General Atomics MQ-9 Reaper in Flight
![Album image #1 Album image #1](/albums/img/2/9/3/228293-20839-85-720.jpg)
Not much in-progress work to show. The kit goes together beautifully in a couple of hours.
![Album image #2 Album image #2](/albums/img/2/9/4/228294-20839-17-720.jpg)
Decided to upgrade with some Eduard Brassin GBU-12 weapons to replace the kit versions.
![Album image #3 Album image #3](/albums/img/8/0/5/228805-20839-76-720.jpg)
Top: painted and first coat of clear.
![Album image #4 Album image #4](/albums/img/8/0/6/228806-20839-56-720.jpg)
Bottom: Gear installed. Waiting for clear. The crude hole in the fuselage is where the stand will mount.
![Album image #5 Album image #5](/albums/img/1/4/3/229143-20839-38-720.jpg)
Decals are about 85% completed.
![Album image #6 Album image #6](/albums/img/7/0/8/229708-20839-79-720.jpg)
![Album image #7 Album image #7](/albums/img/7/0/9/229709-20839-46-720.jpg)
![Album image #8 Album image #8](/albums/img/7/1/0/229710-20839-64-720.jpg)
Very close to finished. Just need the prop-blurs, and it will be done. I don't usually do an 'in flight' model, but this one was so big, and different, it was a nice change of pace.
![Album image #9 Album image #9](/albums/img/7/1/1/229711-20839-98-720.jpg)
![Album image #10 Album image #10](/albums/img/9/5/8/229958-20839-81-720.jpg)
Working on the spinner and prop blur.
![Album image #11 Album image #11](/albums/img/2/3/0/275230-20839-25-720.jpg)
![Album image #12 Album image #12](/albums/img/2/3/1/275231-20839-43-720.jpg)
![Album image #13 Album image #13](/albums/img/2/3/2/275232-20839-92-720.jpg)
![Album image #14 Album image #14](/albums/img/2/3/3/275233-20839-76-720.jpg)
![Album image #15 Album image #15](/albums/img/2/3/4/275234-20839-48-720.jpg)
![Album image #16 Album image #16](/albums/img/2/3/5/275235-20839-35-720.jpg)
![Album image #17 Album image #17](/albums/img/2/3/6/275236-20839-89-720.jpg)
![Album image #18 Album image #18](/albums/img/2/3/7/275237-20839-76-720.jpg)
![Album image #19 Album image #19](/albums/img/2/3/8/275238-20839-35-720.jpg)
![Album image #20 Album image #20](/albums/img/2/3/9/275239-20839-47-720.jpg)
![Album image #21 Album image #21](/albums/img/2/4/0/275240-20839-52-720.jpg)
![Album image #22 Album image #22](/albums/img/2/4/1/275241-20839-52-720.jpg)
![Album image #23 Album image #23](/albums/img/2/4/2/275242-20839-87-720.jpg)
![Album image #24 Album image #24](/albums/img/2/4/3/275243-20839-40-720.jpg)
![Album image #25 Album image #25](/albums/img/2/4/4/275244-20839-61-720.jpg)
Commentaires
5 January 2016, 23:00
![](/profiles/img/20839-840-s.jpg)
Clifford, it is very unusual and a good departure from the complicated nature of most aircraft (no cockpit or engines to detail). It was a fun build. Quick. Easy. I could have done a better job, but it was just as a gap filler while I wait on the extra parts for my F-4C project to arrive.
11 January 2016, 00:31
![](/profiles/img/14091-428-s.jpg)
Looking good! I built the 1/72 version of the kit, which is fairly nice. The wing roots gave me problems on the bottom and there were sink marks on the bottom of the wings, but it was otherwise a quick build.
11 January 2016, 01:24
![](/profiles/img/21748-180-s.jpg)
Nice work! I'm really looking forward to seeing how the props turn out
11 January 2016, 02:21
![](/profiles/img/20839-840-s.jpg)
Bryce, I'm interested myself. We will see...hopefully soon. I'm ready to get started on the F-4 soon.
11 January 2016, 03:04
![](/profiles/img/21748-180-s.jpg)
I'm just about ready to close up the fuselage. I'll have the painting of the cockpit finished up today, at least I should.
11 January 2016, 13:03
![](/profiles/img/13695-917-s.jpg)
Bryce, are you building a F-4 right now? I have an F-4J on the work bench, hope to start applying decals tomorrow.
11 January 2016, 23:17
![](/profiles/img/20839-840-s.jpg)
All-right, this guy is finished! I kind-of like the prop-blurs and showing something unique like this in flight. I didn't like the way it looked on its spindly landing-gear anyway. I'm going to take a couple days off, then it's time to start the Phantom!
11 January 2016, 23:27
![](/profiles/img/21748-180-s.jpg)
I gotta say, Derek, they really don't look too bad. Do you think they'd handle being twisted a little bit to show some pitch?
Yes, Clifford. I'm in the Reddit group build with Derek. I'm doing Monogram's F-4C
12 January 2016, 00:40
![](/profiles/img/20839-840-s.jpg)
Bryce, this is the "new style" prop blur that comes attached to a hub. The original style were apparently just single blades that you glued onto the spinner, or whatever. I absolutely think they'd handle some significant bending and twisting. I sure bent them enough in the process of painting and installing them. I considered doing what you described, just didn't follow through.
12 January 2016, 02:03
![](/profiles/img/13695-917-s.jpg)
@Bryce I am going to do the group build with you and Derek. I will be doing the Academy F-4B. I thought I was the only one who still built Revell/Monogram F-4s LOL. I have a whole stack of them.
12 January 2016, 02:18
![](/profiles/img/20839-840-s.jpg)
Clifford, what is your reddit username and I will add you to the list?
12 January 2016, 02:28
![](/profiles/img/13695-917-s.jpg)
I will have to look and see, I don't remember. Haven't been there since my stroke. I will get back to you.
12 January 2016, 03:12
![](/profiles/img/20839-840-s.jpg)
Clifford, I just put you on the list and sent you a message in the thread in the modelmakers subreddit. So glad to have you!
12 January 2016, 04:05
![](/profiles/img/21748-180-s.jpg)
How did you secure them to the inside of the spinner? Just glue them to the fuselage and then attach the cone over it?
Welcome to the build, Clifford! I was gifted the kit specifically to join the groupbuild, though it's not a bad kit. The worst part of it, rescribing, is pretty much done.
12 January 2016, 13:17
![](/profiles/img/13695-917-s.jpg)
I have never tried to rescribe one, I just use pre-shading. Maybe I will try and re-scribe one now that I have a scribing tool.
12 January 2016, 18:39
![](/profiles/img/20839-840-s.jpg)
Bryce, the spinner is a two part affair. The PE prop blurs were on a hub, I just put them where the kit pars should go, and glued the spinner together. Easy.
12 January 2016, 23:49
![](/profiles/img/21748-180-s.jpg)
What scribing tool are you using, Clifford? I have the UMM scriber and RB Productions riveter. That riveter has made a world of difference for me.
They definitely look the part, Derek. A lot more than I expected them to.
13 January 2016, 01:13
![](/profiles/img/20839-840-s.jpg)
Bryce, I can certainly see your criticisms of them. What makes it work for this kit is two-fold. First, the prop is at the back so it is rarely seen from an angle that brings up the dimensional issues. Second, the prop is actually rather small in comparison to other 1/48 prop aircraft. To get closest to it's dimensional sizes I went with the 1/72nd scale prop blur instead of their 1/48th offering. The 1/72nd prop is about 1/4" too small in diameter (not as noticeable with a 3 blade as would be with a 2 or 4 blade prop), but is much closer in size than their 1/48 version that would be almost 3/4 of an inch too wide in diameter.
13 January 2016, 01:32
![](/profiles/img/13695-917-s.jpg)
I have a Tamiya scribing tool, I need to get a rivet making tool. I also use my pin vise with various sized sewing needles in it. That works good.
13 January 2016, 01:45
![](/profiles/img/21748-180-s.jpg)
I definitely can't critique anything on your Reaper. Just enough subtle weathering, the weapons look great. They do have some tiny-ass props.
Clifford, you're definitely going to want a real riveter at some point. I've redone probably a thousand rivets on the Phantom, and they're straight, for the most part. Something I couldn't do with a single needle
13 January 2016, 02:42
![](/profiles/img/13695-917-s.jpg)
Yes, I plan on getting a riveting tool, I have 2 Tamiya Harrier FSR-2s I want to try and re-scribe. What one would you recommend?
13 January 2016, 02:45
![](/profiles/img/21748-180-s.jpg)
I have this one - mmodelstore.com/rb-t010.aspx and the Trumpeter riveter. The Trumpeter one is garbage
13 January 2016, 02:51
![](/profiles/img/20839-840-s.jpg)
Thanks Mike. It's really a solid kit, and with little effort or skill turns into a respectable model.
14 January 2016, 00:38