Fil d'information

Sven Schönyan
I´ll take a seat in the front row!

Ingmar Stöhr
You're welcome! I hope you brought enough beer and chips as this might take a while 😉
An please make sure you keep a safe distance of at least 1.5m.

Mike Kryza
Schau ich mir doch gerne an.

Acki
Bin auch gerne dabei, aber den Mindestabstand kannst Du vergessen. Da erkenne ich nichts mehr. 👍

Ingmar Stöhr
Willkommen an Bord!

Ingmar Stöhr
Progress on turret No.2

Ingmar Stöhr
Slow progress in the last days because of beautiful weather. Finally managed to finish No.2 turret

Ingmar Stöhr
A few days off and bad weather lead to some progress on this project. Pontos set misses some details and the resin parts are generally excellent. A few show more flash and other minor defects. But still a vast improvement over the kit parts.

Lochsa River
nice build...sitting in

Ingmar Stöhr
welcome on board!

Joerg R.
Hey Ingmar baut ein neues Schiffschebootsche, klasse 👍👍

Ingmar Stöhr
I managed to complete all the Armored Box Launchers and the Harpoon Launchers. I even put all my courage together and started the opened launcher from the Infini set. 83 PE parts, 5 turned brass parts, some plastic sheet an 6 hours was all it took to build an amazing tiny detail for New Jersey.
@Joerg: Herzlich Willkommen

Sven Schönyan
Very nice progress and good work on the launchers and funnel!

Łukasz Gliński
That Kaman looks like 1/144 or my 1/72 builds, respect! 👍

Ingmar Stöhr
Thanks a lot!

Treehugger
The smokestack work in photo 10 looks really nice I think. Fun to see others drilling out the holes in pipes and stuff. 🙂

Ingmar Stöhr
How can you not drill out all the pipes. That would be really insane 😉

Christian Bruer
I call it a promising start, excellent work so far Ingmar 👍

Ingmar Stöhr
Thank you Christian! I'm very glad to have you on board!

Ingmar Stöhr
Today it was time to finish the four Phalanx CIWS. The detail on the Pontos parts is absolutely breathtaking. A was with black oil and afterwards a careful dry brush with light grey and white is all that was needed.

Thomas Bischoff
Amazing level of details 👍

David Taylor
Im in.

Fly By Jan
wooooooooooowwww, this looks very exciting! I am following!

Ingmar Stöhr
Thank you mates!

Ingmar Stöhr
Finished the weapons platform for the aft. CIWS.

Ingmar Stöhr
Today I managed to complete all the 5 inch guns. The detail on the Pontos parts is superb! Only thing I had to change where the gun mantlets (not sure if that is what it's called for naval guns), as the Pontos parts are way to small.

Sven Schönyan
Great result!

Ingmar Stöhr
Finally some progress to show. I used the old Tamiya kit to replicate the SH-3 Sea King seen on board New Jersey in 1983. I added struts to the wheel sponsons an the fin on the tail boom. The MAD probe on the starboard sponson was made from styrene rod. The tail rotor is made from thin styrene strips. The main rotor came from my own Elegoo Mars SLA printer. The Tamiya rotors look more like bricks...
Most of the markings are hand painted to match the exact Sea King shown in a series of pictures from 1983.

Ingmar Stöhr
Upper superstructure with main mast and radars assembled, painted and weathered.

Sven Schönyan
Excellent paintwork! I like your highlighting!

Spanjaard
amazing job!!! the radar is fantastic. and i really like the SH-2 and Sea King

Ingmar Stöhr
Thank you Sven and Spanjaard.

Thomas Rieck
Moin Ingmar. Wie bekommst du auf dem letzten Bild dieses "verwaschene" Grau hin? Lackieren und dann? LG Thomas

Slavo Hazucha
Just found this project - fascinating work, so much attention to detail and an absolutely clean results - I really like your painting & weathering weathering too, you strike a great balance between macro & micro and a great scale impression result! 👍

- happy to jump on board mid-project 🙂

Ingmar Stöhr
Thank you Slavo! The project has been on hold for quiet a while now. But hopefully I will get back to it very soon.

Norbert Steffens
What I've seen looks fantastic. I predict that your USS New Jersey is going to be a excelent model

Ingmar Stöhr
Thank you Norbert! Now I have to live up to those expectations 🙂

Konrad -
Very nice Ingmar. Count me in here as well.

Lenny Hoffmann
Wahnsinn, weiter so

Stefan Fraundorfer
Das sieht alles unglaublich genial aus Ingmar. Super Bemalung und Alterung. Nur eine Kleinigkeit ist mir aufgefallen. Die untere Stiege im Bild 36 ist verkehrt angeklebt. Oder hat das einen bestimmten Grund?

Michael Osadciw
Wow. What a lot of detail. How do you like the 3D printer you have? I've been thinking of getting one for creating parts and hopefully full 1/35 scale figs once I get some more Blender sculpting knowledge under my belt.

Ingmar Stöhr
Thank you everyone!
@Stefan: Die Treppe hat es auf dem Fotor "nur" nach hinten umgebogen. Da ist schon alles richtig 😉
@Michael: I'm very happy with my Elegoo Mars. For around 250EUR it delivers very nice detail! I did a lot of modeling and sculpting in Blender the last months. Have a look at those two projects:
St. Mary's Church, Falklands April 1982 | Album by stugiii (1:350)
Lighthouse on Cliff 1/350 scale (3D printed) | Album by stugiii

Ingmar Stöhr
Today I was able to complete the main armament. Turret No3 also needed some modifications to resemble the prototype in the 1984 time frame.

Ed Batres
I'm curious, why are there handrails on the turrets? When would the sailors use them? How do they reach them? I'm primarily an aircraft builder, but appreciate great work. Thanks. Great attention to detail. Pleasure to see the work you do.

Ingmar Stöhr
Hi Ed, I'm not entirely sure, but most likely they would be used to secure a sailor with a rope when doing maintenance or some paint work. You find similar rails around the whole bridge, e.g. for cleaning windows or repairing something from the outside

navycod
This is awesome, serious approach!

Slavo Hazucha
A 10-part PE front leg mudguard assembly! Does not get much more hardcore than this! 👍 Nice start, watching!

Jan Peters
Taking a seat, following this 👀

gorby
Looking very good so far Kesa.

Doubtingmango
Watching

Ingmar Stöhr
Nice progress so far! Overall nice paintjob, but maybe try to use a little less paint on the railings. I see a lot of small paint balls forming there.

Guy Rump
Great job so far, following. 👍

Miguel Vaquero
Following!

Chrisswe
Thanks for your interest and comments. I did something wrong with the primer when painting the railings which caused the paint balls. Also I'm not great at working with PE yet and the glue residue is often visible even if try to paint over it. All in all I still think I'm making some improvements compared to my last build. Rigging will be my greatest challenge for this build.

Ingmar Stöhr
Ah, ok! Well yes, your glue is visible here an there, but otherwise I find your application of PE is not bad at all! What works for me with railings is to hold them in place with one hand (and tweezers) and with the other hand apply a tiny amount of very thin super glue from a piece of thin copper wire fixed to a toothpick as handle. This will instantly wick into the gap and also instantly fix the railing in place. After that I paint over the seam with the appropriate colour and mostly end up with very nice glue joints.

Chrisswe
That is probably the correct way to do it Ingmar. I find it difficult to only use the thin super glue as it has zero adhesive effect until it bonds. I use super glue gel to fix one end of the railing and then use your method for the rest.

Chrisswe
I'm testing a grey-brown panel liner instead of the black one I used for all of my last ship. It looks good closeup but might be to subtle when you look at the whole ship. Is it a bad idea to use anything else than black panel liner even on lighter colours when doing 1:350 scale?

Ingmar Stöhr
Actually super glue should set / cure / stick faster the thinner it is. A gel does lengthen the setting time. I start at one side, place the railing, put a tiny bit of thin super glue at the joint and it will typically set withing 2-3 seconds. Then I move a bit further down, align the PE, put glue there and so on. What also increases the setting time is a larger gap. If the gap ist very small and the glue very thin it will usually literally set instantly.

I like my wash with a lot of contrast. On my modern US Navy builds (kind of a medium gray) I will use blue-black panel line wash from AMIG. On a lighter gray, as with the superstructure on DKM units, that might be a bit to much contrast though.

Chrisswe
I will try to master the thin super glue but I think the sticky property of the gel before it cures is very helpful. I can still use gel when gluing where it will not be visible at all.
Another thing I have done differently with this build is to just base paint the details and railings before I attach them to the superstructure and hulI. I will gloss coat, weather, matt coat and oil highlight the superstructure mostly built together but excluding the masts and funnels. I will do the same thing with the hull with everything added except main guns.
I noticed the super glue attacks the paint much more than when everything was already gloss and matt coated before gluing but maybe the end result will be better.

Ingmar Stöhr
Strange. I never have noticed my glue attacking or damaging the painted surfaces. Usually, I build my ships in sections which get painted separately before final assembly. Also, I always airbrush my railing before gluing it to the model. There will be scratches from tweezers, but for me it is much easier to make some touch-ups than to brush paint the whole railing on the ship.