Fil d'information

Cristian A
What a beautiful result, congratulations !

Neuling
Yes! Clean, careful, beautiful. A joy to watch.

Łukasz Gliński
Impressive job 👍

Duster_d
It looks great! 👍

Tibor Szilvai
Top Work! 👍

Guy Rump
Great job! 👍

dawei xu
The kit actually has R-172

DerMattes
Great build! 👍

Mojo DeVirus
WOOOOOOW !!!!

aetios
Super nice paintjob!!

Alexander
Beautiful hellduck, and great photography on top! 👍

CaptGPF
Agree with everyone - simply beautiful!

Skyhiker
Love it.

George Williams
Nice work so far.

Martin Oostrom
I agree

Bozzer
Your masking has definitely improved, mate. Nice job!

nikfrost
Thanks Bozzer! I think I'm getting the hang of this gloss finish also...hopefully.

Mr D
Nice 👍 very nice, the cast texture on the engine looks good, it's the prv V6 is it ?
I had an RC version as a kid .
Will look fantastic when the decals go on.
👌

nikfrost
The cast texture is Tamiya flat aluminium XF-16 very poorly sprayed by me haha, I think it was drying on its way from the airbrush to the surface and kind of built up.

Mr D
Worked well to the effect 👍 Tamiya dries really fast , l use Velejo mostly, l found Tamiya to fast n thickens up in the pot, Velejo doesn't harden like Tamiya n definitely needs good clear coat.
Nice project 👍

nikfrost
I always put a dollop of tamiya lacquer thinner in and two mixing balls, seems to keep it moving quite well.

Martin Oostrom
Seatbelts look really nice!

nikfrost
Thanks Martin, it's always the bit I dread haha

Martin Oostrom
Good job on the internals and the paint looks very smooth

Skyhiker
What scale is this? There are some amazing details. Top job!

Rob K.
The scale is 1/48. I am new to scalemates. Just joined. Trying to find this post. Under which header/subject are you able to see this album? I am unable to find this post where everyone can see it. Thanks

Roland Sachsenhofer
This project has been waiting long enough, now the time has come! The "shell", seen here, is quickly put together, the glued seams are still wet, so to speak. I plan to show the A90 in a proper dio - gliding just above the water!

Michael Kohl
One one those weird sovjet constructions. Will be fun to follow.

Roland Sachsenhofer
Oh yes, Weird and.... big. That must have been a massive vehicle!

Ben M
watching

Skyhiker
Neat

Roland Sachsenhofer
Feel very welcome! 🙂

Treehugger
I just remembered, I have this kit in my stash.
Are those windows on the side? Like on passenger jets?

Roland Sachsenhofer
If this was some kind of passenger aircraft, I would book a flight for sure. 🙂
I will drill the windows and fill them with Krystal Klear.

Raz1
No windows, apparently.

See en.wikipedia.org/wiki/A-90_Orlyonok

Dave Flitton
Watching!!

Roland Sachsenhofer
Thank you both for interest and comments! Well, I will think over with that windows.... Thank you for the link!

Skyhiker
Looks to me like there are windows in that Wikipedia photo.

Raz1
I stand corrected. I had originally not seen the windows. Thanks, Skyhiker.

Plenty of interior photos here: flickr.com/photos/la..597/with/45021731405

And the last surviving example (per Wikipedia) is here: museum-vmf.ru/

Even though the appropriate page won't load here, a photo displays in the top-of-page banner rotation.

Skyhiker
Wow, those interior shots are incredible.

Roland Sachsenhofer
I agree, what pictures! The question of the windows should now also be answered "from the inside" as well. Thanks for these excellent links, mates!

Roland Sachsenhofer
A few new pictures here too: the finished pre-shading has shown a few touch-up needs, but tomorrow I want to be able to apply the surface colour!

Michael Kohl
Probably too late, but that project would have been perfect to try a levitation display.
amazon.de/Magnetic-L..aps%2C127&sr=8-3

Roland Sachsenhofer
I think it's a really wonderful idea.... A few Star Wars themes are in the making, possibly here: I would also like to see a Tie-Fighter hovering over this base.

A nice encounter - magnets are actually being used in this project! Since I want to show the "Orlyonok" gliding over a water surface as well as standing still, I have prepared two versions of the props. In order to be able to change them stably, I attached magnets to the axis of rotation. The one on the engine was inserted through a hole from the outside. It sits on the tip of a toothpick, which has been inserted through the hole in the inside of the engine. The magnet now sits exactly in the centre of the engine diameter. The second magnet only had to be glued to the two ends of the propeller axles. Now, it works perfectly with a soft "click"! 🙂

Łukasz Gliński
Interesting project, will follow

Robert Podkoński
Following for sure. It is a great idea to use magnets.

Roland Sachsenhofer
Thank you mates for interest ans motivation!

Roland Sachsenhofer
The Oryonok still looks a bit 'artificial', but in principle shows its surface colours, which will hopefully breathe a little life into it, are the traces of use and wear that I will still apply. The windows on the fuselage will of course also be drilled out and filled with clear white glue.
At the same time, the water base is now being worked on. This time I'm using a light filler on a polystyrene base as a base for this, with Vallejo water gel on top.
The magnetically interchangeable ahrwerk and propeller have worked - which is great news of course!

Skyhiker
That's moving along fast.

Roland Sachsenhofer
Thank you mate!

Roland Sachsenhofer
A few pictures of the water base in the making: I'm using a new material to build up the water surface. This so-called 'light filler' dries within 24 hours and is easy to shape with the appropriate tools - here with a simple brush

Robert Podkoński
Just a suggestion, Roland - an ekranoplan flying above the sea 'irons out' the waves under its wings in a characteristic manner:
oldmachinepress.com/..rlyonok-ekranoplans/

Roland Sachsenhofer
Robert, thank you for that important hint, I wasn't aware of this!

Roland Sachsenhofer
....and thank you for the excellent link as well!

Robert Podkoński
I am just happy to be of any assistance to you, Roland 🙂

Roland Sachsenhofer
Robert, your hint made me to rethink and rebuild the whole thing a bit: the strip of water flown over is no longer deeply furrowed, but has been flattened - the picture material helped a lot.
You can see the whole thing now primed with Tamiya acrylic paint and coloured once, tomorrow transparent water gel from AK will be applied...

Guy Rump
Looking good, following. 👍

Roland Sachsenhofer
Appreciated! 🙂

Robert Podkoński
Water looks already like on these photos, Roland. I cannot wait to see the plane levitating above the waves...

Roland Sachsenhofer
That´s motivating! 🙂

gorby
The water effect is very convincing!

Neuling
Yes

Roland Sachsenhofer
Thank you mates! Very appreciated!

Roland Sachsenhofer
Before I continue with pictures of the water base that was completed today, I'll show you a few snapshots of the completed 'Orlyonok'. As you know, I made it with interchangeable modules for both a land and a flying display; here you can see the 'land version'.
Tomorrow there will certainly be an opportunity to catch the aircraft flying by and photograph it in flight. 🙂

Skyhiker
Looks fantastic!

Ben M
very realistic. the weathering and the land diorama came out perfectly. can't wait to see it on the water!

Desert Marlin
The REEDOAK 3D Printed Pilots are awesome!

Desert Marlin
This project will have both pilots on the intercom and watching the engine startup process. That is why the same type figure is used in both cockpits. They both monitor the engine to ensure that the EGT and RPM is increasing appropriately. Each has their hand on the control stick to be able to open their MIC as they confirm everything is normal at start. The plan is to have the aircraft loaded with a Nuke (Apache Cruise Missile?). Seems appropriate to me for the days we live in now...

Desert Marlin
Have to pause this one until I get the BIG ED kit #33216...

Treehugger
Maybe go for resin seats as well?
Seems like kit plastic never can compete with resin seats. 🙂

Though, I no longer crave for resin interior for the cockpit because of the work, but seats are ok.

Desert Marlin
I'll paint these up and see if I can tolerate them. If they are too bland, I have time to change my mind! Thanks for the idea!

Desert Marlin
Great video of the weapon that goes with this version of the Mirage 2000N

Youtube Video

Desert Marlin
Time to return to the 2000N... Let's Nuke something!

Desert Marlin
I got the ResKit Mirage 2000N Cockpit Set (Detailed Version).

Desert Marlin
As I have begun work on this kit, I am yet again struck by the lack of information in the variations and options provided in the kit. For example, the tail tip is not called out that applies to the 2000N version. While the nose of the 2000D is provided in the kit, it has to be modified to make it correct for the 2000N. Oh bother…

Desert Marlin
Selected "most appropriate" tail tip and mounted the correct nose to fuselage.

Guy Rump
Looking good, following. 👍

Tony Stark
Thanks guy!

Ekki
I"m in.

Tony Stark
I'll prepare all you guys who are watching this.
I'm going to be decalling this up as a what if model.

There are several decal options I have of the RAF Grey Hawk scheme that will go to waste and one of the decals I used on this aircraft broke so I've used a mixed match of decals from all of them to create a special scheme celebrating all the Grey Hawk T.1's at RAF Chivenor.

Guy Rump
Very nice job! 👍

Tony Stark
Thanks Guy!

Ekki
Lovely plane.

Tony Stark
Thanks Ekki!