FuSE 65 Würzburg Riese
Commentaires
11 November 2018, 20:34
![](/profiles/img/12423-559-s.jpg)
wellcome, it is 95% finish, nice work for an rainy weekend start on friday 🙂
11 November 2018, 20:53
![](/profiles/img/38460-541-s.jpg)
Wow! Looks very Good Axel! Very nice and accurate work with the PE-Parts 👍!
And i would guess you are one of very few who did this thing.
Glued or bughuntered er.. soldered i mean?😉
13 November 2018, 18:08
![](/profiles/img/12423-559-s.jpg)
I glued it, it's better for me, because on the last struts, it has no fixtures to hold for soldering. I have put everything first so that there are no tensions in the end
13 November 2018, 18:35
![](/profiles/img/38460-541-s.jpg)
Looks really great the construction.. How was the fit of the Resin Parts?
13 November 2018, 19:04
![](/profiles/img/12423-559-s.jpg)
die Hütte passt ganz gut, auf die Materialstärke achten, trocken anpasssen ist schon wichtig.
bei mir war es so das der Abstand zwischen den Aufnahmearmen für die Radarschüssel 2mm zuschmal war, entweder habe ich was falsch zusammen gebaut und/oder die Schrumpfung des Resin hat zugeschlagen. ich habe die Arme jeweils ca. 1mm nach aussen gesetzt, kann auch sein das ich die Ätzteile mit zuviel Spiel gebaut habe. Auf jedenfall die Arme nicht vorher ankleben, trotz des Fehlers kann ich meine Radarschüssel über das Zahnrad schwenken (sorry my english is not so good for translation)
the hut fits well, pay attention to the material thickness, dry-adjust is already important.
with me it was so that the distance between the receiving arms for the radar dish 2mm was too narrow, either I have built something wrong and / or the shrinkage of the resin has struck. I have put the arms each about 1mm to the outside, can also be that I have built the etched parts with too much play. In any case, do not glue the arms first, despite the error, I can swing my radar dish over the gear
13 November 2018, 19:39
![](/profiles/img/user-s.jpg)
Soon to start this one too... nice work so far, and thanks for the heads up...
14 November 2018, 11:19
![](/profiles/img/12423-559-s.jpg)
Thanks,
@Bart, if you need more info, please ask me, befor glue, dryfit the resin parts, importend for the PE radar dish to the receiving arms
14 November 2018, 12:57
![](/profiles/img/user-s.jpg)
well thought of starting with the dish first, then the housing etc... will you add the netting that forms the curve of the dish?
14 November 2018, 13:50
![](/profiles/img/12423-559-s.jpg)
Holgi danke, der HC wartet...
@Bart, no I don´t add the net, the the construction is ended
14 November 2018, 17:20
![](/profiles/img/21997-347-s.jpg)
Starkes Projekt 👍 Nur Schade, daß die Schüssel innen leer bleibt. Bei dem 1:35 Modell scalemates.com/kits/989974-s..se65-w-rzburg-riese-fmg39t-r ist ein feines Netz dabei, aber das läßt sich in 1:72 nur schwer machen. Transparentes Papier vielleicht?
14 November 2018, 18:27
![](/profiles/img/12423-559-s.jpg)
ich hatte mal an ein Teefilter oder Farbfliter (aus dem Lackierhandel) gedacht, aber alles nichts halbes und ganzes, das Wochenende darüber nachdenken 🙂
14 November 2018, 19:18
![](/profiles/img/38460-541-s.jpg)
Would this perhaps help you Axel?
[img1]
Got a lot of it in my studio at work and at home
14 November 2018, 19:48
![](/profiles/img/21997-347-s.jpg)
Ah, noch eine Idee: Damenstrumpfhose? Vielleicht kannst Du ja vorher die Maschenweite vom Original auftreiben und umrechnen. Laut den Bildern auf Wikipedia ist das schon sehr fein. In Greding steht noch so ein Teil.
14 November 2018, 19:48
![](/profiles/img/12423-559-s.jpg)
ich teste das von Daniel, sieht sehr fein aus, alternativ von Freundin die Nylon´s 🙂
14 November 2018, 20:42
![](/profiles/img/12423-559-s.jpg)
@bughunter vom orginal runterrechnen ist dann blickdicht 🙁 muss schon etwas gröbersein
14 November 2018, 20:44
![](/profiles/img/21096-573-s.jpg)
anyway, i would suggest to have a look at inoxia.co.uk/products/mesh , specially Woven Wire Mesh. 120 mess looks like Daniel stuff, but it is actually made of metal
14 November 2018, 21:19
![](/profiles/img/12423-559-s.jpg)
thanks for the link, 👍 daniel said it is an PS material
[img1]
this looks good
14 November 2018, 21:23
![](/profiles/img/38460-541-s.jpg)
yap it is a special gaze for hi-end Ribbon AMt tweeter we develop and produce.
It is like Axel says a PS mixture with carbonic and silvermaterial implemented.
14 November 2018, 21:23
![](/profiles/img/38460-541-s.jpg)
This is produced especially for us under patent in Indonesia and Japan. You cannot buy it, cause it is only to find in our material storage and at my home 🙂 but i would send you a 12,5cm x 25cm piece of web 👍
Give me your adress via PM (except Tonga or Christmas Islands 🙂 )
14 November 2018, 21:41