Mur
Wall
Steven Van Dyck
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
All comments (9) » 12 25 October, 01:17
Steven Van Dyck
I wanted to fix Dunkerque's deck. The hull is a bit narrow so I introduced a fitting piece of sprue before I glued the deck in. So there are no unnecessary tensions on the deck. The Shipyard watertight doors are replacing the kit ones, that are actually as detailed as the PE but I saw on pictures that these doors are all placed open. Some drilling is done to open up the doorways. The front of the conning tower should not have much of armour contrary to the rest of it, because only the internal communication channel is armoured. I therefore did not simply glue the PE plating on it, but removed the thick plastic first.
I wanted to fix Dunkerque's deck. The hull is a bit narrow so I introduced a fitting piece of sprue before I glued the deck in. So there are no unnecessary tensions on the deck. The Shipyard watertight doors are replacing the kit ones, that are actually as detailed as the PE but I saw on pictures that these doors are all placed open. Some drilling is done to open up the doorways. The front of the conning tower should not have much of armour contrary to the rest of it, because only the internal communication channel is armoured. I therefore did not simply glue the PE plating on it, but removed the thick plastic first.
10 November, 00:40
November 9, 2024
Steven Van Dyck
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
All comments (34) » 43 8 April, 00:28
Steven Van Dyck
Thanks, Mr James. I noticed that the black camo paint shows through the red decals, so I covered these with extra red paint. I also noticed that some Viggens seem to show black de-icing surfaces, though not all. I added it to the model as this was easy to mask. Then I added a gloss coat.
Thanks, Mr James. I noticed that the black camo paint shows through the red decals, so I covered these with extra red paint. I also noticed that some Viggens seem to show black de-icing surfaces, though not all. I added it to the model as this was easy to mask. Then I added a gloss coat.
9 November, 23:56
Steven Van Dyck
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
4 5 October, 10:18
Steven Van Dyck
Thanks. The frame is now assembled after removing of sinkmarks on both beams. These were not present on the four wheel truck frame that is still included. The first set of three SKP lights is added to the rear.
Thanks. The frame is now assembled after removing of sinkmarks on both beams. These were not present on the four wheel truck frame that is still included. The first set of three SKP lights is added to the rear.
14 October, 13:30
Steven Van Dyck
The axles are now added to the frame. Because Trumpeter wanted the springs to be workable, the shock absorbers are cut down. This will be repaired later. The cardans are drilled and softened with glue.
The axles are now added to the frame. Because Trumpeter wanted the springs to be workable, the shock absorbers are cut down. This will be repaired later. The cardans are drilled and softened with glue.
9 November, 23:29
November 8, 2024
Steven Van Dyck
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
All comments (66) » 60 11 July 2022, 22:40
Steven Van Dyck
I added the RT Diorama Large Wayside Cross to the dio. And then I burned down the church door with real fire, because it is made from wood that is possible and probably the most realistic "painting method"...
I added the RT Diorama Large Wayside Cross to the dio. And then I burned down the church door with real fire, because it is made from wood that is possible and probably the most realistic "painting method"...
8 November, 02:10
Steven Van Dyck
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
All comments (18) » 16 12 August 2023, 00:03
Steven Van Dyck
Welcome. I assembled the container in a few hours, an easy process if you wanted to show it closed down. But the option with open doors is incorrect and needs some changes to the locking system. I had done this with the right door, but it would make no sense to have the pallet loader blocked by the left door so I have to change that one too. I made a sketch of the design for the dio, though the cut might be more oblique to gain some volume.
Welcome. I assembled the container in a few hours, an easy process if you wanted to show it closed down. But the option with open doors is incorrect and needs some changes to the locking system. I had done this with the right door, but it would make no sense to have the pallet loader blocked by the left door so I have to change that one too. I made a sketch of the design for the dio, though the cut might be more oblique to gain some volume.
8 November, 01:28
November 7, 2024
October 27, 2024
October 25, 2024
Steven Van Dyck
possède cet article
possède cet article
5t Pallet Truck & Wooden Pallet with 200 Litre Oil Drum and Plastic Barrel
Gecko Models 1:35
35GM0034 2023 Nouvel outillage Multi sujets (3)25 October, 16:24
October 23, 2024
October 20, 2024
Steven Van Dyck
possède cet article
possède cet article
CH-47D Chinook interior 3D decals for Hobby Boss kit
Quinta Studio 1:48
QD48465 2024 Nouvel outillage 20 October, 20:43
Steven Van Dyck
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
7 19 October, 20:12
Steven Van Dyck
Pictures today include the visiting club stands and the contest from the first rows at the entrance until the military vehicles. Figures and planes will come tomorrow.
Pictures today include the visiting club stands and the contest from the first rows at the entrance until the military vehicles. Figures and planes will come tomorrow.
19 October, 20:16
Steven Van Dyck
The second part of my report is just posted, with more than 400 extra pictures. The Columbia won silver in masterclass and all returned home safely.
The second part of my report is just posted, with more than 400 extra pictures. The Columbia won silver in masterclass and all returned home safely.
20 October, 19:18
Steven Van Dyck
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
All comments (5) » 8 15 September, 19:12
Lost_Erik
Thanks for posting all of these! Good show.
Congratulations on best in show and the bronze recognition! 👍
Thanks for posting all of these! Good show.
Congratulations on best in show and the bronze recognition! 👍
16 September, 00:07
October 19, 2024
Steven Van Dyck
possède cet article
possède cet article
Olifant road wheels (correct dim/shape) Hobby Boss
Quickwheel 1:35
QW-X058 19 October, 18:05
October 17, 2024
October 5, 2024
October 4, 2024
Steven Van Dyck
marqué cet article comme sur commande
marqué cet article comme sur commande
US Navy Life Raft Racks, early Cold War (set of 35)
Model Monkey 1:400
400-LifeRaftRacks 2017 Nouvel outillage 4 October, 15:26
Steven Van Dyck
marqué cet article comme sur commande
marqué cet article comme sur commande
"Phasor 90" Paired-cone Antennas (set of 12) for Vietnam War-era ships.
Model Monkey 1:400
400-Phasor 90 2018 Nouvel outillage 4 October, 15:25
Steven Van Dyck
marqué cet article comme sur commande
marqué cet article comme sur commande
US Navy Floater Net Baskets Can be used as inserts for photo-etch baskets or by themselves.
Model Monkey 1:350
350-FloaterBaskts Multi sujets (11)4 October, 15:24
Steven Van Dyck
marqué cet article comme sur commande
marqué cet article comme sur commande
US Navy Floater Net Baskets Can be used as inserts for photo-etch baskets or by themselves.
Model Monkey 1:350
350-FloaterBaskts Multi sujets (11)4 October, 15:23
Steven Van Dyck
marqué cet article comme sur commande
marqué cet article comme sur commande
US Navy Floater Net Baskets Can be used as inserts for photo-etch baskets or by themselves.
Model Monkey 1:350
350-FloaterBaskts Multi sujets (11)4 October, 15:23
Steven Van Dyck
marqué cet article comme sur commande
marqué cet article comme sur commande
US Navy Floater Net Baskets Can be used as inserts for photo-etch baskets or by themselves.
Model Monkey 1:350
350-FloaterBaskts Multi sujets (11)4 October, 15:22
October 3, 2024
Steven Van Dyck
possède cet article
possède cet article
SA-13 GOPHER 9K 35 STRELA 10 / MT-LB / BMP23 / HOSTA / 2 S 1 GVODZIKA late type tracks.
Friulmodel 1:35
ATL-188 2020 Nouvel outillage 3 October, 09:50
Steven Van Dyck
possède cet article
possède cet article
Fouga CM.170 Magister - wheels set (weighted)
ResKit 1:48
RS48-0308 3 October, 09:49
September 30, 2024
Steven Van Dyck
possède cet article
possède cet article
Lenses and taillights for GTK Boxer
SKP model 1:35
SKP 232 30 September, 11:45
September 25, 2024
Steven Van Dyck
marqué cet article comme sur commande
marqué cet article comme sur commande
SA-13 GOPHER 9K 35 STRELA 10 / MT-LB / BMP23 / HOSTA / 2 S 1 GVODZIKA late type tracks.
Friulmodel 1:35
ATL-188 2020 Nouvel outillage 25 September, 11:55
Steven Van Dyck
marqué cet article comme sur commande
marqué cet article comme sur commande
Fouga CM.170 Magister - wheels set (weighted)
ResKit 1:48
RS48-0308 25 September, 11:53
September 20, 2024
September 19, 2024
Steven Van Dyck
marqué cet article comme sur commande
marqué cet article comme sur commande
Lenses and taillights for GTK Boxer
SKP model 1:35
SKP 232 19 September, 01:42
September 14, 2024
Steven Van Dyck
possède cet article
possède cet article
Canopy & Wheels Paint Masks for F-14A/D Tomcat 1/48 for Tamiya kits
DN Models 1:48
48/827-102 2021 Nouvel outillage 14 September, 19:11
Steven Van Dyck
possède cet article
possède cet article
3D Resin Print: Large Wayside Cross
RT-Diorama 1:35
35405 14 September, 17:03
September 10, 2024
September 6, 2024
September 5, 2024
September 3, 2024
August 30, 2024
August 29, 2024
August 21, 2024
August 17, 2024
August 10, 2024
Steven Van Dyck
possède cet article
possède cet article
AH-64 Apache M230 chain gun barrel (30mm), pitot tubes & tail antenna
Master 1:72
AM-72-109 2016 Nouvel outillage 10 August, 08:08
Steven Van Dyck
possède cet article
possède cet article
Paint Mask for MT-LB (clear parts & wheels) Trumpeter
KAV models 1:35
KAV M35 062 2017 Nouvel outillage 10 August, 08:08
August 8, 2024
August 7, 2024
August 6, 2024
Steven Van Dyck
marqué cet article comme sur commande
marqué cet article comme sur commande
Paint Mask for MT-LB (clear parts & wheels) Trumpeter
KAV models 1:35
KAV M35 062 2017 Nouvel outillage 6 August, 14:28
Steven Van Dyck
marqué cet article comme sur commande
marqué cet article comme sur commande
AH-64 Apache M230 chain gun barrel (30mm), pitot tubes & tail antenna
Master 1:72
AM-72-109 2016 Nouvel outillage 6 August, 14:27
August 5, 2024
August 1, 2024
Steven Van Dyck
possède cet article
possède cet article
World Architecture Series
The Parthenon Athenian Acropolis 348 b.c. Italeri 1:100
68001 2015 Nouvel outillage 1 August, 14:38
wnolder.php?lang=fr
2024-08-01 14:38:55
2014-05-15 21:19:56
15656
/ajax/wnolder.php?lang=fr&sd=2024-08-01 14:38:55&md=2014-05-15 21:19:56&filter=&w=15656
todo