Kfz.182
King Tiger (Henschel Turret) Meng Model 1:35
TS-031 2017 Nouvel outillage 26 August, 17:05
![](/profiles/img/96769-554-s.jpg)
possède cet article
![1:35 King Tiger (Meng Model TS-031) TS-031](/products/img/0/6/3/1008063-37308-54-t180.jpg)
German Heavy Tank Sd.Kfz.182
King Tiger (Henschel Turret) Meng Model 1:35
TS-031 2017 Nouvel outillage 26 August, 17:05
![](/profiles/img/user-s.jpg)
a ajouté un nouvel album photo.
25 images
Tamiya Gama Goat![View album, image #20 View album, image #20](/albums/img/5/8/5/1792585-26091-73-720.jpg)
1:35
Tyres not yet painted, but just had to see how it all looks on its wheels.
Projet: M561 GAMA GOAT
9 3 August, 17:16
![](/profiles/img/user-s.jpg)
Welcome, Sergio. This one will be OOB, but I'll review some walk around galleries, to see if there are any extras I should add. I think the camouflage scheme will be challenging...
4 August, 21:31
![](/profiles/img/user-s.jpg)
Welcome, Guy. Slow progress, but holidays are over, so progress Wil re-commence!
25 August, 18:48
![](/profiles/img/48972-166-s.jpg)
I will follow this build for sure. I have been tempted so many times to purchase this kit... 😉
26 August, 17:04
![](/profiles/img/23223-112-s.jpg)
marqué cet article comme sur commande
![1:350 26' whaleboat (L'Arsenal AC 350 18) AC 350 18](/products/img/8/3/8/104838-10244-55-t180.jpg)
26' whaleboat
L'Arsenal 1:350
AC 350 18 26 August, 17:01
![](/profiles/img/144821-523-s.jpg)
So when im returning to tallinn for school i can start making models again. Im planning to make a moc with these claypitrc.eu/en/a/ta..i-tank-gun-pak40-l46 claypitrc.eu/en/a/ta..-tank-type-97-chi-ha , a few paints and some fake grass/whatever i can find aswell. But since its my first moc im looking for tips on how to make the weathering look more realistic and how to make the ground look more like 1944 japan. Im also going to use more advanced building techniques and keep you guys updated with regular pics of my journey. Ps: i am feeling a lot better as im making friends and venting to gorby (great lad who makes amazing builds.) Im excited to get back to my favourite hobby 👍
25 August, 22:32
![](/profiles/img/43210-278-s.jpg)
I built that Pak 40 when I was a kid. It is a nice kit with figures and shell casings and stuff. It is fun to paint the uniforms on the little dudes. I left the gun itself in grey plastic and just painted the details.
25 August, 23:14
![](/profiles/img/20442-422-s.jpg)
Thanks for the compliment Kesa. 👍
Insulation foam board is good to use as the base for a diorama and you often see offcuts in skips. You might need to ask first as some people get arsey when you take things out their skip (why, it's bloody rubbish?). Also it is possible to use real soil as soil in a dio, although you would need to cook it in a microwave or cooker and whoever is responsible for those items may not be too happy about it. Probably best to ask first with that as well.
You need to sieve the soil. This step can be messy.
Cook it in briefly to dry it and kill the microbes (to stop it smelling). Best to use cleaned takeaway metal foil containers.
Mix it with PVA glue and spread it on your dio. This step can be very, very messy.
I've used it a few times in various dioramas and it works well. Best of all, it comes soil coloured. 🙂
26 August, 13:55
![](/profiles/img/20442-422-s.jpg)
If you look at photo 23 & 24 of this album you'll see both being used:
Jehlik's Armoured Vehicle, 1916 – Scratching the Ridiculous Roller. | Album by gorby (1:72)
26 August, 17:00
![](/profiles/img/user-s.jpg)
veut cet article
![1:48 TORA TORA TORA! (Zero A6M2 Type 21) (Eduard 11155) 11155](/products/img/2/2/6/1379226-103169-51-t180.jpg)
TORA TORA TORA! (Zero A6M2 Type 21) Limited Edition / Dual Combo
Eduard 1:48
11155 2021 Nouvel outillage 26 August, 17:00
/fr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=fr
35
35
/fr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo