Panzer III Ausf. G (DAK version)

1
February 13, 2022
The Pz. III ‘114’ from 5 Leichter Div. and it was depicted as the box art of Dragon 9032.
2
February 17, 2022
A team of Pz. III from 5 Kp. of 15 Pz. Div..

The one in the front was a late version of Pz. III G (or maybe initial production of type H) as I realized the vehicle’s drive sprocket was thicker, first return roller was a little bit far from the second return roller, and a 30mm armor plate was mounted on front superstructure. The second Pz. III in line was definitely a type H.
3
February 14, 2022
The Pz. III G issued to 1 Kp. of 15 Pz. Div..

There was another possibility that the Pz. III in above picture was an initial/early production of type H, many of the early version Pz. III H still used the drive sprockets and idle wheels which applied on Pz. III E/F or G.
4
October 6, 2024
A group of African colonial soldiers served for Italian troops were standing in front of a Pz. III G (or H) from 15 Pz. Div.. The mounted extra armors were very clearly to see in the photo.

Sometimes it is hard to classify the late G and early/mid H, because of most components for Pz. III G and H could be shared in usage, especially under some emergency cases.
5
February 12, 2022
The wreck of Pz. III G from 15 Pz. Div., the tires of road wheels were burned to ashes.

I believed engineers in frontline made some modifications on this vehicle. The vehicle should be an early production G due to the old style cupola and evenly distributed return rollers, however, an extra armored plate was mounted on front superstructure.
6
September 25, 2024
The wreck of early production Pz. III G. All features were significant, such as the early version cupola, evenly distributed return rollers.
7
February 12, 2022
Some destroyed Pz. III G’s of 15 Pz. Div.. The tactical NO. could be clearly seen on the right side of turret; no 30mm extra armor was mounted on the front plate.
8
February 12, 2022
The wrecks of Pz. III G’s were inspected by British.

Interestingly, both the DAK palm tree and insignia of 15 Pz. Div. were printed on the left side of vision port.

The photo was probably taken during May to November of 1941.
9
February 14, 2022
This Pz. III G from 5 Kp. was burned out, even the storage bin on turret was fully fell off.

Not far from these two Pz. III G, we can see a damaged Pz. III H (top right corner on photo).
10
February 13, 2022
11
February 13, 2022
12
February 13, 2022
13
February 13, 2022
14
February 13, 2022
15
February 13, 2022
16
February 13, 2022
17
February 13, 2022
18
February 13, 2022
19
February 13, 2022
20
February 13, 2022
21
February 13, 2022
22
February 15, 2022
Top coat: RAL8000 + Khaki
23
February 15, 2022
24
February 15, 2022
25
February 15, 2022
26
February 15, 2022
27
February 15, 2022
28
February 15, 2022
29
February 15, 2022
30
February 15, 2022
31
February 15, 2022
32
February 15, 2022
33
February 17, 2022
Track assembly was done.
34
February 17, 2022
35
February 17, 2022
36
February 17, 2022
Almost complete.
37
February 17, 2022
38
February 17, 2022
39
February 17, 2022
40
February 17, 2022
41
February 17, 2022
42
February 25, 2022
It was finished.
43
February 25, 2022
44
February 25, 2022
45
February 25, 2022
46
February 25, 2022
47
February 25, 2022
48
February 25, 2022
49
February 25, 2022
50
October 1, 2023
51
October 1, 2023
52
October 1, 2023
53
October 1, 2023
54
October 1, 2023
55
October 1, 2023
56
September 23, 2024
Done! Another one was finalized.
57
September 23, 2024
58
September 23, 2024
59
September 23, 2024
60
September 23, 2024
61
September 23, 2024
62
September 23, 2024
63
September 23, 2024

Commentaires

21 12 February 2022, 18:21

13 February 2022, 06:00

J D
Thx, Villiers de Vos. As the original decal sheet (114 & white cross) was cracked up, I choose to build a Pz. III G of 15 Pz. Div..

13 February 2022, 06:48

Audrius N
hi.nice start. anyway are you going to leave that molding seam on the barrel?

14 February 2022, 07:16

J D
Hi, Audrius.

The plastic sprue of Dragon red box is not very friendly to me, some seam lines are not easy to remove. As you said the seam line on barrel, I have used the sandpaper to polish it multiple times, but it seemed that the line could not be fully removed. The dragon red box did not provide a complete gun barrel, instead they equally cut the barrel into two pieces, so modelers need to glue these two pieces of half barrel together. Moreover, the plastic was very crispy and easily to be cracked, so I could not sand them very hardly. Maybe I should replace the manlet and barrel by using some resin and metal components.

14 February 2022, 08:10

Audrius N
if you removed the seam and polished after, so this is just visual effect now. After the coat of prime most probably it will be gone. Of course if you have metal barrel , that would be best option. good luck with the build

14 February 2022, 08:44

J D
Hi, Audrius. I still prefer the metal barrel because it really looks amazing.

Unfortunately, many metal and resin products are unavailable in the market of mainland China.

Currently, I am trying to purchase the product of DEF (DM35107), but the seller tells me that the lead time is approximately 2 months after buyer places orders.

14 February 2022, 10:55

Project info

Pz.Kpfw. III Ausf. G (Late Production)

63 images

1:35

Terminé

1:35 PzKpfw. III Ausf. G (Tp) (Dragon 9032)

1:35 Tropical Panzer Crew (Tristar 35009)

German Tankmen

Wehrmacht Heer (German Army 1935-1945)
Afrikakorps
World War 2»North Africa Campaign - North Africa

Tous les albums

Voir tous les albums »