Hírfolyam

Hanno Kleinecke
Checkin' in, let the show begin !

Patrick Hagelstein
Bring it on! 👍🏼

Florian H.
Erste Reihe🙂

Michael Kohl
Ich natürlich auch.

Spanjaard
i am in 🙂

Melgg Lütschg
That's interesting 🙂

Alec K
Another Bernhard extravaganza, I am in 👍

Tom Spiegelberg
So, schnell ein Glas guten Wein holen und dann nehme ich gerne Platz.

Robert Podkoński
Taking a seat!

Sergej I
Following 👍

Bernhard Schrock
You are welcome. As usual a lot of first rows free! Popcorn for all! 🙂

Dietmar Bogatzki
Schnell noch eine Cola geholt und Platz genommen, Bernhard 🙂

Felix Troschier
Da gucke ich doch mal mit

Harry Eder
Ich schließe mich da mal an

CaptGPF
Sitting down to watch the extreme detailing build!

David Taylor
Back in.

JAM-SCREW
Fantastic - looking forward to seeing it unfold!

Gary Victory
Nice start Bernhard.

Hans-Jürgen Haag
Nice start 👍👀

Robert
Following 👍

J35J
Wow! Great start👍🏻

bughunter
What a combination: a great new kit, nice accessories and finally a master modeller at the tools - EPIC !

Bernhard Schrock
🙂🙂🙂🙂🙂 Thanks!

JAM-SCREW
Lovely extra details and mods! very tidy Bernhard.

Bernhard Schrock
Thank you JAM-SCREW.
Btw: just I saw you actual portfolio of sets for the Seaking! SCM Brand: JAM-SCREW
Absolutely remarkable!! I'm looking forward especially for the landing gear and main rotor hub. 🙂

Qwertzel
Gute Arbeit! Nehme Platz.

Mid Franconian
I take a seat as well!

Hanno Kleinecke
Just look at that winchframe !!! There is absolutely no doubt that after plugging these plugs the winch will be working. As with all your builds, for the watchers the path is the destination.
Wonderful wip pics - keep'em coming…… 🙂 👍

JAM-SCREW
Rapid progress sir! Very impressive attention to even very fine details for accuracy. Thank you for the updates and images.

Guy Rump
Following with interest. 👍

Spanjaard
that winch is jaw dropping... amazing.

gorby
WOW! Remarkable work so far.

Michael Kohl
What the hell is Ureol?

Bernhard Schrock
Michael ureol is A kind of foamed plastic. It comes in different degrees of foaming. The more foamed, the softer and lighter.

Robert
Hallo sieht genial aus.
wo bekommt man sowas ? habe auch schon versucht sowas zu finden.

Michael Kohl
Ah, that explaines as well the nice texture the cushions have. Thanks for the info.
And - by the way - as always a pleasure to follow your delicate modelling.

Bernhard Schrock
Your are welcome.
Robert: vor paar Jahren habe ich von einem Modellbaubekannten Reste zum probieren gekriegt. Daher musste ich erst mal schauen, wo man das kriegt: eBay hier und da so wie bei Modulor in Berlin.

Gordon Sørensen
Great looking detail you are adding, Berhard! Those seat cushions are fantastic.

Florian H.
Vergiss nicht, einen Kasten Bier bereitzustellen, wenn du die bordtoilette nutzt 😉

Lode Schildermans
Absolute masterclass in progress, Bernhard

bughunter
Eine Detailorgie allererster Kajüte 👍

Spanjaard
a bit more additions, and you can forget about buying kits 😉

Bernhard Schrock
Thanks for comments and praise.I would like to share the praise with the excellent photographers (TN and BD). Ä Only such photos as from TN and BD make it possible.🙂

David Taylor
Wow.

bughunter
It was probably difficult to wire all the little rotary switches on the back. I assume that they all work!

Dan Parsons
Just absolutely fantastic Bernhard, I dont think everyone will appreciate just how difficult all those details you have added are to do. you have achieved what I only dreamed of achieving. I am lost for words with these details. Stunningly beautiful work.

Bernhard Schrock
Thank you David, bughunter and Dan for you very motivating comments🙂. The Seaking is meanwhile my favorite helicopter. It was great to see one of them flying over the beach in Boltenhagen: we went on vacation there last year.🙂🙂

Bruce Huxtable
I am impressed not only by your skills, Bernard, but also that you are not over-whelmed by the many, many fine details that you are taking on. RESPECT 🙂

Alec K
I agree with Bruce. Inspiring progress 👍

Augie
Awesome work!

Bruce Huxtable
Goodness, Bernhard, another micro-kit! Immaculate, inspiring!

Augie
I'm just in awe, master work here.

Hanno Kleinecke
Last monday I had the chance to take a very close look on all these masterpiece subassemblies in person - an all new level of depth in detail, even by Bernhard's standards !
These oxygen bottles look as if they were very closely related to 500 pound bombs….. ? 🙂

Bernhard Schrock
I'm happy that you like my bottles... 🙂. In fact, I have often used bombs as a basis for various parts. 🙂 This time, however, it is a sprue with a diameter of 4 mm.

Dietmar Bogatzki
Awesome work, Bernhard 👍

ScaleFella NAFO
Tuned in! amazing details

Michael Kohl
Some very fine modelling going on here.

Spanjaard
very best kind of modelling 😉

gorby
The level of detail is mad. amongst the best scratch-building I have ever seen on Scalemates.

Mark Snel
Amazing!

Alec K
Excellent progress. I like how in Germany, when helicopter model parts get mailed, one just has to write "Bernhard" on the box and it gets delivered to the right person… 😉 😄

gorby
😄 😄 😄

Hanno Kleinecke
I'm out of superlatives ! What can one say - you are constantly exceeding your own standards with this build, and that really says something !
Deeply stunned and impressed by your R.O. workstation !

JAM-SCREW
Well, first test is passed - package arrived. Second test passed looks in good condition. 😋. Now is the real test. How does the builder feel about the parts and are they suitable for this unbelievably excellent project.... time will tell.🍻

Spanjaard
one thing is for sure, they could not get to better hands 😉

David Taylor
JAM-SCREW.How big is your production facilities,you might need bigger premises as your products look great albeit in the hands of a master modeller.

bughunter
Wow, again every little sub-assembly is a fine model on it's own - fantastic 👍

Bernhard Schrock
Thx for you feedback 🙂🙂
The entire interior is lined with upholstery, which is primarily used for noise-insulation. Until yesterday, I broke my head because I didn't know how to repicate it… After a conversation with a mate (thx Hanno), the brilliant idea came to me: Fimo clay.
The material can be processed excellently and is solid in the oven after 30 minutes at 130°. The most important thing is that it does not become bone-hard but left elastic and can even be sanded.

Hanno Kleinecke
Again you nailed it ! That Fimo stuff looks very realistic ! 👍

Michael Kohl
150 pics and you didn't even close the fuselage. And not a second of dullness. Finest modelling entertainment. 🙂

David Taylor
Will you be adding crew Bernhard.

Joseph Russo
The insulation is amazing but so are the pieces of equipment

Bernhard Schrock
This morning I was curious and unpacked the chassis of Jam-Screw. As already written, the quality is outstanding. But everything is so filigree that you have to be very careful and not to break anything when handling. I had to improvise a bit here and there. In the end, I was finished after 2 hours. Including preparation for laying the cables.

Tom Spiegelberg
Der Baufortschritt ist echt sehenswert und beeindruckend Bernhard. Die Bilder vom Innenraum von Dir und Thomas sind toll! Es gibt leider sehr wenig Bilder vom Original und sind eine tolle Vorlage. Vielleicht macht ihr nen extra Walkaround hier. Ich freue mich schon auf die nächsten Bilder.

Bernhard Schrock
Danke fürs Lob Tom. 🙂. Dank der hervorragenden Innenraum-Fotos macht es wirklich sehr viel Freude herumzupuzzeln. Mein Seaking Projekt hat, könnte man sagen, eine „kritische Masse" erreicht. Dank diversen Kontakten zu Hubschrauber-Spezialisten, und ehemaligem Wart und nunmehr der Connection zur Jam-Screw habe ich die Möglichkeit offene Fragen auch dort zu klären. Für seine CAD files hat JS / Andy und seine Leute hunderte von Fotos geschossen, zu den ein normaler Sterblicher keinen Zugang hat.
Deinen Vorschlag werde ich an Thomas weiterleiten. Deine Idee ist sehr gut.🙂

Alec K
Jam-Screw additions are looking spectacular 👍

gorby
Amazing attention to detail!

Dieter Bihlmaier
Spechless 😉

Dietmar Bogatzki
Wahnsinn was du da reingesteckt hast allein die Instrumente und Sitze sind schon ne Show

Dietmar Bogatzki
👍 👍

Bernhard Schrock
Thank you for the big praise. I am very happy to have such a large number of fans of this WIP.🙂🙂
Dietmar: nur dank der Unterstützung von einer Handvoll von Mk-41 Fans ist es mir möglich so tief in die Materie einzutauchen.
Übrigens: Ganz am Anfang wollte ich die Türen offen lassen und nur ein „bisschen" im Inneren tun. Aber als ich die Fotos von Thomas betrachtet habe, bin ich „getürmt und hab mich auf dem Boden versteckt". Irgendwann habe ich jedoch den „Zustand der inneren Ruhe" (die Phase wenn ich kein Problem mehr damit habe mich z.B. mit einem Rucksack aus Fimo eine halbe Stunde zu beschäftigen)🙂🙂 und betrachte es inzwischen als eine Herausforderung, wieviel ich von dem Zeug nachbauen kann.

Shar Dipree
Awesome work so far! 👍👍👍👍

JAM-SCREW
Very exciting to see what can be achieved with even a very good kit. Commitment and patience wonderful recipe for outstanding success. A pleasure to go along for this journey.

Sy Bar
Truely amazing scratch building and detailing 🍿

bughunter
Impressive labels! Is your "normal printer" a InkJet or a Laser printer?

Bernhard Schrock
Thank you for your unique and supportive comments !🙂🙂
It's a usual business copymashine/printer in tower design, Minolta serie 7.

Bruce Huxtable
The interior is a delight to the eye, for sure. Inspirational modelling🙂

gorby
Just caught up with your build and it is jaw-dropping!

Bernhard Schrock
🙂🙂.
The last big point for interior components is completed: rack for electronic equipment & foldable seat.

Dietmar Bogatzki
einfach nur geil Bernhard 👍 /y)

Lode Schildermans
Simply amazing. There are no words to describe this level

Alec K
I agree with Lode. Just outstanding research and execution.

CaptGPF
God God! I'm just amazed how much scratch built detail you put into this build with each passing day!

Bernhard Schrock
A waterproof green rubber mat is laid on the cabin floor of the SeaKings of the German Navy. However, not under the equipment rack and not in the area of the „shower cabin" (radaroperator workstation). There, the rubber mat was left out, shortened and folded upwards.

At the points of the mountingpoints and other hatches, access covers (probably also made of rubber) are incorporated into the rubber mat.

Spanjaard
i really love the details of the rack for electronic equipment & foldable seat.

gorby
Astounding! 😮

J35J
Speachless, one of the best builds I've even seen.👏🏼👏🏼👏🏼

Hanno Kleinecke
The lecture continues ! Altough it's a pity to partially hide all these wonderful details in the closing halves, I'm curious !

Bernhard Schrock
After completing the engine housing I begun today detailing the bottom.
Just as on the fuselage sides, the equipment on the bottom of the Mk41 is different from the british variants.

Kim Branders
A masterpiece...😮......a big 👍

Alec K
The level of detailing on this thing is simply too notch. Number of bits you have added must be in the thousands! Masterclass 👍 👍👍

Dietmar Bogatzki
Einfach nur Geil.....hast du jede Niete nachgezählt, Bernhard 👍
Liebe solche Modellbauer da komme ich nicht mit

Hanno Kleinecke
Holy smokes, this is escalating everytime I'm checking the progress here !
The Airfix-guys must be crying for their mama by now…….😄

Qwertzel
Sehr schöner Innenraum. Ich liebe deine medizinischen Hilfsmittel. Bin selber im Thema drin und kann keinen Unterschied zu den realen Maschinen feststellen. Echt gute Arbeit!

Bernhard Schrock
Thank you for the last wave of such nice comments. I have the last big hurdle to taken: installing clear parts for the cockpit without mess.
Qwertzel: freut mich, dass dir mein Medizin-Equipment gefällt. Du hast erwähnt, dass du selbst sehr dicht dran bist. Hab gesehen dass du auch einen Rettungs Quirl im Bau hast bzw. Eine ganze Menge von Feuerwehrfahrzeugen. Bist du selbst auch im Einsatz? LG B

Qwertzel
Ja, kann man so sagen. Bin seit mehreren Jahren bei der freiwilligen Feuerwehr, bei den Maltesern und beim DRK im Sanitätsdienst und Katastrophenschutz. Ab einem gewissen Punkt ist das ganze Rettungswesen eher eine Lebenseinstellung, anstelle eines Hobbys

Alec K
The paint is on! Best of luck with the clear parts 👍

Alec K
… and they are in place, flawlessly installed. I admire your precision, truly excellent 👍

Bernhard Schrock
Thank you Alec: Your comment honors me very much.
Today morning I worked on the nose, installed several parts of SeMa Models And finally the „thing" looks like a Mk41. 🙂

bughunter
This model will be THE one and only REAL Seaking 👍

Dieter Bihlmaier
Your eye for detail is terrific Bernhard!

Zbynek Honzik
I look at the photos and marvel at the precision and modeling skill. Fantastic, Bernhard! 👏👏👏

Michael Kohl
You have all the reason to be satisfied. Outstanding achievement.

KyMustang
Very impressive. You should be satisfied!

Bruce Huxtable
Here, here!

Joerg Stange
Richtig klasse Dein Seaking! 👍

Hanno Kleinecke
Incredibly realistic look and extraterrestrial cleanliness in paintjob and especially masking the clearparts, exemplary !

John
Looks amazing! Beautiful results on that glass, I bet that felt good to remove and see the results. 👍

Ray Loch
Stunning, that interior is something else.

Alec K
Simply magnificent 👍

Bernhard Schrock
I have hardly any experience with 3D printed parts, especially concerning the flexibility. The material used by Jam-Screw is quite brittle. Therefore, I decided to disconnect the axles and insert a wire. This also has the advantage that you can align the wheels precisely afterwards, especially because they are flattened.

PK99
Wow!! Unbelievable details.

Bernhard Schrock
Thank you mates. 🙂
Result of a modeling mini task: DIY FOD covers.
I wanted to be very „smart" and install the exhaust pipes from the outside after painting. I overlooked that the opening in the fuselage is much smaller than the „hidden" end. Therefore, I had to improvise: I sawed off the outer end and inserted them obliquely from the outside.

Michael Kohl
I just love to follow this build

Alec K
I just can't get over the sharpness of the color separations. Absolutely straight, no ragged sections. Superb.

Bernhard Schrock
🙂 🙂
As usual I installed the door without glueing via 2 x piece of 0,26 mm wire. I drilled 2 holes (0,24 mm) from outside through the door into the fuselage.
Who can find the two places? 🙂

Alec K
Top right, along right edge and within the flange to the left?

Bernhard Schrock
Alec alias „Eagle-eye": 2 x bingo! 🙂

Bernhard Schrock
Today I finished one of the last complex parts for the fuselage. The whippers. What do you think: how many individual parts does a windscreen wiper consist of? 🙂

Spanjaard
about 10, at least

Spanjaard
probably about 15

Bernhard Schrock
Spanjaard: tadaaaa!!!!! Almost bull eye! 17 per wiper. 🙂

Sergej I
You missed the wiper mechanism spring 😄

Joking, I have no idea how you manage to cut and drill such microparts.

Spanjaard
😄

gorby
Just been looking at your wipers in awe (not a phrase I thought I'm be using this morning). Stunning work!

Siegfried Van den Bosch
Stunning !

JAM-SCREW
On going master work on a masterpiece. Fantastic in all respects mate.

Vincent
Amazing work on the wipers!

Bruce Huxtable
Fully-functioning wipers? Too much for my brain to comprehend...... Amazing, Bernhard, amazing...!

Dietmar Bogatzki
Guess 7 Parts per wiper 👍

Bernhard Schrock
Never before have I completed a tailrotor in this quality in such a short time! Thanks to Jam Screw!!!🙂🙂🙂 Compared to the original, all this is great: even the kink at the back edge of the blades is reproduced correctly.

Roland Sachsenhofer
These four pictures begin a project that should result in one of the largest models I have ever attempted. Not the biggest - the 1:32 Liberator holds my record here - but close!
However, the impressively large box contains surprisingly little and, also surprisingly, large components such as the fuselage, wings and tailplane are already assembled. Incidentally, these are made of fibreglass and require their own treatment.
These parts are also stable and clean. A bit of filling was required, as the traces of glue and filler on the seams are very rough and show air pockets. This will now be sanded, the cockpit sawn out and the windows drilled - well, modelling a little differently than usual! 🙂

Gergő Takács
This looks like a cool project! Following.

Treehugger
The panel lines look ok I guess.

Mr D
Like it , nice project.
I'm working on the Beriev Be-6 Armoured Flying boat,
Revisiting a kit after 33yrs.
All the best with yours...😃👍👍

Christian Bruer
When I got a photo showing a Pz. I towing a Ju-87, possibly on an airfield in North Africa, I definetely want to build that scenery. The Pz. I is a mix of parts from S-Model Pz. I Ausf. A and B, the Ju-87 is Italeri. I bought some Quickboost add on parts which are designed to fit the Airfix kit, but with slightly modifications they although fit quite well the Italeri kit.
Happy Modelling, Christian

Rui S
I'm in 😎

Dave Flitton
Watching

Tom B.
That´s an interesting combination... watching for sure!

Christian Bruer
Thx to all for looking around 🙂

Nicolas
I'm watching too.

Alec K
I saw (likely) the same photo and also thought it would make a great dio. Glad it will materialize in your capable hands Christian 👍

Lukas Muller
follow 😄

Spanjaard
I am certainly following this one

Christian Bruer
Thank you all for looking around and leaving such kind comments 🙂

Łukasz Gliński
Can't miss it

Christian Lehmann
Na, da bin ich mal gespannt auf das fertige Projekt 👍

Christian Bruer
Still enough place in the first row, welcome aboard Łukasz and Christian 🙂

Christian Bruer
Nearly there, just a few bits and pieces to add before I can start the paintwork.

I got the SSMODEL Pz.I tracks. So far as can be see still in their printing frame they are looking quite nice.

Happy Modelling
Christian

Tom B.
Looking neat so far! Where did you order those 3D parts from? Been curious about those for a while now...

Alec K
Excellent progress Christian 👍. And same question as Tom B.

Christian Bruer
Thank you Tom and Alec. SSMODEL only has a shop at AliExpress. I was a bit hesitant to order there, because there is a lot of rumor about piracy products over there. But once I did not found something similar I want to order from them I registered and ordered at AliExpress. Payment was easy via PayPal and delivery absolutely in time. I also ordered one of the SSMODEL vehicles, Marder III Sd.Kfz.139 SSMODEL 1:72 72725. The details are top notch, but the printing quality in between excellent and poor. The chassis, tracks and single parts are excellent, but the gun mount and gun shield are not so nice. The gun mount is warped and the gun shield has a lot of steps on the inner and outer side. It also differs from the instructions where gun mount and shield are shown as separate parts but it was delivered as a single part. That makes it even more complicated to solve the issues. But I think I will give it a try for another scale 1/72 kit in the future.

Here the link to the shop:
de.aliexpress.com/st..ain.2.72a2xoWPxoWPcN

Transall NG
Very good work !
Thanks for informations.

Tom B.
Thanks for the reply, Christian 👍 It seems that their shop is one of the reliable outlets, then...nice!

Bernd Grün
It turns out very well, Christian. 👌 Looking with interest for the final result.

gorby
Looks like a very interesting project. Exceptionally good work so far!

Christian Bruer
Thank you all for your kind feedback 🙂

Meanwhile I have added a few more details like the steering gear and tilger for the flaps. I also painted and reworked the SSMODEL tracks. They need a slightly adjustment to fit well the the S-Model Pz.I. MOre photos sooon when I start the paintwork.

Happy Modelling, Christian

bughunter
_THAT_ one will be a master piece 👍

Christian Bruer
I try my very best bughunter 🙂

coporado
Great subject and promising builds!

Christian Bruer
Thx budd 🙂

Christian Bruer
WIP painting the Ju-87. Underside in RLM65 Hellblau is done as well as RLM70 Schwarzgrün. Depicting the references I have, the paint seems to have a weathered look, which I took in consideration by highlighting the basic paint.
Next will be the camo with RLM71 Dunkelgrün and a white band on the rear of the fuselage.
Happy Modelling
Christian

Christian Abraham
An interesting project

Moreno Baruffini
Super interesting! Well done!

Christian Bruer
Thank you Christian and Moreno🙂

WIP on my Ju-87 scenery. I rrplaced the First to Fight Pz.I by the one from S-Model but replaced the tracks by 3D printed ones from SSMODEL.
That will come together nicely with a nice contrast in between all of the colours, sand brown Pz.I and the Ju-87 with a standard camouflage in green.
Happy Modelling
Christian

Lukas Muller
Looks superb Chris 👍

Christian Bruer
Thank you Lukas 🙂

There is a lot of masking needed to paint the Ju's splinter camouflage.
I did not masked and sprayed it in one loop, but step by step. For me it works much better in that way.
Only the rear fuselage and tail end is missing. So I have a plan for tomorrow 😁

Happy Modelling
Christian

Alec K
Nice progress Christian. I like your modulation and shading, looks great 👍

coporado
Fantastic paintjob!

Christian Bruer
Thx to you both Alec and corporado 🙂

Rui S
Beautiful Paint work on the little Panzer I 👍

Christian Bruer
Thank you Rui S 🙂

Pietro De Angelis
Great work, congrats!

Oliver
take a seat

Christian Bruer
Thx Pietro and Oliver 🙂

Christian Bruer
WIP on my Ju-87, white band and blackgray walkways are masked and painted. Next weathering, varnish and decals.
A wooden base is also on the way, so I hope to finish this one and several other ongoing projects until SMC🙂
Happy Modelling
Christian

capt. R
Great work!