Hírfolyam
Klaas van der Wielen
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
22 18 April, 19:17
John
Interesting subject! I had thought the kikka was almost a direct copy of the Me-262, kind of like the shusui/Me-163 but I see that's not the case. How is the kit? Looks good on the sprues at least.
Interesting subject! I had thought the kikka was almost a direct copy of the Me-262, kind of like the shusui/Me-163 but I see that's not the case. How is the kit? Looks good on the sprues at least.
27 April, 15:39
Klaas van der Wielen
It's a beautifully molded kit. Very fine detail. Fit is okay, except for the wings to fuselage, but nothing too concerning. There are a couple of sink marks though, which forces me to look foor other main wheels. The Kikka used Zero wheels so that's an easy fix. All in all I like the kit a lot, it looks delicate and to scale, unlike Airfix for example. I already built their A7M1 Reppu, so with the Kikka as a subject I didn't think too long when I came across this one.
It's a beautifully molded kit. Very fine detail. Fit is okay, except for the wings to fuselage, but nothing too concerning. There are a couple of sink marks though, which forces me to look foor other main wheels. The Kikka used Zero wheels so that's an easy fix. All in all I like the kit a lot, it looks delicate and to scale, unlike Airfix for example. I already built their A7M1 Reppu, so with the Kikka as a subject I didn't think too long when I came across this one.
28 April, 12:00
Marathon
megszerezte ezt
megszerezte ezt
HGUC Gundam 0083
MS-06F-2 Zaku II F2 E.F.S.F. Mass-Produced Mobile Suit Bandai Spirits 1:144
5057745 (107) 2019 Új doboz 28 October, 17:17
Marathon
megszerezte ezt
megszerezte ezt
HGUC Gundam 0083
MS-06F-2 Zaku II F2 E.F.S.F. Mass-Produced Mobile Suit Bandai Spirits 1:144
5057745 (107) 2019 Új doboz 28 October, 17:17
Marathon
megszerezte ezt
megszerezte ezt
HGUC
RGM-79C GM Type C E.F.S.F. Mass-Produced Mobile Suit Bandai Spirits 1:144
5059163 (113) 2019 Új doboz 28 October, 17:16
F-104
megrendeltnek jelölte ezt
megrendeltnek jelölte ezt
TISEO for F-4E exterior 3D Decal with 3D printed parts for MENG kit
Quinta Studio 1:48
QP+48021 2023 Új eszköz 28 October, 17:16
Ian Doody
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
46 képek
Gigant Floh Jagd Kampf Anzug Ausf EÚj: 28 October, 16:38 1:20
After finally getting over a head cold, back to the 1/20 WAVE Strahl Demokratische Republik Gigant Floh. SDR Piloten Chr...
2 25 October, 01:10
Ian Doody
. SDR Piloten Christof Motti, painted him up, and slapped him in, basically just the stock pilot, with the Super Jerry blind cockpit gear, added cables, may have to sand his butt down, as you can't see much of the poor swine, when he's sealed in his walking coffin. That'll do for today.
. SDR Piloten Christof Motti, painted him up, and slapped him in, basically just the stock pilot, with the Super Jerry blind cockpit gear, added cables, may have to sand his butt down, as you can't see much of the poor swine, when he's sealed in his walking coffin. That'll do for today.
28 October, 16:44
Marathon
megszerezte ezt
megszerezte ezt
HGUC Gundam Unicorn
MS-08TX/S Efreet Schneid Principality of Zeon Prototype Close-Combat Mobile Suit Bandai 1:144
0216738 (206) 2017 Új eszköz 28 October, 17:14
Miroslav
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
11 képek
Humber 2. CSOB, 3rd Armoured Battalion, 1945Új: 28 October, 17:10 1:35
decals applied on clear coat and one more clear coat.
5 17 October, 20:39
gorby
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
34 képek
Flash, mould lines, sink marks, ejection pin marks and a little bit of kit thrown in. 1:72
Projekt: Foden C-Type Steam Lorry
57 11 October, 15:30
David Taylor
You like most of us waste our lives fiddling away on our own little projects only you do it better than most.I try and resist building OOB to make it more challenging and interesting,sometimes OOB.LOL
You like most of us waste our lives fiddling away on our own little projects only you do it better than most.I try and resist building OOB to make it more challenging and interesting,sometimes OOB.LOL
11 October, 18:28
Rui S
What a beautiful scratch you're doing in such a small kit. This is Unbelievable 😮 at least for a person with tired eyes like me. Do you use a microscope? 😄
What a beautiful scratch you're doing in such a small kit. This is Unbelievable 😮 at least for a person with tired eyes like me. Do you use a microscope? 😄
12 October, 01:50
gorby
Rui, these days I can barely find my work bench without my optivisor. 😄 😄
David, I do it because I like the challenge as well...and I can't write symphonies. Scratch-building in 1/72 also gives me a chance to practice swearing. I'm getting quite good at it now. 😳
Thanks all for tagging along. 🙂
Rui, these days I can barely find my work bench without my optivisor. 😄 😄
David, I do it because I like the challenge as well...and I can't write symphonies. Scratch-building in 1/72 also gives me a chance to practice swearing. I'm getting quite good at it now. 😳
Thanks all for tagging along. 🙂
12 October, 06:54
Kesa Tiho
Glad to see your working on another project. Intrested to see how this will come along, or what it even is.. anyways following with interest 👍
Glad to see your working on another project. Intrested to see how this will come along, or what it even is.. anyways following with interest 👍
13 October, 18:46
gorby
Thanks Lukasz. 🙂
The original intention was to do a quick out of the box build...then I saw what was missing and I've sort of got carried away. 🙂
Thanks Lukasz. 🙂
The original intention was to do a quick out of the box build...then I saw what was missing and I've sort of got carried away. 🙂
14 October, 14:56
Mr D
Nice model, l remember seeing a video on simulator truck...used to deliver coal.
Nice 👍👍
Nice model, l remember seeing a video on simulator truck...used to deliver coal.
Nice 👍👍
14 October, 17:02
Alec K
Another scratch project? I am of course in 👍. A wee bit of a depressing preamble (lots of which I identify with), hope you are ok mate 👍.
Excellent progress btw.
Another scratch project? I am of course in 👍. A wee bit of a depressing preamble (lots of which I identify with), hope you are ok mate 👍.
Excellent progress btw.
19 October, 12:14
Mr D
Nice to see scratch build 😃👍
Always inspires and helps to learn new skills.
Looking great so far... Good work 😁👍
Nice to see scratch build 😃👍
Always inspires and helps to learn new skills.
Looking great so far... Good work 😁👍
19 October, 14:01
gorby
Sorry Alex, I thought I'd attached the (very basic) kit to the project, and I'm fine - thanks mate.
Thanks all, I'm enjoying adding a few bits to this thing and glad you like it. 🙂
Sorry Alex, I thought I'd attached the (very basic) kit to the project, and I'm fine - thanks mate.
Thanks all, I'm enjoying adding a few bits to this thing and glad you like it. 🙂
19 October, 14:23
David Goodchild
I feel like I'm a bit late to this party, but this is really fantastic; not just the effort you're putting into it gorby, but the history, the humour and the imagination and research too. It's your model, you make it your way and it's a pleasure to see so much experience and skill put to such satisfying effect. 👍👍😎
I feel like I'm a bit late to this party, but this is really fantastic; not just the effort you're putting into it gorby, but the history, the humour and the imagination and research too. It's your model, you make it your way and it's a pleasure to see so much experience and skill put to such satisfying effect. 👍👍😎
22 October, 10:29
Łukasz Gliński
X-4, my fav colour! 😄 I have to admit this colour setup looks very die-cast-Matchboxish 😄
X-4, my fav colour! 😄 I have to admit this colour setup looks very die-cast-Matchboxish 😄
22 October, 11:14
gorby
Better late than never David. Thanks for the lovely comment. I think some people take this hobby a bit too seriously so I like to do the exact opposite. 🙂
You're right Lukasz, the colour does look a bit die-cast doesn't it? 😄
I need to drag myself away from using X-4 – even if I think it suits oldie-worldie vehicles. I don't want to be thought of as a one trick pony. I'm at least a two trick pony. 😄 😄
Better late than never David. Thanks for the lovely comment. I think some people take this hobby a bit too seriously so I like to do the exact opposite. 🙂
You're right Lukasz, the colour does look a bit die-cast doesn't it? 😄
I need to drag myself away from using X-4 – even if I think it suits oldie-worldie vehicles. I don't want to be thought of as a one trick pony. I'm at least a two trick pony. 😄 😄
22 October, 12:39
Łukasz Gliński
Nah, X-4 fits much more than that: Blue Jetstream (SP-KWN) | Project by Woody (1:72)
Nah, X-4 fits much more than that: Blue Jetstream (SP-KWN) | Project by Woody (1:72)
22 October, 13:23
David Goodchild
People always like to take things seriously, even when they possibly shouldn't! Really look forward to the next update! 👍
People always like to take things seriously, even when they possibly shouldn't! Really look forward to the next update! 👍
22 October, 14:27
Mr D
It happens sometimes! I've had this alot with brush painting, l think the brush would push paint under.
I use a masking fluid on top of any awkward masks now.
You will get it tidied ok.
👍👍
It happens sometimes! I've had this alot with brush painting, l think the brush would push paint under.
I use a masking fluid on top of any awkward masks now.
You will get it tidied ok.
👍👍
22 October, 15:43
gorby
I completed the build yesterday and other than the headlights being a bit too big I'm happy with how it turned out. I ended up really enjoying the build and thanks to every one for following. 👍
I completed the build yesterday and other than the headlights being a bit too big I'm happy with how it turned out. I ended up really enjoying the build and thanks to every one for following. 👍
27 October, 11:41
bughunter
What a nice little lorry! I hear some sound of the steam engine ...
A nice street too. That might be a good idea to seal it with thinned PVA, I'll have to remember that for the future.
What a nice little lorry! I hear some sound of the steam engine ...
A nice street too. That might be a good idea to seal it with thinned PVA, I'll have to remember that for the future.
27 October, 12:01
Alec K
Very nicely done Gorby! The colors are apropo I think, and I like that photo booth (nice dual purpose set up) 👍
Very nicely done Gorby! The colors are apropo I think, and I like that photo booth (nice dual purpose set up) 👍
27 October, 12:56
Łukasz Gliński
Exqusite job! Looks like a bigger scale, 43rd at least 👍
And dat colours and weathering, like Matchbox Yesteryear series taken out of storage after all these years 😄
@John: will do, but only when we start seeing these bigly huge matchsticks 😄
Exqusite job! Looks like a bigger scale, 43rd at least 👍
And dat colours and weathering, like Matchbox Yesteryear series taken out of storage after all these years 😄
@John: will do, but only when we start seeing these bigly huge matchsticks 😄
27 October, 17:38
Kesa Tiho
I love that Gorby's builds comment section became like a little scalemates get together 😂
I love that Gorby's builds comment section became like a little scalemates get together 😂
27 October, 22:15
gorby
WOW! That's a very nice surprise to find in the morning. 🙂
I'm amazed that such a tiny model has had such a big response. Thanks you everyone for taking the time to comment. 👍
John: My 1/72 vehicle fixation was a Zsolt's fault….thanks Zsolt. 🙂
Bugs: What's this? Has the world turned upside down? Me teaching Bughunter something. 😄
Alec: It's also because I'm too tight to buy a photo tent, did I forget to mention that bit. 😄
Kesa: Photo 28 explains how I made the base – it's as quick, simple and cheap as it's possible to make a reasonably decent base.
Lukasz: I'm stttiiilll looking for those huge matches. 😄
Thanks again to everyone who commented or liked. 👍
WOW! That's a very nice surprise to find in the morning. 🙂
I'm amazed that such a tiny model has had such a big response. Thanks you everyone for taking the time to comment. 👍
John: My 1/72 vehicle fixation was a Zsolt's fault….thanks Zsolt. 🙂
Bugs: What's this? Has the world turned upside down? Me teaching Bughunter something. 😄
Alec: It's also because I'm too tight to buy a photo tent, did I forget to mention that bit. 😄
Kesa: Photo 28 explains how I made the base – it's as quick, simple and cheap as it's possible to make a reasonably decent base.
Lukasz: I'm stttiiilll looking for those huge matches. 😄
Thanks again to everyone who commented or liked. 👍
28 October, 05:54
Bohrmann
Beautiful model sir !!! 👍🏻👍🏻👍🏻 In the pictures the model doesn't look that small, certainly not 1/72 scale. Only in slide #34 where you can make the comparison with the match does it dawn on me that this really is a small model. Unless the matches in the Uk are a lot bigger than on the continent. 😉
Beautiful model sir !!! 👍🏻👍🏻👍🏻 In the pictures the model doesn't look that small, certainly not 1/72 scale. Only in slide #34 where you can make the comparison with the match does it dawn on me that this really is a small model. Unless the matches in the Uk are a lot bigger than on the continent. 😉
28 October, 15:15
gorby
Thanks you very much Bohrmann and Finn! 🙂
It really is a tiny little thing - only 9cm long. I did wonder what I was doing with my life when I spent several days detailing the minuscule cab area. 😄
Thanks you very much Bohrmann and Finn! 🙂
It really is a tiny little thing - only 9cm long. I did wonder what I was doing with my life when I spent several days detailing the minuscule cab area. 😄
28 October, 17:08
RobbanSwe
megszerezte ezt
megszerezte ezt
Finland's Top Scorer Ilmari Juutilainen Fokker D.XXI, Brewster Buffalo and Bf 109 G
SBS Model 1:48
D48033 2019 Új eszköz Több téma (3)28 October, 17:02
Michael Kohl
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
30 képek
Two polish aerobatic TS-11 IskrasÚj: 28 October, 17:01 1:72
Cockpits done. Pilots squeezed in, their hands wrapped around the control sticks. One or two details to be fixed that go...
Projekt: PZL TS-11 Iskra aerobatic team
42 7 December 2022, 10:54
Maciej Bellos
I have to watch also! Could you show us a photo of the decals? When were the decals produced?
I have to watch also! Could you show us a photo of the decals? When were the decals produced?
7 December 2022, 14:35
Michael Kohl
My friends. I am really happy to have you around as I was sincerely hoping that this build will arouse the interest of the three of you.
Maciej, are you referring to the kits decals or the ones from RSmodelle. Concering the latter, I cannot tell you, as I have not received them yet.
My friends. I am really happy to have you around as I was sincerely hoping that this build will arouse the interest of the three of you.
Maciej, are you referring to the kits decals or the ones from RSmodelle. Concering the latter, I cannot tell you, as I have not received them yet.
7 December 2022, 16:13
Maciej Bellos
I have the kit, courtesy of Robert.
I was referring to the BSModele decals, as masking the scheme was really challenging and, ehm, painful!
I have the kit, courtesy of Robert.
I was referring to the BSModele decals, as masking the scheme was really challenging and, ehm, painful!
7 December 2022, 16:30
Michael Kohl
Here us the link to the decals at their homepage:
[img1]
Looking at them, I am afraid some decent masking is still ahead of me.
Here us the link to the decals at their homepage:
[img1]
Looking at them, I am afraid some decent masking is still ahead of me.
7 December 2022, 16:44
Robert Podkoński
Good job so far, Michael! (you can find some walkaround photos in my albums, if you wish to 😉 )
Good job so far, Michael! (you can find some walkaround photos in my albums, if you wish to 😉 )
11 December 2022, 16:34
Michael Kohl
Wellcome Bernd and Guy.
Robert, thank you for the invitation. I already helped myself. 🙂
And thanks folks for your likes. Motivates even further.
Wellcome Bernd and Guy.
Robert, thank you for the invitation. I already helped myself. 🙂
And thanks folks for your likes. Motivates even further.
11 December 2022, 19:33
Łukasz Gliński
Progressing very well. I hope the pilots don't mind being polished 😛
Progressing very well. I hope the pilots don't mind being polished 😛
16 December 2022, 12:27
Michael Kohl
Thanks mates for your interest and the likes. Hopefully I will be able to progress this build soon.
Thanks mates for your interest and the likes. Hopefully I will be able to progress this build soon.
14 February 2023, 17:17
Isaac Kite
Taking a seat. The Iskra is a sexy plane, no idea why the Delfin won that contract. Let me guess. Political elimination? Regardless, looking forward to watching this develop.
Taking a seat. The Iskra is a sexy plane, no idea why the Delfin won that contract. Let me guess. Political elimination? Regardless, looking forward to watching this develop.
6 October 2023, 14:57
Michael Kohl
Funny. Just the evening before your comment, Isaac, I dusted them planes and finished the cockpits. Let's move on.
Funny. Just the evening before your comment, Isaac, I dusted them planes and finished the cockpits. Let's move on.
6 October 2023, 17:44
Michael Kohl
Took them out of the shelf another time. Quite a bit of sanding had to be done. Particular the inner rear area of the wing where the box of the intakes tapers towards the trailing edge of the wing is much to thick in the kit. A bit of elbow grease was required there.
A fresh comparison with a machine in flight revealed some more issues I adressed. So, some more filling and sanding. Now I gotta wait till my trusted Mr. Hobby primer sets properly.
Took them out of the shelf another time. Quite a bit of sanding had to be done. Particular the inner rear area of the wing where the box of the intakes tapers towards the trailing edge of the wing is much to thick in the kit. A bit of elbow grease was required there.
A fresh comparison with a machine in flight revealed some more issues I adressed. So, some more filling and sanding. Now I gotta wait till my trusted Mr. Hobby primer sets properly.
24 October, 11:27
Alec K
Taking a very, very belated seat. Great project, had a few chuckles reading your captions 😄
Taking a very, very belated seat. Great project, had a few chuckles reading your captions 😄
24 October, 17:38
Mr D
At least all the preflight checks will be done with German pilots 🤣 just keep them away from Starfighter be ok 😁.
Looking good nice fun project... Cockpit is great,
I use "Nail liner brushes" for cockpit n detail work... there used in beauty parlours for Painting pictures on nails.... There quite cheap and much more accurate than most fine paint brushes out there. 6 or 7mm best.
Good luck with next steps 😃👍
At least all the preflight checks will be done with German pilots 🤣 just keep them away from Starfighter be ok 😁.
Looking good nice fun project... Cockpit is great,
I use "Nail liner brushes" for cockpit n detail work... there used in beauty parlours for Painting pictures on nails.... There quite cheap and much more accurate than most fine paint brushes out there. 6 or 7mm best.
Good luck with next steps 😃👍
24 October, 20:26
Jörg Schäfer
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
138 képek
BauberichtÚj: 28 October, 10:31 1:200
And that’s how I installed them on the deck during the first superstructures.
Projekt: IJN Mikasa
56 31 October 2022, 06:18
Jörg Schäfer
Let's hope so. The conditions are particularly good this time. Not only do I have a Pontos set for this model, I also have an MK 1 set on top. So let's see what I can conjure up from it
Let's hope so. The conditions are particularly good this time. Not only do I have a Pontos set for this model, I also have an MK 1 set on top. So let's see what I can conjure up from it
1 November 2022, 10:35
Sven Schönyan
Zur Entspannung jetzt was bodenständigeres?
Ich bin auf jeden Fall dabei!
Zur Entspannung jetzt was bodenständigeres?
Ich bin auf jeden Fall dabei!
14 February, 16:16
Jörg Schäfer
Schön Sven.
Ja, der Ausflug ins Star Wars Universum war nett, aber ich baue doch am liebsten Schiffchen. 😉
Sehen wir uns auf der EME?
Schön Sven.
Ja, der Ausflug ins Star Wars Universum war nett, aber ich baue doch am liebsten Schiffchen. 😉
Sehen wir uns auf der EME?
14 February, 16:19
Sven Schönyan
Leider nicht. An dem Wochenende kann ich nicht und ich muss dieses Jahr etwas Urlaub sparen. Ich habe für Hamburg im September gebucht.
Leider nicht. An dem Wochenende kann ich nicht und ich muss dieses Jahr etwas Urlaub sparen. Ich habe für Hamburg im September gebucht.
14 February, 16:24
Hans-Jürgen Haag
Schön zu sehen, das japanisch Bügeleisen ist im Bau. Bin schon gespannt auf das Ergebnis!😳
Schön zu sehen, das japanisch Bügeleisen ist im Bau. Bin schon gespannt auf das Ergebnis!😳
17 February, 13:55
Tini Hendriks
Ganz neu für mich, schiffe. Gespannt wo's hingeht. Hals & Beinbruch 💪🏼
Ganz neu für mich, schiffe. Gespannt wo's hingeht. Hals & Beinbruch 💪🏼
17 February, 15:08
Jörg Schäfer
Fein, das freut mich euch dabei zu haben.
Glaubt mir, bin auch gespannt wo ich lande. 😄😉
Fein, das freut mich euch dabei zu haben.
Glaubt mir, bin auch gespannt wo ich lande. 😄😉
18 February, 05:17
Michael Kohl
Nice workbench. And how on earth do you keep your cutting mat that clean?
Das Modell? Ja das Modell wird halt wieder super. Eh klar! 😉
Nice workbench. And how on earth do you keep your cutting mat that clean?
Das Modell? Ja das Modell wird halt wieder super. Eh klar! 😉
5 March, 17:23
Jörg Schäfer
Thanks Michael.
That's easy. Before I started building the Mikasa, I rotated it 180 degrees. If you look at the picture with the bow view, you will notice the paint and glue residue in the back corner. 😁
Thanks Michael.
That's easy. Before I started building the Mikasa, I rotated it 180 degrees. If you look at the picture with the bow view, you will notice the paint and glue residue in the back corner. 😁
6 March, 12:22
Dietmar Bogatzki
Fantastisch was du mit dem Rumpf gezaubert hast, Jörg und das in der kurzen Zeit 👍
Fantastisch was du mit dem Rumpf gezaubert hast, Jörg und das in der kurzen Zeit 👍
15 March, 07:04
Tini Hendriks
Looking great! Steady hand! I would think hullred but I had to look up the word "antifouling" 🤔🦐🦞🐙🦑
Looking great! Steady hand! I would think hullred but I had to look up the word "antifouling" 🤔🦐🦞🐙🦑
15 March, 07:38
Jörg Schäfer
Thank you both.
It's unbelievable what was mixed into the antifouling paint back then, Tini. 😲
Thank you both.
It's unbelievable what was mixed into the antifouling paint back then, Tini. 😲
15 March, 10:04
Sy Bar
Great work so far 🍿
Slight off topic I'm interested in the storage you have behind it. Particularly the one between the brush storage and the three tall draws. My question is de you convert another storage to give the racks for your tray things and if so how/what did you convert? I have the same storage system but have not found anything like that rack and it's a great idea I'd like to use.
Cheers and keep the good work going as it's going to be a great model. 👍
Great work so far 🍿
Slight off topic I'm interested in the storage you have behind it. Particularly the one between the brush storage and the three tall draws. My question is de you convert another storage to give the racks for your tray things and if so how/what did you convert? I have the same storage system but have not found anything like that rack and it's a great idea I'd like to use.
Cheers and keep the good work going as it's going to be a great model. 👍
16 March, 10:36
Jörg Schäfer
Hello Sy Bar.
Thank you.
Do you mean this rack?!
hobbyzone.pl/en/modu..niversal-drawer.html
It is very modular and can be adapted to the respective use. I use them to store the organizer drawers for my etched parts.
Hello Sy Bar.
Thank you.
Do you mean this rack?!
hobbyzone.pl/en/modu..niversal-drawer.html
It is very modular and can be adapted to the respective use. I use them to store the organizer drawers for my etched parts.
16 March, 13:54
Joerg R.
Alter! Hier sieht man erst, welch gigantische Arbeit du jetzt schon wieder investiert hast. Namensvetter, das wird wieder was richtig feines von dir, da bin ich mir zu 100% sicher.
Bin auf jeden Fall wieder dabei und staune und staune.
gruss
Jörg
Alter! Hier sieht man erst, welch gigantische Arbeit du jetzt schon wieder investiert hast. Namensvetter, das wird wieder was richtig feines von dir, da bin ich mir zu 100% sicher.
Bin auf jeden Fall wieder dabei und staune und staune.
gruss
Jörg
16 March, 22:57
NLAWScametovisit
Showed up because I heard there was a grinding orgy of chiseling, but now i'm staying for this incredible build!
Showed up because I heard there was a grinding orgy of chiseling, but now i'm staying for this incredible build!
21 April, 14:51
Hans-Jürgen Haag
Es wächst und gedeiht! Schön mit anzusehen. Der dunkle Anstrich sieht wirklich super aus, gefällt mir ! Weiter so Jörg 👍👍👍
Es wächst und gedeiht! Schön mit anzusehen. Der dunkle Anstrich sieht wirklich super aus, gefällt mir ! Weiter so Jörg 👍👍👍
27 April, 15:51
CaptGPF
Jörg - you always have the most interesting, detailed and fascinating builds! I love how you convey your thought process as you build your masterpieces! Definitely watching to see this new masterpiece!
Jörg - you always have the most interesting, detailed and fascinating builds! I love how you convey your thought process as you build your masterpieces! Definitely watching to see this new masterpiece!
27 April, 16:46
Jörg Schäfer
Danke Hans-Jürgen. 😉
I'm very pleased, CaptGPF, that you like my little construction reports so much. 😁
Danke Hans-Jürgen. 😉
I'm very pleased, CaptGPF, that you like my little construction reports so much. 😁
28 April, 05:02
NLAWScametovisit
This weathering is outstanding! Also, you're giving me severe desk envy for your workshop setup!
This weathering is outstanding! Also, you're giving me severe desk envy for your workshop setup!
27 May, 10:55
Jörg Schäfer
Many thanks to you both.
Yes my workbench turned out really cool, NLAWScametovisit.
Many thanks to you both.
Yes my workbench turned out really cool, NLAWScametovisit.
3 June, 08:34
Matti Thomaes
Sorry for your los, Jörg, but it's good to see you're getting back to our wonderfull hobby.
Sorry for your los, Jörg, but it's good to see you're getting back to our wonderfull hobby.
28 October, 11:00
Michael Kohl
Rough seas you had to steer through lately. My condolences. Hope future waters will be much calmer and this build helps navigate them Looking for more progress here. 🙂
Rough seas you had to steer through lately. My condolences. Hope future waters will be much calmer and this build helps navigate them Looking for more progress here. 🙂
28 October, 16:57
Duster_d
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
16 képek
Ilyushin Il-2 Stormovik (TOKO\Zvezda)1:72
Stormovik is finished. Everything was great, although it was not quite simple.
17 21 September, 16:39
Transall NG
Hello! Take a seat !
A mix of two TOKO references. A Zavod 18 aircraft with metallic wing.
Well, i guess your father knows that any aircraft can be critisized, as they are always used far over what they were built for...
Good luck !
Hello! Take a seat !
A mix of two TOKO references. A Zavod 18 aircraft with metallic wing.
Well, i guess your father knows that any aircraft can be critisized, as they are always used far over what they were built for...
Good luck !
21 September, 19:02
Duster_d
@Transall NG, my father just got caught up in a wave of "Messerization" in the 1990s. After the collapse of the Soviet Union, a flood of articles about the Luftwaffe flooded into Russia, which was like an ideological distraction. Many people dreamed of Messerschmitt and Focke-Wulf aircraft, considering them the best while simultaneously criticizing Soviet aircraft. Perhaps this was successful because in Soviet times, the qualities of German and Allied aircraft were underplayed, and there was little information about them available.
@Transall NG, my father just got caught up in a wave of "Messerization" in the 1990s. After the collapse of the Soviet Union, a flood of articles about the Luftwaffe flooded into Russia, which was like an ideological distraction. Many people dreamed of Messerschmitt and Focke-Wulf aircraft, considering them the best while simultaneously criticizing Soviet aircraft. Perhaps this was successful because in Soviet times, the qualities of German and Allied aircraft were underplayed, and there was little information about them available.
22 September, 08:24
Duster_d
A representative of Zvezda contacted me and, after clarifying some details, informed me that they would send me the missing part of the kit after October 1st. It pleases me.
A representative of Zvezda contacted me and, after clarifying some details, informed me that they would send me the missing part of the kit after October 1st. It pleases me.
25 September, 12:03
Duster_d
The missing part №15 has arrived by post. Thanks to Zvezda for their good customer service.
The missing part №15 has arrived by post. Thanks to Zvezda for their good customer service.
13 October, 11:47
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=hu
35
35
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo