Hírfolyam
Alexander Gustavo
akarja ezt
akarja ezt
Prowler Super Armored Fighting Suit R Space Type
Nitto 1:20
Ma.k Series 20 (21020) 2000 Új alkatrészek 28 August, 12:23
Andrej Bassich
akarja ezt
akarja ezt
German
Panzerhaubitze 2000 Self-Propeled Howitzer w/Add-On Armor Meng Model 1:35
TS-019 2015 Új alkatrészek 28 August, 12:22
Rca8
akarja ezt
akarja ezt
Porsche 911 SC RS '84 Oman Rally Winner w/Photo-Etched Parts Detail Up Parts Included
NuNu Model Kit 1:24
PN24011PH 2023 Új alkatrészek 28 August, 12:21
Max Otten
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
4 28 August, 11:53
Mr James
Nicely done. but If I may, I think the exhausts could do with some weathering. Dark Iron XF84 as a base and highlighted with copper tones would be my suggestion.
Nicely done. but If I may, I think the exhausts could do with some weathering. Dark Iron XF84 as a base and highlighted with copper tones would be my suggestion.
28 August, 12:19
J35J
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
21 képek
Supermarine 224 - The First Spitfire1:72
Phase 1 done! Now paint prep and detaling
Projekt: Supermarine 224 - The First Spitfire
22 21 July, 09:11
J35J
Thanks Gorby! This is my second vacu kit build and this time it feels a little bit more straight forward…
My experience so far with vacu kits is that you have to spend a good amount of time on fitting, sanding and putty work to get a nice base for paint and finishing. Also spending quite some time reviewing old photos to get a good picture of the details. This as there is a fair amount of scratch work to get a decent build.
Thanks Gorby! This is my second vacu kit build and this time it feels a little bit more straight forward…
My experience so far with vacu kits is that you have to spend a good amount of time on fitting, sanding and putty work to get a nice base for paint and finishing. Also spending quite some time reviewing old photos to get a good picture of the details. This as there is a fair amount of scratch work to get a decent build.
25 July, 11:25
Robert Podkoński
You're a brave man, indeed! I will follow this thread with pleasure, for sure.
You're a brave man, indeed! I will follow this thread with pleasure, for sure.
25 July, 12:55
Mr D
Nice, Nice 👍👍, lalways wanted to see a vacform build, Do you have to make up other parts to add on ??
Thanks for upload 😃👍
Nice, Nice 👍👍, lalways wanted to see a vacform build, Do you have to make up other parts to add on ??
Thanks for upload 😃👍
27 July, 19:59
J35J
Thanks Mr D for your comments.
There will certainly be scratch build involved, mainly regarding the details as it looks for now. Otherwise I will raid my spare part stash first in order to save time and frustration.
If you are intrested in vac kits you can also have a look at my first vac kit:
McDonnell XP-67 Moonbat | Album by J35J (1:72)
Thanks Mr D for your comments.
There will certainly be scratch build involved, mainly regarding the details as it looks for now. Otherwise I will raid my spare part stash first in order to save time and frustration.
If you are intrested in vac kits you can also have a look at my first vac kit:
McDonnell XP-67 Moonbat | Album by J35J (1:72)
27 July, 21:39
Mr D
Thanks 👍👍 great, will do , l have an intest...as l enjoy making parts, lve had to do it few times, when parts lost or broken or details missed of kit...even canopy once 🤣.
Will check out the XP-67
Thanks 👍👍 great, will do , l have an intest...as l enjoy making parts, lve had to do it few times, when parts lost or broken or details missed of kit...even canopy once 🤣.
Will check out the XP-67
28 July, 17:00
J35J
@Mr D - yes you will need some good scissors as a start😅, for the fine tuning of the parts I normally use saw razor blades and sanding paper of variuos grits. Regarding glue I use "normal" Tamyia Extra Thin, the vacu kit plastic is often quite soft and melts easily.
@Mr D - yes you will need some good scissors as a start😅, for the fine tuning of the parts I normally use saw razor blades and sanding paper of variuos grits. Regarding glue I use "normal" Tamyia Extra Thin, the vacu kit plastic is often quite soft and melts easily.
30 July, 19:02
J35J
@Skyhiker - Happy to hear that your following with great intrest. Usually the building pace goes down during the sommer period as I have been reminded that we have a garden that also need some TLC…😂
Nevertheless, yes there is planning and ordning of parts going on behind the scenes. Cockpit need to be done, rescribing the full kit, alignment of wheels as the mold was totally off-set. Drill out all machine guns for after market parts etc.
The main work will be to prepare the plane for NMF look also including some aluminum dope areas. Will try AK's metal paints this time. Stay tuned!
@Skyhiker - Happy to hear that your following with great intrest. Usually the building pace goes down during the sommer period as I have been reminded that we have a garden that also need some TLC…😂
Nevertheless, yes there is planning and ordning of parts going on behind the scenes. Cockpit need to be done, rescribing the full kit, alignment of wheels as the mold was totally off-set. Drill out all machine guns for after market parts etc.
The main work will be to prepare the plane for NMF look also including some aluminum dope areas. Will try AK's metal paints this time. Stay tuned!
30 July, 19:11
Łukasz Gliński
Luckily the old Russian saying applies to Sweden too - "we have only 10 months of winter, but all the rest is summer!" 😄
Luckily the old Russian saying applies to Sweden too - "we have only 10 months of winter, but all the rest is summer!" 😄
31 July, 07:41
J35J
Mr D - regarding reference photos and material, did research some photos and blue prints on-line. In addition I have also checked out some ref builds both in 1/72 & 1/48 for further input on details.
Yes, the PE venting turned out good. Next step is to paint the cockpit and glue the airframe together
Mr D - regarding reference photos and material, did research some photos and blue prints on-line. In addition I have also checked out some ref builds both in 1/72 & 1/48 for further input on details.
Yes, the PE venting turned out good. Next step is to paint the cockpit and glue the airframe together
17 August, 05:27
Mr D
Great 👍👍 l like something different n interesting like this.
I recently used the thick tin foil of a hot chocolate lid to make a lost seat belt, it worked really well.
Like the seat.
Thanks for input n uploading 😁👌
Great 👍👍 l like something different n interesting like this.
I recently used the thick tin foil of a hot chocolate lid to make a lost seat belt, it worked really well.
Like the seat.
Thanks for input n uploading 😁👌
17 August, 10:43
J35J
Thanks Thomas, really appreciate your comment!
As usual the project ambition increases over time…😂
Thanks Thomas, really appreciate your comment!
As usual the project ambition increases over time…😂
17 August, 13:07
J35J
Mr D - thanks for your intrest and encouraging comments.
This time I went the easy way with just some tape for seat belts
Mr D - thanks for your intrest and encouraging comments.
This time I went the easy way with just some tape for seat belts
17 August, 13:12
J35J
Thanks! Feels always nice when the main build part is done and everything is aligned. Now time for rescribing.
Thanks! Feels always nice when the main build part is done and everything is aligned. Now time for rescribing.
20 August, 16:55
J35J
Thanks Finn & Cuajete for your comments & intrest! Rescribing up next and then some final sanding to prep for paint.
Will try AK extreme metal paints for the first time in this build. Any experiance, tips or tricks regarding these paints for a solid result?
Thanks Finn & Cuajete for your comments & intrest! Rescribing up next and then some final sanding to prep for paint.
Will try AK extreme metal paints for the first time in this build. Any experiance, tips or tricks regarding these paints for a solid result?
21 August, 19:38
TOtt
akarja ezt
akarja ezt
SdKfz 250 'neu' # 1 SdKfz 250/1 and SdKfz 250/3 on the West Front
Star Decals 1:35
35-C1370 2023 Új eszköz 28 August, 12:10
Bobby Thumbs
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
19 képek
Remix Project: Girl fight - Crouching Tiger Edition.Új: 28 August, 12:07 1:35
Projekt: Girl Fight
3 9 June, 14:08
Raeder
akarja ezt
akarja ezt
Armstrong-Whitworth F.K.8 Mid. Production Version
Copper State Models (CSM) 1:48
CSM 1030 Premium 2017 Új eszköz 28 August, 12:07
Duncan Black
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
93 képek
GWH Su-27UBM buildÚj: 28 August, 12:07 1:48
I do not like painting cockpits so was glad to reach this stage.
Projekt: GWH Su-27UB Flanker C
27 17 April, 09:22
Duncan Black
I have since sorted out the slight smudges on the digital camo where the mask lifted.
I have since sorted out the slight smudges on the digital camo where the mask lifted.
29 April, 10:48
Vincent
Very impressive! I like the metallic effects on the engines. Looking forward to the end result🙂
Very impressive! I like the metallic effects on the engines. Looking forward to the end result🙂
16 July, 03:54
Paul
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
7 képek
Tamiya IJN YamatoÚj: 28 August, 12:05 1:350
Instructions don’t include a rigging diagram. Also a lot of ammunition crates are provided but only a few are mentioned.
Projekt: IJN Yamato
Scratchbuilt
2 28 August, 12:04
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=hu
35
35
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo