Hírfolyam

Ian Doody
Ebay gluebomb restoration project. Stripped the built parts down and cleaned them up.The beginnings of paint up. So much more do. But fun bit next, painting metallics by hand, and weathering it.

Ian Doody
Just started to block in the aluminium tub colours, only added a watered down acrylic brown/black wash. Now I wait for it to dry, then ink wash, aluminium layer, then varnish, then another light brown wash.

Kyle DeHart
Off to a quick start. You'll have it looking great in no time.

Ian Doody
First ink wash, just to put some life into the aluminium. I'll dry brush another metallic layer over this, then varnish, the do some more washes. Not a quick process, mainly due to drying times, but it looks really good.

Ian Doody
That's it for today. Still very early stage, second ink wash. It will become more subdued as I continue with layering the aluminium. This is an acceptable beginning though.

Villiers de Vos
Very nice weathering.

Jv
Taking a seat I am interested in how you strip it down I bought a few glue booms myself and not sure how to get the glue of

Ian Doody
That's it for today, and for now on this project. I've lost inspiration and desire to work on it, so back in the box, until I feel inspired to do it again. Just not feeling it, and I don't want to muck it up. Added a varnish layer, fitted the foot pedals and fixed the hole in the tub wheel bay cover.

Ian Doody
Back to the big Ferrari. The cool thing about 70s Tamiya kits, is they gave you buildable tools. It's a screwdriver and wheel nut wrench. Nice.

Ian Doody
Not a lot happening at the moment, I'm doing a lot of sanding, glueing small parts, changing bolt heads on the rear of the gearbox and brakes, as these will be seen. I'll add and swap out bolts on the black crossmember, suspension brace, as its also quite noticable. Also drilled holes in the e haust brackets, for the retention springs, Just a quick dry fit too. Even unpainted the engine is an impressive piece of hand-built model engineering from Tamiya.

Mark D
Following this one! (Have the same one waiting (with a little less glue)

Ian Doody
Scratch built the rear brake air intake cooling scoop bracket. Mad? Me? Probably 😂 there is no line down the middle, it's the crappy silver plastic. It makes dark marks appear at joins and sprue attachment points. I'll putty over the intake, then paint it to look like the clear fibreglass, suitably weathered, with a piece of tape to lesson the amount of air reaching the brakes, just like on the real thing. Exciting things ahead 😉

Ian Doody
And, yes I'm going to put in brake lines.

Villiers de Vos
Very nice progress.

Ian Doody
That's it for today, just blocked in some colour, weathering and extra details tomorrow.

Kyle DeHart
Looking good Ian!

Ian Doody
Weeeell, that's all for today. I'm knackered. Pretty good progress, I've almost finished the 312T's Transverse gearbox, added the plumbing, detail and weathering paint, painted the brake airscoops, added nuts, and painted the suspension crossbeam. Only the anti-roll bar and a bracket still to fit. Bloody good fun that was.

Ian Doody
I think this might turn out rather good.

Ian Doody
As always, doesn't look like I've done anything at all today. Finished off the anti-roll bar and brackets, made a start on the left hand side suspension lower arm, swapped nuts out for better ones, wheel mount, drive shaft and shock absorber, also made a start on the rear wing mounting bracket and battery holder.

bmod
Definitely pulling up a chair to watch this one come along. 🙂 Looks great!

Ian Doody
Not a huge update, as I've had a few days away from modelling. Finished the coil springs on both sides and the right upright and drive shaft. Haven't got to finishing the anti-roll bar yet, as I'm changing the support rods for thinner wire, so it looks more in scale. More soon.

Dominik Weitzer
looks great!

Ian Doody
Back to working on the Tamiya 1/12 1975 Ferrari 312T. Today was just to get reacquainted with the kit, remember where I was, what I had planned, and where I'm going. Tested the fit of the rear wheels and tyres, everything is just friction fitted so far, a long way to go yet. That's how good Tamiya kits are, even forty eight year old kits fit together so well. Work will continue tomorrow with the rear anti-roll bar system, as im making the connecting rods more in scale. This is going to look awesome finished.

Villiers de Vos
Welcome back at the bench Ian.

Ian Doody
As usual not a lot new to see. With one thing or another I've been busy with other things recently. But back to the rear of the 312T. Finished the gearbox, and rear suspension, anti-roll bar adjusters. Replaced the kit parts with pins, for a finer appearance.

Ian Doody
Sloooow work continues on the 312T. The Ferrari Tipo 015, 2,992 cc (182.6 cu in), flat 12, naturally aspirated, engine is a mini kit in itself. Its going to be a complicated, Spaghetti wiring job, there's twelve wires for the fuel injection and twelve wires for the electrical ignition system. Then all the water and assorted pump plumbing. but it's going to look very cool. I am going to add a few things here and there, and I've sourced some air funnel mesh guards. Also I'll be assembling the Octopuss exhaust system of twelve pipes too. Proper Italian plumbing nightmare, but it is a Ferrari lol 😆 all this is just dry fitted for now.

Kyle DeHart
Going to be a stunning powerplant.

Ian Doody
Mixed bag of modelling today, shook sticks at a few different kits. As winter is approaching, looks like I've got Ships and F1 cars in my future. I've been putting the Ferrari off for months as I worked through my Sci-Fi backlog, soo work will commence on the 1975 world championship winning F1 car, my birth year. Doing the bodywork air-intake mod, and scratch building the fibreglass valve covers, plus adding a lot of missing details, wiring and plumbing, swapping nuts n bolts, scratching the accelerator assembly, and spray painting the final bodywork for the first time... a lot to do, but it'll look very cool.

Kyle DeHart
Excellent. It's definitely going to look very cool.

Ian Doody
It has been a whole year since I touched the 1975 Ferrari 312T, omg 😲 finally put paint down on the main case of the Flat 12 engine. More soon.

Ian Doody
Ferrari 312T Tipo 15 Flat 12 engine. Only made a tiny bit of progress today, first pump and hose. More weathering to come. Then fitting all the pipes, electrics, rear transverse gearbox and suspension, and the exhaust system, that all pretty much needs to be done at the same time.

Kyle DeHart
Lovely work Ian!!

Ian Doody
Making a start on the big 70s F1 GoodYears.

Kyle DeHart
Love it.

Ian Doody
Making a start on painting up the first three exhaust pipes. I'm going for a 1980s Tamiya Catalogue, Francois Verlinden look. Painted to my personal taste, there's more than enough pristine, sparkly builds out there.

Villiers de Vos
Very nice effects on the engine.

Ian Doody
First six pipes of the exhaust manifold system finished and attached permanently.  

Ian Doody
Just dry fitted the gearbox so I can glue the exhaust ends in place. 

Kyle DeHart
Everything is looking really great. Loving the look of the exhaust.

Neuling
Clean and careful work!

Mona
and It looks sexy too

Ben M
I love 70's datsuns. This looks great.

Mr D
Very nice, great engine bay 👍👍👍 well done 👌

Mr D
I prefer this to the Dark blue, l think....l have a Tamiya 1/72 lined up to be built.
Really nice job..👍👍👍

Maciej Bellos
Watching!

Dave Flitton
The work is great!!! It's too bad Eduard never provided a set for the more accurate and longer Academy kit.

Austin K
Thanks. And yeah, it would have been nice. Although the Strykers in Afghanistan have slat on the rear door and that's about it, so you could get away with doing a modern, in-theater Stryker, but it'd take quite a bit of scratch.

Holger Kranich
For being braille scale, you did a great job on this model/dio! Nice paintjob on the soldiers, too! I like it!

Austin K
Thanks! I have a tutorial on how I paint ACU's in 1/72 on the ARC forums in case you are interested.

Finn
Well done and well presented

Michael Muschalik
Wow. Amazing model.

Doubtingmango
Big cat!

Kees Borgers
Watching, good luck with the build.

Christian Bruer
Bergepanther Ausf. D, Dragon kit Panther Ausf. D, Fat Frog Models tracks and some scratchbuild details to present an early Bergepanther.
An easy self made conversion for an interesting recovery vehicle. I will add drawbars, a rack with a timber and the wooden hatch above the turret opening.
Happy Modelling
Christian

Christian Bruer
WIP on my Bergepanther conversion. Today I added the wooden planking and hinges ontop of the turret opening cover.
Happy Modelling
Christian

Alec K
Looking lovely, taking a seat 👍

Jennifer Franklin
I like what I see, following

Christian Bruer
Thx Alex and Jennifer🙂 Still enough place in the first row by the way 😉

Tom B.
Taking up one of those firstt row seats on this one! These Fat Frog tracks are really neat, currently using a set on a King Tiger... Looking forward to more of the scratchbuilt addons 👍

Christian Bruer
You're welcome Tom B. 🙂

Indeed the Fat Frog tracks are really nice, but a lil bit tricky to remove all the printing supports mainly on the inner side of the tracks.

Christian Bruer
WIP on my Bergepanther conversion. Tow bars and wooden beam added.
So far I have no references for early Bergepanther using the wooden beam, but let's assume it is a field modification.
Happy Modelling
Christian

Christian Bruer
WIP on my Bergepanther. Rear plate, details added. I cut the covers and hatches off from the kit part. Muchveasier than to rebuild the details.
Happy Modelling
Christian

Alec K
Christian, I love your scratched wood structures. Very realistic to my eye 👍

Jennifer Franklin
Agreed, the scratched wood structure looks great.

gorby
Remarkable scratch building!

Christian Bruer
Thank you very much for your kind comments Alec, Jennifer and gorby 🙂

Christian Bruer
The exterior is finished. I think I will add some interior because I will the hatches left open.
Happy Modelling
Christian

Jennifer Franklin
Did you paint the metal pieces to look like metal or are they real metal pieces?

Christian Bruer
Jennifer, I gues you asked about the enging grill covers. These are brass photo etch parts from a Flyhawk PE Set.

Jennifer Franklin
The brass parts look great

Christian Bruer
Yep, they're nicely done.

I decide to add some figures, crew and chatting tank drivers.

Happy Modelling
Christian

Christian Bruer
Nearly there, just a few highlights to paint and the brackets for the Schürzen to add.
Happy Modelling
Christian

Pepe
Nice!!!!

Spanjaard
looking fantastic Christian.