Fil d'information
![](/profiles/img/69549-161-s.jpg)
a ajouté un nouvel album photo.
78 images
Avia BH-10, first production run - WIP![View album, image #70 View album, image #70](/albums/img/5/0/8/1770508-69549-56-720.jpg)
1:48
From the kit I will use only the wheels and the platform with the wheel axle. I have modified both, though. I drilled a ...
Projet: Avia BH-10
43 1 June, 23:28
![](/profiles/img/69549-161-s.jpg)
Good to see you, Alec. As you can guess, this is gonna be a big show. There's gonna be a lot of cutting, a lot of editing, and of course, I'll be scratching out new parts. At this point, I'm still planning the build process. But work on the model will soon be in full swing.
3 June, 22:57
![](/profiles/img/69549-161-s.jpg)
Welcome, Pierre, I'm very pleased to see your interest. I hope you find my rebuilding interesting.
The manufacturer of the Avia BH.9 model states 1/48 scale on the box. Actually the model is made in a slightly smaller scale 1/50. I don't mind that in this case. The Avia BH.10 is very similar to the Avia BH.9, but because it is a single-seat aircraft, it is smaller overall than the Avia BH.9. . So even if I build a single seat Avia BH.10 in 1/48 scale, I will be scaling down the fuselage and wing parts from the kit. I have been comparing the fuselage and wing parts to a 1/48 scale drawing of the Avia BH.10 and wondering how to scale the parts down to fit the desired shape and size.
4 June, 08:14
![](/profiles/img/21997-347-s.jpg)
Nice project! The BH-10 will fit nicely between your finished BH-9 and BH-11 👍
4 June, 19:35
![](/profiles/img/69549-161-s.jpg)
Frank, you make a good point. The Avia BH.10 will add to my collection of Avia BH series monoplanes from the 1920s. They are very interesting and modern aircraft for their time, if only because biplanes dominated the skies at that time.
4 June, 22:19
![](/profiles/img/21997-347-s.jpg)
Successful reshaping of kit parts 👍
Not very much left of the kit, but it looks like that way needs less work compared to a full scratch build.
6 June, 18:31
![](/profiles/img/69549-161-s.jpg)
That's right. Due to the great similarity of the fuselage and wings of both Avia's, it is easier to modify these parts than to produce completely new ones. Still, there will be a lot of work involved in building the model.
At the moment I have the basic parts roughly ready. I still have to work on them. I will have to do some puttying and sanding. And then fill in all the details.
7 June, 10:33
![](/profiles/img/23938-707-s.jpg)
Nice progress. Watch, KP will release their 1/72 kit in 48 just as you finish… 😉 😄
7 June, 13:19
![](/profiles/img/69549-161-s.jpg)
I'm not really worried about that. Even if it happens, I'm fine with it. Avia BH.10 in 1/72 scale is not very accurate. And if KP goes the route of enlarging parts of the 1/72nd scale model while making a 1/48th scale model (which I think is very likely), it will transfer all the errors of the original model to the new one. Plus, I really like these "crazy" rebuilds. It's a lot of fun for me. 😉
7 June, 14:23
![](/profiles/img/23938-707-s.jpg)
I fully agree, scratch builds and conversions are a lot of fun. I'll have to compare the KP kit to drawings before starting mine 👍
7 June, 19:51
![](/profiles/img/69549-161-s.jpg)
Alec, before building a model you have to choose which machine you want to build. I'm building a first production run machine, but KP's 1/72 scale kit is a second production run machine. Otherwise there were machines with special modifications. And be careful which drawing you want to use. Some drawings are not very accurate (for example the drawing from Modeler 7/1986).
I have described the basic differences between the first and second production series machines in the attached photo.
9 June, 10:12
![](/profiles/img/69549-161-s.jpg)
Alec, you can find a lot of useful information about Avia BH.10 on Czech Modelforum in Pavel Kloucek's overviews.
Information about machines from the first production run can be found here: modelforum.cz/viewtopic.php?f=310&t=143236
And information about the machines of the second production series is here: modelforum.cz/viewtopic.php?f=310&t=143254
A lot of interesting information about the Avia aircraft designed by Benes and Hajn is in this book: nasevojsko.eu/nasevo..onstrukce-Benes-Hajn
I sent you a PM about the drawings.
9 June, 17:11
![](/profiles/img/69549-161-s.jpg)
Unfortunately I only have one period photo of the cockpit, which shows the instrument panel and the right side of the cockpit.
I'm working from the drawing to create the controls and instruments on the left side of the cockpit and floor, with the help of photos of the Avie BH.11 cockpit.
Since the Avie BH.9, 10 and 11 have the same engine and very similar construction, I think most of the cockpit controls were designed very similarly, if not identically.
14 June, 21:52
![](/profiles/img/69549-161-s.jpg)
Welcome my friends! Thank you for your interest and popdoru. I really appreciate it.
15 June, 21:53
![](/profiles/img/69549-161-s.jpg)
I finished the cockpit. After gluing the starboard side to the cockpit, I'll mount the cockpit to the fuselage.
15 June, 22:09
![](/profiles/img/23938-707-s.jpg)
Your prop effort beats mine. I tried with sandwitched colored paper infused with resin but needed a painted color overlay. I need to try with correct colored card stock next time.
16 June, 01:20
![](/profiles/img/69549-161-s.jpg)
Making a propeller out of coloured cardboard was an experiment for me. I wondered if it would work.
16 June, 23:43
![](/profiles/img/69549-161-s.jpg)
I finished making the cockpit. Now I'm going to glue the bottom of the fuselage and then putty and sand the fuselage.
16 June, 23:54
![](/profiles/img/69549-161-s.jpg)
It was time to puttying and sanding. We'll see how many times I have to repeat this cycle.
19 June, 21:47
![](/profiles/img/69549-161-s.jpg)
Villiers, welcome! Good to see you again.
This aeroplane is very simple and there are very few small details on it. But the few that are on it, I'll be sure to pay attention to. 😉
Bughunter,
maybe your plan to buy shares in the putty maker will pay off. At least in my case the putty maker made a profit 😄.
I know the fuselage doesn't look good with a heavy coat of putty. But the hull needed that layer of putty on the bow. I had to fill in all the joints and minor unevenness. There won't be much putty left on the hull after sanding, but since the putty shrinks as it dries, it's hard to tell ahead of time where more putty is needed and where maybe not. In this case, more is better.
20 June, 10:15
![](/profiles/img/69549-161-s.jpg)
The fuselage, wings and tail surfaces are ready for minor detailing. In the end I just needed one rough puttying, sanding, spraying surfacer, one fine puttying of minor defects, sanding again and final surfacer.
21 June, 16:34
![](/profiles/img/125872-847-s.jpg)
Amazing how this turnded out till now Ludvik! Biggest respect for this special project and efforts you make on it. Looking forward to the next steps 🤩
22 June, 11:08
![](/profiles/img/69549-161-s.jpg)
Mates, thank you all!
It's great to have you on board. Your support means a lot to me.
22 June, 16:40
![](/profiles/img/69549-161-s.jpg)
After a short vacation I returned to building the Avia. I haven't had much time to build it yet.
I taped the tail surfaces with masking tape so I could spray thin strips of surfacer on the ribs.
To indicate the slight sagging of the canvas on the wing surfaces that were only covered with canvas, I started scraping these surfaces very gently with a round-bladed scalpel. Once I had completed this operation on both wings, it was my turn to cover them with masking tape so that I could spray strips of surfacer on the wing ribs.
I'll add photos of the work in progress next time.
29 June, 10:35
![](/profiles/img/69549-161-s.jpg)
I'm slowly resuming my work. I've sprayed the rib bands on the wings and added some minor detailing to the left side of the fuselage.
3 July, 22:32
![](/profiles/img/69549-161-s.jpg)
The top and side surfaces of the Avia are sprayed with the first of three camouflage colours.
8 July, 21:12
![](/profiles/img/69549-161-s.jpg)
Moreno Baruffini, thank you, I appreciate it.
Alec, when this Avia is finished, it will complete my collection of Avia BH-3, Avia BH-9 and Avia BH-11 monoplanes from Benes and Hajn constructors.
9 July, 22:23
![](/profiles/img/69549-161-s.jpg)
Villiers thank you for your interest.
Due to the summer season and its associated activities and the occasional babysitting of my 15 month old grandson, I have less time to build the model. Progress will be slower.
10 July, 07:36
![](/profiles/img/69549-161-s.jpg)
The upper surfaces of the Avia are already covered with tri-colour camouflage. There was no time to spraying silver paint on the lower surfaces today. At least I know what I will do next time 😄.
12 July, 23:35
![](/profiles/img/21997-347-s.jpg)
The colours bring it to life!
And no worry about slower progress - family and life is very important.
14 July, 18:42
![](/profiles/img/69549-161-s.jpg)
@ Villiers and Alec
Thank you for your support, it is very much appreciated.
@ bughunter and Moreno
You are right, family is important and has a higher priority than building models. Don't worry, I'm clear on this point. 😉
17 July, 21:31
![](/profiles/img/69549-161-s.jpg)
Today I had time and also the daytime temperatures dropped to a bearable limit so I took advantage of it and moved the construction a little bit again.
17 July, 23:10
![](/profiles/img/69549-161-s.jpg)
I continue building the model by making parts for the landing gear, propeller and wings. I also printed the decals with the serial numbers.
20 July, 00:06
![](/profiles/img/69549-161-s.jpg)
Mates, thank you!
Robert, it's true. Once I finish the individual assemblies, the model building and completion of the model will move forward quickly. 🙂
20 July, 10:23
![](/profiles/img/69549-161-s.jpg)
@ Bughunter,
you're not far from the truth. During the building of my Avia BH - 9 and Avia BH - 11 kits, I received quite a lot of inquiries from Czech modellers asking if I was thinking about releasing the kit in a short run.
Unfortunately I don't have the equipment or experience to produce these kits. That is why I am sticking with my rebuilds and builds from scratch. But they say "never say never". So who knows, maybe someday... 😉
@ Guy Rump, Curatorm
Thanks for the kind words, it's a great inspiration for me to continue working on this project 🙂.
20 July, 14:27
![](/profiles/img/91896-978-s.jpg)
possède cet article
![1:48 Douglas TBD-1 'Devastator' (Great Wall Hobby L4807) L4807](/products/img/0/2/7/131027-120841-82-t180.jpg)
Douglas TBD-1 'Devastator' VT-8 at Midway 1942
Great Wall Hobby (GWH) 1:48
L4807 2012 Nouvel outillage 23 July, 21:17
![](/profiles/img/58434-262-s.jpg)
a ajouté un nouvel album photo.
41 18 July, 19:00
![](/profiles/img/144362-134-s.jpg)
I love it! 😎
If you like creating hetzers, I recommend recreating a hetzer captured by Polish partisans called "chwat".
22 July, 07:55
![](/profiles/img/user-s.jpg)
a terminé cet article
![1:48 MiG-17F Fresco C (Ammo by Mig Jimenez A.MIG-8511) A.MIG-8511](/products/img/4/9/7/1468497-27571-76-t180.jpg)
MiG-17F Fresco C Egyptian - Syrian Air Force
Ammo by Mig Jimenez 1:48
A.MIG-8511 2023 Nouveaux décalcomanies 23 July, 21:12
![](/profiles/img/user-s.jpg)
possède cet article
![1:700 IJN 2nd Class Transport Ship (Type No.101) Upgrade Set (Five Star Model FS710019) FS710019](/products/img/4/0/6/956406-14904-25-t180.jpg)
IJN 2nd Class Transport Ship (Type No.101) Upgrade Set for Tamiya 31501
Five Star Model 1:700
FS710019 2016 Nouvel outillage 23 July, 21:12
![](/profiles/img/20442-422-s.jpg)
a ajouté un nouvel album photo.
33 images
Don’t get the hump - The Bedford Dromedary![View album, image #26 View album, image #26](/albums/img/8/9/1/1770891-20442-59-720.jpg)
1:76
To give you an idea of the size.
Everything other than the cab and the tractor chassis is scratch-built.
Projet: Bedford Dromedary.
25 13 July, 13:59
![](/profiles/img/20442-422-s.jpg)
New photos start at number 10.
This may give the impression that I've completed this in a couple of weeks...it's been nearer two months. Although the build is complete this update doesn't take us to the end of the build process.
Thanks for having a look. 🙂
16 July, 15:40
![](/profiles/img/20442-422-s.jpg)
Thanks Alec. I've tried cast parts in resin before and it wasn't very successful, this time I used silicon as the mould and that made all the difference. It's really easy with silicon. 🙂
17 July, 07:06
![](/profiles/img/21997-347-s.jpg)
Holy moly - what a nice little model! Great work so far 👍 Sorry, I was not in the mood to follow all the nice builds here, so I discovered it lately.
And thank you very much for mention me in the album info 😉
18 July, 06:52
![](/profiles/img/20442-422-s.jpg)
No problem mate, I have times I'm not in the mood to comment, quite often really as I'm a grumpy old git. 😄
I hope to get the final photos posted at the weekend, it's finally stopped raining here so busy doing other jobs at the moment. 🙂
18 July, 11:13
![](/profiles/img/20442-422-s.jpg)
Finally got around to taking some photos of this ridiculous beast, thanks you all for following the build. 🙂
20 July, 14:57
![](/profiles/img/20442-422-s.jpg)
Thanks David. 👍
Thanks Neuling, although you're mistaking me for a proper modeller if you expect a dio. 😄 😄
I have to be in the right mood to to do a dio and at the moment I just feel like building models. 🙂
21 July, 06:48
![](/profiles/img/10792-966-s.jpg)
Wow, very impressive and excellent work with a lot of scratchbuilt parts - love it 👍
21 July, 13:54
![](/profiles/img/20442-422-s.jpg)
Thanks very much Christian. Apparently the drivers didn't love them because they were sooooo slow. 🙂
21 July, 14:00
![](/profiles/img/21997-347-s.jpg)
A small piece of tarpaulin over the first bows would make it even more interesting.
No, it was a joke 🙂 Nice model of a vehicle with British style.
22 July, 17:52
![](/profiles/img/user-s.jpg)
Thanks for CaptGPF for poiting out the scrstch building. I would have completely missed it and thus a very enjoyable build report.
One of those builds that would have looked really good without paint too.
I got stuck with my QLD over the humps as I did not manage to shape them identically. Your idea with the jig might breath in some life into that build again. Thanks for that too.
22 July, 18:35
![](/profiles/img/20442-422-s.jpg)
Thanks very much matiepoos! 🙂
Buggy, I'll let you in on a secret just as long as you don't tell aaanyone else....I just got fed up with working out how I was going to put the tarp on the back and do the lacing onto the tie-downs. Therefore I decreed that it was nice day and they wanted to have the roof down. 😄 😄
Michael: I managed to confuse some others on a different forum about how much of this was scratch-built. Confusion seems to be my natural state and maybe I'm infecting everyone else. 😄
Spanjaard: I've even surprised myself with this one. Am I finally getting the hang of this modelling lark....then I see Frank's work and think how much further I have to go. 🙂
Thanks again everyone for you nice comments and to anyone who has clicked on 'Like'. 🙂
23 July, 08:03
![](/profiles/img/21997-347-s.jpg)
Thank you very much for the trust you have placed in me, gorby! Of course I won't pass on this secret, but will take it to my grave.
23 July, 16:21
![](/profiles/img/19018-810-s.png)
possède cet article
![1:72 Type 73 Heavy Tank Transporter & Type 74 Tank (Aoshima 009963) 009963](/products/img/5/7/1/392571-11104-58-t180.jpg)
JGSDF
Type 73 Heavy Tank Transporter & Type 74 TankAoshima 1:72
009963 (SP) 2014 Nouvelles pièces Multi sujets (2)23 July, 21:10
![](/profiles/img/19018-810-s.png)
possède cet article
![1:72 JGSDF Type 60 Self-propelled 106mm Recoilless Gun (Aoshima 007969) 007969](/products/img/2/5/4/246254-11185-93-t180.jpg)
JGSDF Type 60 Self-propelled 106mm Recoilless Gun (2 vehicle set)
Aoshima 1:72
007969 (06) 2013 Nouvel outillage 23 July, 21:10
![](/profiles/img/126732-240-s.jpg)
a ajouté un nouvel album photo.
13 22 July, 09:39
![](/profiles/img/user-s.jpg)
possède cet article
![1:700 Japanese Military Transport Set (Tamiya 31501) 31501](/products/img/1/1/8/171118-10571-t180.jpg)
Japanese Military Transport Set Waterline Series
Tamiya 1:700
31501 (501) 1997 Nouvelles pièces Multi sujets (8)23 July, 21:09
/fr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=fr
35
35
/fr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo