Hírfolyam
Piers Lawson-Brown
akarja ezt
akarja ezt
Collectors' Hi-Grade Series
Subaru Impreza 1995 Monte-Carlo rally winner "Super detail" Hasegawa 1:24
51151 (CH51) 2021 Megváltozott ??? 3 September, 10:34
David Orr
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
20 képek
Tamiya Jaguar XJ220Új: 3 September, 02:06 1:24
The XJ220's curves do a great job of showing off the colour shift.
Projekt: Jaguar XJ220
20 3 June, 06:34
Christian W
Great color! It is always faszinating, how those colors work after clear cote.
Great color! It is always faszinating, how those colors work after clear cote.
3 September, 09:20
Nigel Brand
akarja ezt
akarja ezt
QANTAS, Lockheed L1049 Super Constellation, 1960's for Revell, Minicraft kits, VH-EAD, VH-EAG, VH-EAO
Hawkeye Models 1:144
CDS-033 3 September, 10:32
Maxprime
akarja ezt
akarja ezt
F-16AM Falcon E-006 "Dannebrog 50 years F-16" Royal Danish AF - 2024
Syhart (Syh@rt) 1:48
48-151 2024* Új eszköz 3 September, 10:31
David Orr
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
3 képek
Hasegawa Jaguar XJ-SC V12 CabrioletÚj: 3 September, 02:26 1:24
You've just got to love the interior of a Jag. I particularly like how the burr walnut came out. I painted the wood with...
Projekt: Jaguar XJ-SC V12 Cabriolet
7 3 September, 02:19
Sören Bartusch
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
2 3 September, 09:58
Mr James
What a great dio. The 109 camo is beautifully done, the engine detail is wonderful and the figures are superbly done.
What a great dio. The 109 camo is beautifully done, the engine detail is wonderful and the figures are superbly done.
3 September, 10:09
Jakub Fiala
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
21 1 August, 12:38
Ludvík Kružík
Jakub, the construction progress so far looks very good.
Maybe you'll find a liking in WWI models. 😉
Jakub, the construction progress so far looks very good.
Maybe you'll find a liking in WWI models. 😉
18 August, 22:35
Jakub Fiala
Thank you, mates!
Ludvíku, i must say, that i am enjoing it so far. But there will be more challenges later( riggings, lozenge....) So, i will see. But i believe, that WWII will remains my priority 🙂
Thank you, mates!
Ludvíku, i must say, that i am enjoing it so far. But there will be more challenges later( riggings, lozenge....) So, i will see. But i believe, that WWII will remains my priority 🙂
19 August, 12:11
bughunter
I'm a bit late in commenting do to my holiday - nice work so far!
Since there are some pitfalls: do you want a fun build or should it be correct?
Which specific serial do you plan to build?
I'm a bit late in commenting do to my holiday - nice work so far!
Since there are some pitfalls: do you want a fun build or should it be correct?
Which specific serial do you plan to build?
21 August, 10:03
Jakub Fiala
Thank you, Frank!
I want to build 8244/17 of Jasta 54. This marking is, according Eduard instructions, just a reconstruction based on the description in the flight log, revealed in the Jasta Color book. So, in my opinion it will be difficult to buid it 100% correct 🙂 However, I will of course be grateful for any advice and recommendations
Thank you, Frank!
I want to build 8244/17 of Jasta 54. This marking is, according Eduard instructions, just a reconstruction based on the description in the flight log, revealed in the Jasta Color book. So, in my opinion it will be difficult to buid it 100% correct 🙂 However, I will of course be grateful for any advice and recommendations
21 August, 18:10
bughunter
Ok, on a Pfalz D.IIIa the engine is different. The very simplified Eduard (the pipe work on the lower end of the cylinders is the water, what you have painted dark red - but this is not much visible later) engine shows a older 160hp Mercedes D.III. This is especially shown by the valve train, which can be seen on top of the engine.
Two bolts on top, and the valve in the middle: [img1]
The later 185hp Mercedes D.IIIa was also available for some Pfalz D.III, and nearly all of Pfalz D.IIIa pictures shows this stronger version. The drawings I know too. The engine is a little bit bigger, but the valve train looks very different - four bolts and the valves rockers comes out of the side:
[img1]
Roden has a better representation of this engine (same sprue on all kits), and it is also more correct in size. That means I cannot get it into this model 🙁
No worries mate, only an expert will notice on the finished model 🙂
And regarding the wings: I strongly recommend Aviattic decals. The ones printed on clear paper (normal) and the ones printed on white for rib tapes. Or you use the Eduard rib tapes. I have some build logs explaining the usage.
Ok, on a Pfalz D.IIIa the engine is different. The very simplified Eduard (the pipe work on the lower end of the cylinders is the water, what you have painted dark red - but this is not much visible later) engine shows a older 160hp Mercedes D.III. This is especially shown by the valve train, which can be seen on top of the engine.
Two bolts on top, and the valve in the middle: [img1]
The later 185hp Mercedes D.IIIa was also available for some Pfalz D.III, and nearly all of Pfalz D.IIIa pictures shows this stronger version. The drawings I know too. The engine is a little bit bigger, but the valve train looks very different - four bolts and the valves rockers comes out of the side:
[img1]
Roden has a better representation of this engine (same sprue on all kits), and it is also more correct in size. That means I cannot get it into this model 🙁
No worries mate, only an expert will notice on the finished model 🙂
And regarding the wings: I strongly recommend Aviattic decals. The ones printed on clear paper (normal) and the ones printed on white for rib tapes. Or you use the Eduard rib tapes. I have some build logs explaining the usage.
30 August, 15:56
Jakub Fiala
Thank you very much, Frank, for your help!
While going through the photos and drawings of the engines, I noticed that each type is different, but I was quite confused as to which engine was the right one. In the end I didn't deal with it and just tried to scratchbuild some visible details that are missing from the kit. For example the air pump, pipes and hoses leading from the radiator on the upper wing etc. I use the WnW manual and kit ( borrowed from a friend of mine) as the main source of information 🙂
Thanks for the advice on decals. I'll try to get the Aviattic ones. But I don't know if it will be easier for me to use the lozenge decals from the kit, which are already prepared in the shape of a wing. I will see...
Thank you very much, Frank, for your help!
While going through the photos and drawings of the engines, I noticed that each type is different, but I was quite confused as to which engine was the right one. In the end I didn't deal with it and just tried to scratchbuild some visible details that are missing from the kit. For example the air pump, pipes and hoses leading from the radiator on the upper wing etc. I use the WnW manual and kit ( borrowed from a friend of mine) as the main source of information 🙂
Thanks for the advice on decals. I'll try to get the Aviattic ones. But I don't know if it will be easier for me to use the lozenge decals from the kit, which are already prepared in the shape of a wing. I will see...
3 September, 10:21
F-104
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
3 2 September, 18:37
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=hu
35
35
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo