Hírfolyam
Christian Bruer
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
27 képek
David and Goliath in North AfricaÚj: 17 August, 19:05 1:72
Projekt: David and Goliath in North Africa
46 7 July, 19:36
Christian Bruer
When I got a photo showing a Pz. I towing a Ju-87, possibly on an airfield in North Africa, I definetely want to build that scenery. The Pz. I is a mix of parts from S-Model Pz. I Ausf. A and B, the Ju-87 is Italeri. I bought some Quickboost add on parts which are designed to fit the Airfix kit, but with slightly modifications they although fit quite well the Italeri kit.
Happy Modelling, Christian
When I got a photo showing a Pz. I towing a Ju-87, possibly on an airfield in North Africa, I definetely want to build that scenery. The Pz. I is a mix of parts from S-Model Pz. I Ausf. A and B, the Ju-87 is Italeri. I bought some Quickboost add on parts which are designed to fit the Airfix kit, but with slightly modifications they although fit quite well the Italeri kit.
Happy Modelling, Christian
7 July, 19:44
Alec K
I saw (likely) the same photo and also thought it would make a great dio. Glad it will materialize in your capable hands Christian 👍
I saw (likely) the same photo and also thought it would make a great dio. Glad it will materialize in your capable hands Christian 👍
9 July, 00:05
Christian Bruer
Still enough place in the first row, welcome aboard Łukasz and Christian 🙂
Still enough place in the first row, welcome aboard Łukasz and Christian 🙂
10 July, 19:13
Christian Bruer
Nearly there, just a few bits and pieces to add before I can start the paintwork.
I got the SSMODEL Pz.I tracks. So far as can be see still in their printing frame they are looking quite nice.
Happy Modelling
Christian
Nearly there, just a few bits and pieces to add before I can start the paintwork.
I got the SSMODEL Pz.I tracks. So far as can be see still in their printing frame they are looking quite nice.
Happy Modelling
Christian
21 July, 11:32
Tom B.
Looking neat so far! Where did you order those 3D parts from? Been curious about those for a while now...
Looking neat so far! Where did you order those 3D parts from? Been curious about those for a while now...
21 July, 11:34
Christian Bruer
Thank you Tom and Alec. SSMODEL only has a shop at AliExpress. I was a bit hesitant to order there, because there is a lot of rumor about piracy products over there. But once I did not found something similar I want to order from them I registered and ordered at AliExpress. Payment was easy via PayPal and delivery absolutely in time. I also ordered one of the SSMODEL vehicles, Marder III Sd.Kfz.139 SSMODEL 1:72 72725. The details are top notch, but the printing quality in between excellent and poor. The chassis, tracks and single parts are excellent, but the gun mount and gun shield are not so nice. The gun mount is warped and the gun shield has a lot of steps on the inner and outer side. It also differs from the instructions where gun mount and shield are shown as separate parts but it was delivered as a single part. That makes it even more complicated to solve the issues. But I think I will give it a try for another scale 1/72 kit in the future.
Here the link to the shop:
de.aliexpress.com/st..ain.2.72a2xoWPxoWPcN
Thank you Tom and Alec. SSMODEL only has a shop at AliExpress. I was a bit hesitant to order there, because there is a lot of rumor about piracy products over there. But once I did not found something similar I want to order from them I registered and ordered at AliExpress. Payment was easy via PayPal and delivery absolutely in time. I also ordered one of the SSMODEL vehicles, Marder III Sd.Kfz.139 SSMODEL 1:72 72725. The details are top notch, but the printing quality in between excellent and poor. The chassis, tracks and single parts are excellent, but the gun mount and gun shield are not so nice. The gun mount is warped and the gun shield has a lot of steps on the inner and outer side. It also differs from the instructions where gun mount and shield are shown as separate parts but it was delivered as a single part. That makes it even more complicated to solve the issues. But I think I will give it a try for another scale 1/72 kit in the future.
Here the link to the shop:
de.aliexpress.com/st..ain.2.72a2xoWPxoWPcN
21 July, 14:08
Tom B.
Thanks for the reply, Christian 👍 It seems that their shop is one of the reliable outlets, then...nice!
Thanks for the reply, Christian 👍 It seems that their shop is one of the reliable outlets, then...nice!
22 July, 12:40
Bernd Grün
It turns out very well, Christian. 👌 Looking with interest for the final result.
It turns out very well, Christian. 👌 Looking with interest for the final result.
25 July, 07:07
Christian Bruer
Thank you all for your kind feedback 🙂
Meanwhile I have added a few more details like the steering gear and tilger for the flaps. I also painted and reworked the SSMODEL tracks. They need a slightly adjustment to fit well the the S-Model Pz.I. MOre photos sooon when I start the paintwork.
Happy Modelling, Christian
Thank you all for your kind feedback 🙂
Meanwhile I have added a few more details like the steering gear and tilger for the flaps. I also painted and reworked the SSMODEL tracks. They need a slightly adjustment to fit well the the S-Model Pz.I. MOre photos sooon when I start the paintwork.
Happy Modelling, Christian
26 July, 20:50
Christian Bruer
WIP painting the Ju-87. Underside in RLM65 Hellblau is done as well as RLM70 Schwarzgrün. Depicting the references I have, the paint seems to have a weathered look, which I took in consideration by highlighting the basic paint.
Next will be the camo with RLM71 Dunkelgrün and a white band on the rear of the fuselage.
Happy Modelling
Christian
WIP painting the Ju-87. Underside in RLM65 Hellblau is done as well as RLM70 Schwarzgrün. Depicting the references I have, the paint seems to have a weathered look, which I took in consideration by highlighting the basic paint.
Next will be the camo with RLM71 Dunkelgrün and a white band on the rear of the fuselage.
Happy Modelling
Christian
14 August, 18:25
Christian Bruer
Thank you Christian and Moreno🙂
WIP on my Ju-87 scenery. I rrplaced the First to Fight Pz.I by the one from S-Model but replaced the tracks by 3D printed ones from SSMODEL.
That will come together nicely with a nice contrast in between all of the colours, sand brown Pz.I and the Ju-87 with a standard camouflage in green.
Happy Modelling
Christian
Thank you Christian and Moreno🙂
WIP on my Ju-87 scenery. I rrplaced the First to Fight Pz.I by the one from S-Model but replaced the tracks by 3D printed ones from SSMODEL.
That will come together nicely with a nice contrast in between all of the colours, sand brown Pz.I and the Ju-87 with a standard camouflage in green.
Happy Modelling
Christian
15 August, 18:23
Christian Bruer
Thank you Lukas 🙂
There is a lot of masking needed to paint the Ju's splinter camouflage.
I did not masked and sprayed it in one loop, but step by step. For me it works much better in that way.
Only the rear fuselage and tail end is missing. So I have a plan for tomorrow 😁
Happy Modelling
Christian
Thank you Lukas 🙂
There is a lot of masking needed to paint the Ju's splinter camouflage.
I did not masked and sprayed it in one loop, but step by step. For me it works much better in that way.
Only the rear fuselage and tail end is missing. So I have a plan for tomorrow 😁
Happy Modelling
Christian
17 August, 19:06
MoJo
elkezdte ezt
elkezdte ezt
Hitachi Vibratory Combined Roller ZC50C-5 Construction Machinery Combined
Hasegawa 1:35
66002 (WM02) 2017 Új eszköz 18 August, 04:46
Rando
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
63 26 February, 14:43
Rando
Been cooking up this idea since I got the 1/72 RF-8. My original plan was to build the plane in the cover of the Osprey RF-8 book, flown by Lt Andre Coltrin over Vietnam. With a little help from a 1/72 version of the Furball MiG Master sheet, I will rearrange the nose and tail numbers to make BuNo 146871 as it flew in Vietnam during its 1966 cruise off the USS Oriskany.
I also found an Academy F-8E, which has decals for a VF-111 jet that flew on the same cruise, so decided I will build it as the RF-8's escort, which they often had during their photo runs. I also figured, why not build them together? They will be displayed in flight.
Been cooking up this idea since I got the 1/72 RF-8. My original plan was to build the plane in the cover of the Osprey RF-8 book, flown by Lt Andre Coltrin over Vietnam. With a little help from a 1/72 version of the Furball MiG Master sheet, I will rearrange the nose and tail numbers to make BuNo 146871 as it flew in Vietnam during its 1966 cruise off the USS Oriskany.
I also found an Academy F-8E, which has decals for a VF-111 jet that flew on the same cruise, so decided I will build it as the RF-8's escort, which they often had during their photo runs. I also figured, why not build them together? They will be displayed in flight.
26 February, 22:47
Rando
Good to have you gents, looking to start this one soon! I like researching and adding reference photos, so I just added some in the meantime.
Good to have you gents, looking to start this one soon! I like researching and adding reference photos, so I just added some in the meantime.
29 March, 13:32
Jos Jansen
Normally I don't follow 1:72 scale models...for this one I'll make an exception...😅😉, grab myself a seat here! Love those Crusaders...
Normally I don't follow 1:72 scale models...for this one I'll make an exception...😅😉, grab myself a seat here! Love those Crusaders...
23 April, 12:53
Patrick Hagelstein
Got intrigued by Rando's comment on Jos' build, so I popped over here. Looks like a very interesting build as well!
Got intrigued by Rando's comment on Jos' build, so I popped over here. Looks like a very interesting build as well!
23 April, 13:10
Rando
Happy to have you gents here, I'll be getting to this one just as soon as my elaborate P-51 build is done...
Happy to have you gents here, I'll be getting to this one just as soon as my elaborate P-51 build is done...
24 April, 14:14
Rando
Here we go, double Crusader build. Gonna be comparing the short-run Sword RF-8 with Academy's F-8, which has been the go-to in 1/72. I have extra Academy kits so I'm swapping out the RF-8 kit's nice resin seat, I'll use it for a future open canopy build. The pilots will be obscuring seat detail in a closed canopy anyway.
Here we go, double Crusader build. Gonna be comparing the short-run Sword RF-8 with Academy's F-8, which has been the go-to in 1/72. I have extra Academy kits so I'm swapping out the RF-8 kit's nice resin seat, I'll use it for a future open canopy build. The pilots will be obscuring seat detail in a closed canopy anyway.
15 May, 03:54
Rando
Welcome David!
I assembled the PJ pilots and started nipping off parts to assemble the fuselage. Getting the pilots to fit in their seats is tricky so far. Fit on the Academy kit parts is pretty nice. Sword kit is not as easy since there's no locator pins but they align well
Welcome David!
I assembled the PJ pilots and started nipping off parts to assemble the fuselage. Getting the pilots to fit in their seats is tricky so far. Fit on the Academy kit parts is pretty nice. Sword kit is not as easy since there's no locator pins but they align well
19 May, 04:25
Rando
Pilots are fully painted now. The F-8E pilot is based on Dick Schaffert, who was a pilot on this 1966 cruise. While I don't know of any specific plane he flew, F-8 pilots often flew jets that were assigned to others, so he's flying 149180 on this escort mission. In order to accommodate them, I had to remove the rudder pedals and front of the cockpit tub on the F-8E. It won't really be visible when the cockpit is buttoned up anyway.
Pilots are fully painted now. The F-8E pilot is based on Dick Schaffert, who was a pilot on this 1966 cruise. While I don't know of any specific plane he flew, F-8 pilots often flew jets that were assigned to others, so he's flying 149180 on this escort mission. In order to accommodate them, I had to remove the rudder pedals and front of the cockpit tub on the F-8E. It won't really be visible when the cockpit is buttoned up anyway.
27 May, 14:17
Rando
I didn't like how the Sundowner helmet turned out so I stripped the paint and airbrushed it this time with tiny wedges of tape, then shaped and touched up everything. Just need to add a black stripe for the visor groove.
I didn't like how the Sundowner helmet turned out so I stripped the paint and airbrushed it this time with tiny wedges of tape, then shaped and touched up everything. Just need to add a black stripe for the visor groove.
29 May, 03:49
Rando
Thanks and glad to have you J35J! Pilots, seats, ejection handles, and joysticks are all in place. Time soon to start putting the jets together.
Thanks and glad to have you J35J! Pilots, seats, ejection handles, and joysticks are all in place. Time soon to start putting the jets together.
31 May, 04:40
Rando
Hello Guy, welcome 😊
Fuselages are together. Now getting all the panels and gear bay doors to sit flush.
Hello Guy, welcome 😊
Fuselages are together. Now getting all the panels and gear bay doors to sit flush.
8 June, 04:20
Rando
Thanks Calvin! It's quite nice if you remember it's a short run kit and you prep and test fit parts a lot before gluing anything. Has been a far from perfect first effort by me but I like how it goes together. It's shape is pretty accurate too. The Academy kit is very plug-n-play in comparison
Thanks Calvin! It's quite nice if you remember it's a short run kit and you prep and test fit parts a lot before gluing anything. Has been a far from perfect first effort by me but I like how it goes together. It's shape is pretty accurate too. The Academy kit is very plug-n-play in comparison
8 June, 19:52
Rando
Welcome S M! I have been painstakingly installing the gear doors closed. Stuffing blutack in the wheel wells helps with frustration. Both F-8s have tiny aft gear doors on the main bays that took a lot of time to line up. The RF-8's nose doors were also very tricky. Happy to say I'm done getting the gear doors on.
Welcome S M! I have been painstakingly installing the gear doors closed. Stuffing blutack in the wheel wells helps with frustration. Both F-8s have tiny aft gear doors on the main bays that took a lot of time to line up. The RF-8's nose doors were also very tricky. Happy to say I'm done getting the gear doors on.
22 June, 04:14
Casey Beckett
Me too - Bonanza gear struts. God bless Albion Alloys. Great stuff if you've not used any of their items.
Me too - Bonanza gear struts. God bless Albion Alloys. Great stuff if you've not used any of their items.
23 June, 19:39
Rando
I have not but am always looking to add new things in this hobby, I'll check them out! I actually have an old Minicraft 1/48 Bonanza that I might do something with one of these days.
I have not but am always looking to add new things in this hobby, I'll check them out! I actually have an old Minicraft 1/48 Bonanza that I might do something with one of these days.
23 June, 20:49
Rando
Took a big long tour on the clear parts struggle bus this past week. Got glue smudges on a camera window, the windscreen, and canopy on the RF-8, which all had to be buffed out. Hopefully I get the canopies attached snug without issues tomorrow night. Finding that carefully lining the attachment point with Revell Contacta on a toothpick is less risky than TET.
Took a big long tour on the clear parts struggle bus this past week. Got glue smudges on a camera window, the windscreen, and canopy on the RF-8, which all had to be buffed out. Hopefully I get the canopies attached snug without issues tomorrow night. Finding that carefully lining the attachment point with Revell Contacta on a toothpick is less risky than TET.
28 June, 03:57
Michael Kohl
Like the planes. Like to see them in flighr. Like the effort you put in.
Feel you when putting pilots properly in and closing wheel well doors.
Anxious for the paint job.
Like the planes. Like to see them in flighr. Like the effort you put in.
Feel you when putting pilots properly in and closing wheel well doors.
Anxious for the paint job.
1 July, 04:07
Rando
Thanks all, getting closer to painting. A ton of work has gone into smooth out and scribe the lines around the gear bays on both jets, not to mention persistent seams. Also turned my attention to sanding down and rescribing the fictitious bumps on the folding joints, which the RF-8 has as well. The RF-8 also has wedge-shaped plates on the droops, which were only present much later, so those were sanded down as well. There's still a few things I want to try to perfect before I begin painting. I also have to decide if I want to paint the wings separately, in all likelihood I'm going to glue them on first because I want the fuselage section to be flush.
Thanks all, getting closer to painting. A ton of work has gone into smooth out and scribe the lines around the gear bays on both jets, not to mention persistent seams. Also turned my attention to sanding down and rescribing the fictitious bumps on the folding joints, which the RF-8 has as well. The RF-8 also has wedge-shaped plates on the droops, which were only present much later, so those were sanded down as well. There's still a few things I want to try to perfect before I begin painting. I also have to decide if I want to paint the wings separately, in all likelihood I'm going to glue them on first because I want the fuselage section to be flush.
21 July, 02:23
Rando
Alright, wings are on. I feel like this will make masking more complicated, but better for making sure they conform to the fuselage. I am so ready to paint these jets
Alright, wings are on. I feel like this will make masking more complicated, but better for making sure they conform to the fuselage. I am so ready to paint these jets
8 August, 03:55
Nicolas
I missed this one, following. I love these side by side builds.
Great progress so far. 👍
I missed this one, following. I love these side by side builds.
Great progress so far. 👍
9 August, 05:14
Rando
Hi friends three months later I'm finally painting the damn things. Here's my current take on preshading, blackbasing, what have you. Gave the white areas a white base that I preshaded with dark gull grey. Then mottled the black with white for some variation with the light gull grey. Elsewhere I built the missiles, launch rails, and painting the horizontal stabs.
Hi friends three months later I'm finally painting the damn things. Here's my current take on preshading, blackbasing, what have you. Gave the white areas a white base that I preshaded with dark gull grey. Then mottled the black with white for some variation with the light gull grey. Elsewhere I built the missiles, launch rails, and painting the horizontal stabs.
16 August, 04:18
Thomas Kolb
Coming along nicely! Your blackbasing tedhnique looks very effective, I am curious how they will turn out!
Coming along nicely! Your blackbasing tedhnique looks very effective, I am curious how they will turn out!
16 August, 05:04
Calvin Gifford
Great EBay find! And inexpensive for what they are. I will be using these for a couple of Hasegawa Tomcat builds and those pylons will eventually find their way to my old Monogram F-14's that didn't come with shoulder pylons.
Great EBay find! And inexpensive for what they are. I will be using these for a couple of Hasegawa Tomcat builds and those pylons will eventually find their way to my old Monogram F-14's that didn't come with shoulder pylons.
1 18 August, 04:22
Rick402
akarja ezt
akarja ezt
VW Kübelwagen/Schwimmwagen VW Type 82 Kübelwagen (1940-45)/VW Type 128/166 Schwimmwagen...
Chris McNab
2015 18 August, 04:18
SwissCheese33
akarja ezt
akarja ezt
Pz.Kpfw. V
Panther A Late 2 in 1 (Sd.Kfz.171/268) w/o Interior Das Werk 1:35
DW35011 2019 Új alkatrészek 18 August, 04:14
Calvin Gifford
megszerezte ezt
megszerezte ezt
USAF F-4 Ghost Undercarriage For Hasegawa New Tool F-4 (C,D,E,F,G) Phantom II
Yao's Studio (Lao Yao) 1:72
LY72269B 2023 Új eszköz 18 August, 04:14
Dimitrios Balanos
megszerezte ezt
megszerezte ezt
Hand-to-hand fight German & British Infantrymen WWI era.
Master Box (MB) 1:35
MB35116 2016 Új eszköz Több téma (2)18 August, 04:10
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=hu
35
35
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo