BA-20 Construction
Commentaires
9 17 March 2013, 12:20
![](/profiles/img/10244-398-s.jpg)
Planned to be finished within one weekend.... 🙁 It shouldn't happen.
Lot of filler needed. Mold seams are quite extensive. It's more hand-crafting than just glue together, but it's still fun. 😄
17 March 2013, 12:30
![](/profiles/img/12987-s.jpg)
Looking good so far. I have a bunch of projects that started out as weekend builds😉
17 March 2013, 13:52
![](/profiles/img/10244-398-s.jpg)
Hi Roy, initial idea was to build it OOTB, just to get something ready, before I continue the other projects. 30 years ago it would have worked, but now...?
Once one looked at reference pics it starts. Hmm, this looks different and could be changed. And this, and that, and...
17 March 2013, 15:11
![](/profiles/img/11200-s.jpg)
Maybe it will last longer than only one weekend but I think the result will be great!
17 March 2013, 18:55
![](/profiles/img/10244-398-s.jpg)
Thanks for the support, guys! I'm fighting with the interior white. I guess, this will become the only colour, I will spray in future. Need to get a bottle of spray white....
17 March 2013, 19:39
![](/profiles/img/10244-398-s.jpg)
Nearly no progress. Just replaced inside and outside door handles with wire.
I had to break up the upper hull again, because it didn't fit straight on the lower hull.
29 March 2013, 10:50
![](/profiles/img/13121-123-s.jpg)
Schöne Arbeit Frank... aber die Griffe sehen ein wenig Grob aus.. probier doch mal Gitarrensaiten.. die gibt es ab ca. 0,4mm.😉
29 March 2013, 11:28
![](/profiles/img/10244-398-s.jpg)
Thanks, Holger!
Hmm, hast Recht, Frank. Ich schau mal, was ich noch im Fundus hab. Im Original betrachtet sehen sie gar nicht so wuchtig aus. Der Makro zeigt es dann wieder. 🙁
29 March 2013, 11:33
![](/profiles/img/13121-123-s.jpg)
Frank??? *g* wieso nennen mich alle Frank... Du bist nicht der erste hehe 🙂
29 March 2013, 11:35
![](/profiles/img/10244-398-s.jpg)
Führe ich Selbstgespräche?
Upps, sorry - Ralf! 😳 Hmmm, das Alter kommt durch!
29 March 2013, 11:40
![](/profiles/img/10244-398-s.jpg)
If you were wondering, why there was no progress, have a look at pic no. 12 and compare right and left position light on the front fenders.
The offset of the molds is quite challenging sometimes. So I couldn't decide what to do until I made a decision today and cut off all the excess mold.
I also changed the door handles thanks to Ralf Schuster's advise (Thanks, Ralf). I hope they do look better now.
28 April 2013, 14:22
![](/profiles/img/13121-123-s.jpg)
Hi @ all... No problem Frank. Here is an example for you:
modellbau-magazin.de..hp?b=12012305RS10651
Btw... It´s 1:72. 😉
29 April 2013, 05:49
![](/profiles/img/10244-398-s.jpg)
Some more pics added. I tried something new - at least new for me as a brush-painter - preshading. I have no idea, if this will have any effect on the final result. We'll see.
1 May 2013, 13:47
![](/profiles/img/10685-859-s.jpg)
Mannomann. Always a pleasure to see your work, Frank. Bulbs in the headlights? I love your way to be crazy.
1 May 2013, 20:00
![](/profiles/img/11051-s.jpg)
Hahaha- Da gibt noch jemand Gas - Aber bei dem Teil hätte ich schon wieder die Krise...🙂
1 May 2013, 20:01
![](/profiles/img/10976-s.jpg)
Ja, ja! was son bischen Drath und Stecknadeln alles ausmachen können 🙂
1 May 2013, 20:11
![](/profiles/img/10244-398-s.jpg)
Thanks, guys! That's the motivation I need to get this one done.
@Roy: A bit more than 20 years ago I made a try with a badger airbrush and messed up a Tamiya Jagdpanther. So I decided that it is not my thing and continued with (H)airbrushes...
@Acki: Those big headlights looked so empty. What else should I do?😉
@Mike: Dein 8,8 Sd.Kfz.8 hat mich an den Basteltisch zurückgetrieben.
@Christian: Vor Ätzteil und Co. musste man sich was einfallen lassen. Scheint, da ist was hängengeblieben.
1 May 2013, 20:40
![](/profiles/img/12853-387-s.jpg)
looking good frank, i have always liked the Russian armored cars i wish a company would do a new mold of one of them.
1 May 2013, 22:03
![](/profiles/img/10244-398-s.jpg)
Thanks, William! I still do hope that MiniArt will hear the voices of Russian armour fans and do some BA-1, -3, -6, -10 based on their fantastic GAZ-AAA.
1 May 2013, 22:13
![](/profiles/img/12853-387-s.jpg)
thanks, frank i never thought about Miniart's GAZ-AAA might be able to kit bash that with the Eastern Express BA-6, add some photo-etch and a little elbow grease, might turn out a decent kit. now I'm going to be scouring Ebay
1 May 2013, 23:32
![](/profiles/img/10244-398-s.jpg)
Thanks guys! Yesterday it got his first coat of paint and looks different now. Just 2 parts to add and construction is finished. Let's see, where we'll get to.
2 May 2013, 17:22
![](/profiles/img/10244-398-s.jpg)
No, Holger! No progress on the 251. The BA-20 was planned as something within between to relax, but...
3 May 2013, 13:17
![](/profiles/img/13009-233-s.jpg)
I've never built tanks. But my eyes say, this looks good .....well done
3 May 2013, 17:59
![](/profiles/img/10923-723-s.jpg)
Hi Frank, I'm looking forward to the result of the pre-shading with brush, but you are a master of painting with brushes,so no worry mate, great result so far on this BA-20
Greetz Phil
4 May 2013, 06:47
![](/profiles/img/10244-398-s.jpg)
Thanks, guys, for your encouraging words.
@Philip: I've uploaded 3 more pics with the first result. The overall impression - uneven paintresult. The roof for sure must be painted once again. The other parts - I'm thinking about to leave it like it is with minor corrections, because it gives the BA-20 a used look. A coat with satin clear enamel should do it followed by washes and detail painting.
4 May 2013, 07:40
![](/profiles/img/10923-723-s.jpg)
That looks already fantastic Frank, keep us informed of the result of the paintjob!
This will be another beauty Frank😉 looking forward to the endresult
Greetz Phil
4 May 2013, 08:00
![](/profiles/img/10244-398-s.jpg)
Some update on detailing. I thinned the radiator covers and added the open-/closing mechanism made of household goods. Once assembled to the hood you don't see much anymore of the mechanism.
5 May 2013, 14:26
![](/profiles/img/12716-321-s.jpg)
Great detail! But you better turn the headlights off or you'll drain the battery😉
6 May 2013, 12:07
![](/profiles/img/10244-398-s.jpg)
Thanks for the hint, George! Turned off the lights and "took out" the battery...😉
6 May 2013, 15:50
![](/profiles/img/10244-398-s.jpg)
More pics added. Assembly is completed. Now the wheels still need some clear satin coat. Then I will do some weathering, but not so much.
10 May 2013, 18:07
![](/profiles/img/10244-398-s.jpg)
Well, last 3 pics added. Just a bit dirt added, no scratches or heavy weathering. Nothing to win any prices, but it looks good in the showcase. So that's it for me for the time being.
12 May 2013, 14:28
![](/profiles/img/12716-321-s.jpg)
You can't get any better than making it look like the real thing! Great build!
12 May 2013, 15:06
![](/profiles/img/12974-745-s.jpg)
Maybe you could put it in a diorama with a bit of soapy water on the car and the crew washing it?😉 But i still like it 🙂
12 May 2013, 15:06
![](/profiles/img/12630-641-s.jpg)
Well done frank looks grate how long ago did u finish this I been waiting to see it finished, really nice fine detail
12 January 2014, 13:58
![](/profiles/img/11224-741-s.jpg)
Moin Frank , gefällt mir absolut 👍 aber fahren wollte ich den nicht 🙂 , dann besser T 34 🙂 🙂 , welche Farben hast du verwendet ?? und , ist der Motor noch zugänglich ?
13 January 2014, 10:37
![](/profiles/img/10244-398-s.jpg)
Thank you, guys, that you like my old BA-20.
@Jens: Humbrol 150 musste als Grundfarbe dafür herhalten. Dann einen Überzug aus seidenmattem Klarlack, der die Farbe etwas abgedunkelt hat (zum Glück). Zum Motor muss ich passen. Die Ölwanne war in den Rahmen eingegossen und was man von vorn durch die Klappen sind, ist der Kühler - das einzige Detail im Motorraum.
13 January 2014, 17:20
![](/profiles/img/11224-741-s.jpg)
Danke , also Humbrol 150 abdunkeln und die Russen können kommen 👍
kann man für den BA - 20 nicht einen Mototset bekommen ? , sorry Schwermetall ist nicht mein Gebiet
13 January 2014, 17:38
![](/profiles/img/10244-398-s.jpg)
Ehrlich gesagt keine Ahnung, Jens. Das war mir der Bausatz auch nicht mehr wert. Vielleicht kommt ja MiniArt mal mit einer Neuauflage, obwohl die ja erst einmal mit BA-6 und BA-10 kommen könnten, die ja auf dem GAZ-AAA Fahrgestell aufbauen...
******************************************************************************
Hier noch...
Humbrol 150 noch ohne seidenmatten Klarlack, dafür mit schwarzer Grundierung...
[img1]
13 January 2014, 18:04
![](/profiles/img/108467-993-s.jpg)
Just found this same model at a second hand shop
Today
Great to get ideas
Thanks for sharing
20 February 2022, 12:08
![](/profiles/img/56165-775-s.jpg)
I'm sitting here admiring yours whilst waiting for the paint to dry on mine. You wouldn't know it was done by brush.
20 February 2022, 16:04
![](/profiles/img/10244-398-s.jpg)
JV, Rui, John: Thank you, guys! Great to see that you also have fun with this old kit.
20 February 2022, 23:13
Album info
Construction of the BA-20