Hírfolyam
Rod -
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
15 28 August, 15:05
Rod -
This kit is more than 50 years old and amazingly good. The original tires in my kit had decomposed to mush so I got some Tamiya RC tires, machined some rims and 3d printed some centres.
The kit comes with a motor, lights and wiring. Motor hidden in engine block, 4x AA in the fuel tank. It even has little uni joints on the tail shaft.
This kit is more than 50 years old and amazingly good. The original tires in my kit had decomposed to mush so I got some Tamiya RC tires, machined some rims and 3d printed some centres.
The kit comes with a motor, lights and wiring. Motor hidden in engine block, 4x AA in the fuel tank. It even has little uni joints on the tail shaft.
28 August, 15:12
Rod -
I've spent a bit of time trying to get the stance right. Out of box it sits quite high.
I've spent a bit of time trying to get the stance right. Out of box it sits quite high.
28 August, 15:13
Rod -
I have a cnc lathe at home. It has a 75mm spindle bore, a bit bigger than a hobby lathe 🙂
I have a cnc lathe at home. It has a 75mm spindle bore, a bit bigger than a hobby lathe 🙂
28 August, 23:01
Rod -
Dash gauge decals pinched from a 1/12 foose camaro kit. The original decal sheet only gives you 3 choices of screaming chicken and a big blue stripe. No badges or detailing of any kind. The silver trim is a separate piece. I glued some green felt on the floor for carpet.
Dash gauge decals pinched from a 1/12 foose camaro kit. The original decal sheet only gives you 3 choices of screaming chicken and a big blue stripe. No badges or detailing of any kind. The silver trim is a separate piece. I glued some green felt on the floor for carpet.
22 September, 12:05
Rod -
I'm waiting on some 3d printed brake rotors and calipers. There will be more pics soon 🙂
I'm waiting on some 3d printed brake rotors and calipers. There will be more pics soon 🙂
22 September, 14:38
Rod -
Some more progress. Body was painted white with a black fade under the horizontal crease along the side of the body. Then the green/gold pearl, then about 5 coats of green tinted clear. When it hardens I'll polish, add decals and put the final 2k clear on. The camera can't capture the color, it looks nice sitting on the bench 🙂
Some more progress. Body was painted white with a black fade under the horizontal crease along the side of the body. Then the green/gold pearl, then about 5 coats of green tinted clear. When it hardens I'll polish, add decals and put the final 2k clear on. The camera can't capture the color, it looks nice sitting on the bench 🙂
3 October, 08:04
Rod -
This is my first 1/12 car. It needs way more paint than a 1/24! I used 2-1/2 bottles of sms pearl. Instead of using hobby clear coat I bought a can of clear acrylic spray from the auto parts store and decanted it for mixing and airbrushing. Good quality paint and much cheaper!
This is my first 1/12 car. It needs way more paint than a 1/24! I used 2-1/2 bottles of sms pearl. Instead of using hobby clear coat I bought a can of clear acrylic spray from the auto parts store and decanted it for mixing and airbrushing. Good quality paint and much cheaper!
3 October, 08:07
Rod -
I glued the boot shut as the fit wasn't perfect and there's nothing to see in there anyway (4x AA batteries, loaded from the bottom). I also am not confident the opening doors will work perfectly so I glued one shut. That way at least one side of the model will look clean if the door fit is a bit crappy.
I glued the boot shut as the fit wasn't perfect and there's nothing to see in there anyway (4x AA batteries, loaded from the bottom). I also am not confident the opening doors will work perfectly so I glued one shut. That way at least one side of the model will look clean if the door fit is a bit crappy.
3 October, 08:12
Thomas Wirsching
Great color choice! I am not into car modelling but yours look great!
Great color choice! I am not into car modelling but yours look great!
3 October, 09:40
Rod -
Pic 11 is probably closest to what it actually looks like. All the pics look sort of aqua and over exposed. In reality it's a bit darker with a fine pearl effect.
Pic 11 is probably closest to what it actually looks like. All the pics look sort of aqua and over exposed. In reality it's a bit darker with a fine pearl effect.
3 October, 11:13
Edward Rackemann
megszerezte ezt
megszerezte ezt
“NHS” Spitfire PR.XI PL983
Draw Decal 1:48
48-Spitfire-4 3 October, 11:13
Rca8
akarja ezt
akarja ezt
T-55 Czechoslovak Production with KMT-5M Mine Roller
MiniArt 1:35
37092 2021 Új alkatrészek Több téma (2)3 October, 11:11
Edward Rackemann
megszerezte ezt
megszerezte ezt
Convair F-102A Delta Dagger USAF in Vietnam Camouflage painting mask
LF Models 1:72
M7283 2020 Új eszköz 3 October, 11:08
Juergen Klinglhuber
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
29 képek
Eurofighter Typhoon - "Austrian Typhoons" 7L*WBÚj: 3 October, 11:02 1:72
...I managed to apply all the stencils. Now back to painting and preparing to glue the remaining exterior parts.
Projekt: #J7 Eurofighter Typhoon
26 31 May, 15:31
Juergen Klinglhuber
Looking forward to visit "Airpower24" tomorrow. This reminded me that I have taken some pictures the last weeks that did not yet find the way into the album. So here we go.
Looking forward to visit "Airpower24" tomorrow. This reminded me that I have taken some pictures the last weeks that did not yet find the way into the album. So here we go.
6 September, 19:53
Juergen Klinglhuber
Hello everyone - thanks for your intereest. I must admit that this is not a very exiting build, but thanks for yor interest - will to the painting this weekend and I just checked the decal sheet,....uuuii, there are plenty tiny stickers to be placed.
Hello everyone - thanks for your intereest. I must admit that this is not a very exiting build, but thanks for yor interest - will to the painting this weekend and I just checked the decal sheet,....uuuii, there are plenty tiny stickers to be placed.
15 September, 08:28
★ Starfish ★
Super Arbeit soweit! der Airpower19 Eurofighter ist nicht ganz so spannend wie die letzten beiden "Tiger" aber trotzdem nice to have 🙂
Super Arbeit soweit! der Airpower19 Eurofighter ist nicht ganz so spannend wie die letzten beiden "Tiger" aber trotzdem nice to have 🙂
29 September, 19:36
Skyhiker
I had trouble with the front landing gear on this kit breaking. I don't know if was just a fluke or if the mold is too thin. It may need reinforcement.
I had trouble with the front landing gear on this kit breaking. I don't know if was just a fluke or if the mold is too thin. It may need reinforcement.
29 September, 19:42
Juergen Klinglhuber
@ Starfish -thx for your comment. I have the Nato Tiger from '22 on the bench as well. Eurofighter Typhoon - "Austrian Tigers" 7L*WC | Album by jott (1:72)
And you are right - the more colourful livery is way more interessting (application of decals 🙂 - but also to look at it when done). I will up-date the other Album soon.
@ Starfish -thx for your comment. I have the Nato Tiger from '22 on the bench as well. Eurofighter Typhoon - "Austrian Tigers" 7L*WC | Album by jott (1:72)
And you are right - the more colourful livery is way more interessting (application of decals 🙂 - but also to look at it when done). I will up-date the other Album soon.
30 September, 06:52
Juergen Klinglhuber
@ Skyhiker
I am building 2 of those revel kits in parallel - both front landing gears broke already right after taking it from the sprue.... so thx for your advice, I hope other mates receive this info to take precaution.
@ Skyhiker
I am building 2 of those revel kits in parallel - both front landing gears broke already right after taking it from the sprue.... so thx for your advice, I hope other mates receive this info to take precaution.
30 September, 06:55
Harry Eder
Nice job Juergen! 👍 I'm looking forward to see your Eurofighters live at Euromodell Ried!
Nice job Juergen! 👍 I'm looking forward to see your Eurofighters live at Euromodell Ried!
2 October, 09:37
Juergen Klinglhuber
Hallo Raphael, Harry & Alec - welcome and thx for leaving your comments. @Harry - I guess the 2 Typhoons will be ready just in time. Looking forward to meet you there.
Hallo Raphael, Harry & Alec - welcome and thx for leaving your comments. @Harry - I guess the 2 Typhoons will be ready just in time. Looking forward to meet you there.
3 October, 10:59
Jon Bryon
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
38 30 September, 14:07
Rando
wow! that's spectacular. unique appearance too with those metallic spinner and nose caps
wow! that's spectacular. unique appearance too with those metallic spinner and nose caps
30 September, 15:34
Alexander Grivonev
Wow, a real eye catcher with those silver hubs. Clean work and paintjob, but also great subtle weathering 👍
Wow, a real eye catcher with those silver hubs. Clean work and paintjob, but also great subtle weathering 👍
30 September, 16:20
Gary Victory
Really nice build and weathering Jon. Especially the "Ghost" marks for the drop tanks. I'm guessing this is a post war Mossie..?
Really nice build and weathering Jon. Especially the "Ghost" marks for the drop tanks. I'm guessing this is a post war Mossie..?
1 October, 07:36
Alexander Grivonev
May I allow myself a little critique? I think the streaks/rainmarks should follow gravity's path instead of appearing parallel to the panel lines, like seen in picture 29. Just an idea for future projects. Otherwise like already said outstanding build!
May I allow myself a little critique? I think the streaks/rainmarks should follow gravity's path instead of appearing parallel to the panel lines, like seen in picture 29. Just an idea for future projects. Otherwise like already said outstanding build!
1 October, 10:57
Ludvík Kružík
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
48 képek
Mi-1M, model conversion by Special Hobby - WIPÚj: 3 October, 09:21 1:48
I added a strut to the dashboard. I glued an instrument bracket to the strut and added a bulkhead with braces under the ...
Projekt: Mil Mi-1M Czech Air Force
38 15 August, 08:24
Ludvík Kružík
I still miss this small helicopter in my collection of flying machines used in Czechoslovakia. The time has come for me to rectify that. 😉
I still miss this small helicopter in my collection of flying machines used in Czechoslovakia. The time has come for me to rectify that. 😉
15 August, 09:26
Ludvík Kružík
Hello, Greg. I know there's a Mi-1M kit in 1/72nd scale. Unfortunately, only this and a rather old kit from Special Hobby exists in 1/48 scale. In addition, this kit is an older version of the Mi-1A, which is different from the upgraded version of the Mi-1M. It has a different nose shape, different cockpit glazing and other minor changes. And since I decided to build the upgraded version of the Mi-1M, I will not avoid modifications to the kit.
To give you a better idea of the extent of the modifications to the kit, I've included a picture with the differences between the Mi-1A and Mi-1M versions color coded.
Hello, Greg. I know there's a Mi-1M kit in 1/72nd scale. Unfortunately, only this and a rather old kit from Special Hobby exists in 1/48 scale. In addition, this kit is an older version of the Mi-1A, which is different from the upgraded version of the Mi-1M. It has a different nose shape, different cockpit glazing and other minor changes. And since I decided to build the upgraded version of the Mi-1M, I will not avoid modifications to the kit.
To give you a better idea of the extent of the modifications to the kit, I've included a picture with the differences between the Mi-1A and Mi-1M versions color coded.
16 August, 22:23
Greg Baker
Oh, neat! I didn't realize there were so many changes between the versions. This is going to look great!
Oh, neat! I didn't realize there were so many changes between the versions. This is going to look great!
17 August, 15:09
Ludvík Kružík
Greg, thank you for your support.
____________________
I started building the model by making new transparent parts.
Greg, thank you for your support.
____________________
I started building the model by making new transparent parts.
17 August, 22:31
Greg Baker
Yeah. Nice work on the heat-n-smash moulding for the clear parts. That can be tricky to do.
Yeah. Nice work on the heat-n-smash moulding for the clear parts. That can be tricky to do.
18 August, 16:15
Ludvík Kružík
@Alec K
I used to buy ABC magazine regularly as a kid and eagerly awaited each new issue 🙂. I assume your mention of ABC magazine refers to the occasional modeling tutorial section.
@gorby, @Greg Baker
It's not too difficult to make new transparent parts by stretching warmed transparent foil over a pre-made template. Preparing the template is the most work. Stretching the warmed foil onto the template is just a routine that anyone can do after a few attempts.
@Alec K
I used to buy ABC magazine regularly as a kid and eagerly awaited each new issue 🙂. I assume your mention of ABC magazine refers to the occasional modeling tutorial section.
@gorby, @Greg Baker
It's not too difficult to make new transparent parts by stretching warmed transparent foil over a pre-made template. Preparing the template is the most work. Stretching the warmed foil onto the template is just a routine that anyone can do after a few attempts.
18 August, 22:17
Ludvík Kružík
Hello, Robert! Good to see you here. You haven't missed much so far. Up to this point I've been more concerned with preparation than building the model.
Hello, Robert! Good to see you here. You haven't missed much so far. Up to this point I've been more concerned with preparation than building the model.
28 August, 20:59
Ludvík Kružík
I want to try to use the sandwich construction in the production of new glass parts for the coptics. So I made (using the same process as the transparent parts) parts out of white plastic sheeting. These parts will have holes cut out for the windows. The transparent part will then be inserted between these two parts. The white outer and inner parts will form the embossed framing of the transparent part.
I want to try to use the sandwich construction in the production of new glass parts for the coptics. So I made (using the same process as the transparent parts) parts out of white plastic sheeting. These parts will have holes cut out for the windows. The transparent part will then be inserted between these two parts. The white outer and inner parts will form the embossed framing of the transparent part.
28 August, 21:18
Ludvík Kružík
Welcome, Jennifer, we're glad to have you on board and thank you for your goodwill. 🙂
Welcome, Jennifer, we're glad to have you on board and thank you for your goodwill. 🙂
30 August, 09:46
Ludvík Kružík
I came back from vacation and it started to rain. Ideal conditions for modelling. 🙂
So I'm back and continuing to work on the model. I need to glue the finished nose to the glued fuselage so the cockpit overlay fits exactly. That determines the workflow. First I have to finish the nose and the inside of the fuselage and glue all the parts that need to be glued to the fuselage halves from the inside. After gluing the fuselage halves together, I would no longer be able to get to these parts (or only with great difficulty).
Photos of the work progress will be coming soon.
I came back from vacation and it started to rain. Ideal conditions for modelling. 🙂
So I'm back and continuing to work on the model. I need to glue the finished nose to the glued fuselage so the cockpit overlay fits exactly. That determines the workflow. First I have to finish the nose and the inside of the fuselage and glue all the parts that need to be glued to the fuselage halves from the inside. After gluing the fuselage halves together, I would no longer be able to get to these parts (or only with great difficulty).
Photos of the work progress will be coming soon.
13 September, 20:42
Alexander Grivonev
Oh some modeling for big boys, not glueing perfectly fitting parts together and throwing on some paint! Following 👍
Oh some modeling for big boys, not glueing perfectly fitting parts together and throwing on some paint! Following 👍
13 September, 22:53
Ludvík Kružík
I glued several parts to both halves of the fuselage. These parts are glued from the inside, so they have to be glued before the fuselage is closed.
I also started working on making new parts for the cockpit.
I glued several parts to both halves of the fuselage. These parts are glued from the inside, so they have to be glued before the fuselage is closed.
I also started working on making new parts for the cockpit.
14 September, 21:06
Landlubber Mike
Wow, this is incredible work Ludvik! Thank you for sharing your steps - I've learned a lot from your pictures and descriptions!
Wow, this is incredible work Ludvik! Thank you for sharing your steps - I've learned a lot from your pictures and descriptions!
14 September, 21:15
Ludvík Kružík
@Landlubber Mike
Mike, thank you for your interest. Welcome aboard!
I've had the idea for this rebuild in my head for a few years now. Mainly because I've been waiting to see if anyone would start making 1:48 scale Mi-1M kits. Unfortunately, to this day, no manufacturer has this kit in their lineup. So I decided not to wait any longer and start building a model from what I have available.
My rebuild is just beginning. Most of the work on the model is yet to be done. I'd also like to try some new techniques that came to mind while planning to build this model.
@Villiers
Thank you for the compliment. I appreciate it very much.
@Landlubber Mike
Mike, thank you for your interest. Welcome aboard!
I've had the idea for this rebuild in my head for a few years now. Mainly because I've been waiting to see if anyone would start making 1:48 scale Mi-1M kits. Unfortunately, to this day, no manufacturer has this kit in their lineup. So I decided not to wait any longer and start building a model from what I have available.
My rebuild is just beginning. Most of the work on the model is yet to be done. I'd also like to try some new techniques that came to mind while planning to build this model.
@Villiers
Thank you for the compliment. I appreciate it very much.
15 September, 09:15
Ludvík Kružík
I didn't have much time today, so I didn't make much progress on the build. But every little bit of progress counts. 😉
I didn't have much time today, so I didn't make much progress on the build. But every little bit of progress counts. 😉
15 September, 20:43
Bruce Huxtable
Wow! You don't shy away from challenges! Watchinh with admiration, and hoping to learn lots too. Hoping you are not amongst the floods? Stay safe!
Wow! You don't shy away from challenges! Watchinh with admiration, and hoping to learn lots too. Hoping you are not amongst the floods? Stay safe!
16 September, 12:29
Ludvík Kružík
J35J welcome! I hope you like it here.
Bruce, I like a challenge like that. I like to experiment and enjoy thinking of and then implementing ways to improve my model.
I appreciate your concern for my safety. I live in a town in the highlands that wasn't badly affected by the floods. Only the river that runs through our town has increased flow, but it hasn't spilled out of its bed. Moreover, our house is 80 metres above the river, so even if the river had spilled out of its bed, it would certainly not have reached our house.
J35J welcome! I hope you like it here.
Bruce, I like a challenge like that. I like to experiment and enjoy thinking of and then implementing ways to improve my model.
I appreciate your concern for my safety. I live in a town in the highlands that wasn't badly affected by the floods. Only the river that runs through our town has increased flow, but it hasn't spilled out of its bed. Moreover, our house is 80 metres above the river, so even if the river had spilled out of its bed, it would certainly not have reached our house.
17 September, 07:08
Bruce Huxtable
It sounds an idyllic location.....Opravdu, česka příroda je krasná....
It sounds an idyllic location.....Opravdu, česka příroda je krasná....
17 September, 13:03
Ludvík Kružík
Bruce, thank you for the compliment. I'm sure the nature is beautiful in England too. 😉
Bruce, thank you for the compliment. I'm sure the nature is beautiful in England too. 😉
18 September, 10:23
bughunter
Another big bunch of parts, not to mention some kit parts, come together to form one big model! Not to be missed!
I'm late, but I have an excuse. First I was on holiday, and then this stupid C-virus knocked me out.
Another big bunch of parts, not to mention some kit parts, come together to form one big model! Not to be missed!
I'm late, but I have an excuse. First I was on holiday, and then this stupid C-virus knocked me out.
18 September, 20:29
Ludvík Kružík
Alec, thank you for your support and your kind words.
Welcome, Frank. I hope you're okay, and I'm really glad you're one of my guests.
It's definitely not too late. I still have most of my work ahead of me. In fact, you could say I'm just getting started.
Alec, thank you for your support and your kind words.
Welcome, Frank. I hope you're okay, and I'm really glad you're one of my guests.
It's definitely not too late. I still have most of my work ahead of me. In fact, you could say I'm just getting started.
18 September, 21:20
TH SCALE MODELS (Thomas Haberl)
Uhhhhhh … this is going to be another good one from you! I'm in 👍
Uhhhhhh … this is going to be another good one from you! I'm in 👍
23 September, 04:58
Ludvík Kružík
I'm struggling with time rather than the model at the moment. At least I managed to draw a new dashboard. After printing it in scale (1/48) on photo paper I will use it instead of the kit part.
I'm struggling with time rather than the model at the moment. At least I managed to draw a new dashboard. After printing it in scale (1/48) on photo paper I will use it instead of the kit part.
23 September, 23:41
John
Another Ludvik conversion build with all the accuracy and attention to detail.we've come to expect. It's looking good, can't wait to see the final result! 👍
Another Ludvik conversion build with all the accuracy and attention to detail.we've come to expect. It's looking good, can't wait to see the final result! 👍
23 September, 23:42
Ludvík Kružík
Welcome, John. Please have a little patience. This project is quite demanding and I will need a lot of time to complete it.
Welcome, John. Please have a little patience. This project is quite demanding and I will need a lot of time to complete it.
23 September, 23:50
John
Ok, I aimed that to "I can wait to see the final result" (but I'm still eager) 😉
Ok, I aimed that to "I can wait to see the final result" (but I'm still eager) 😉
24 September, 02:03
Alec K
Wow, the dashboard looks amazing. I can only imagine how much time that took. Really interested how it looks completed 👍
Wow, the dashboard looks amazing. I can only imagine how much time that took. Really interested how it looks completed 👍
24 September, 14:09
Ludvík Kružík
Alec, I drew the dashboard in the evenings for 5 days (about 3 to 4 hours each day). Add to that additional time (about 5 hours) for test printing and subsequent corrections.
I am attaching a photo of a test black and white print of the dashboard after all the modifications are complete. I will print the dashboard for the model in color later.
Alec, I drew the dashboard in the evenings for 5 days (about 3 to 4 hours each day). Add to that additional time (about 5 hours) for test printing and subsequent corrections.
I am attaching a photo of a test black and white print of the dashboard after all the modifications are complete. I will print the dashboard for the model in color later.
24 September, 18:34
Ludvík Kružík
According to the photos I modified the fuselage where the main landing gear is attached to it.
According to the photos I modified the fuselage where the main landing gear is attached to it.
24 September, 20:00
Ludvík Kružík
Guy, Jakub and Robert thank you for your comments, it's a nice encouragement for further work.
After today, the hull is glued together. Now I'm adjusting the shape of the transparent cockpit cover.
Guy, Jakub and Robert thank you for your comments, it's a nice encouragement for further work.
After today, the hull is glued together. Now I'm adjusting the shape of the transparent cockpit cover.
25 September, 21:13
Ben M
I continue to enjoy seeing this one take shape. Quite the effort to convert it!
I continue to enjoy seeing this one take shape. Quite the effort to convert it!
25 September, 23:27
Ludvík Kružík
Villiers, the completion of the fuselage is only temporary at this time. It's only to modify the shape of the transparent cockpit cover.
Once the cockpit cover is the correct shape, I will take the fuselage nose down again to continue work on the cockpit interior.
Villiers, the completion of the fuselage is only temporary at this time. It's only to modify the shape of the transparent cockpit cover.
Once the cockpit cover is the correct shape, I will take the fuselage nose down again to continue work on the cockpit interior.
26 September, 10:36
Ludvík Kružík
Greg, thank you for the compliment.
A small shift in the work on the internal equipment of the helicopter's nose.
Greg, thank you for the compliment.
A small shift in the work on the internal equipment of the helicopter's nose.
2 October, 19:36
Landlubber Mike
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
5 11 September, 16:13
Alberto Traverso
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
16 4 September, 23:58
Neuling
Top work! Mud and camouflage look good, but the model was also eyecandy in mint fresh condition.
Top work! Mud and camouflage look good, but the model was also eyecandy in mint fresh condition.
3 October, 09:46
Alberto Traverso
thanks Neuling, yes sometimes it's some kind of a hard decision to cover the paint job
thanks Neuling, yes sometimes it's some kind of a hard decision to cover the paint job
3 October, 10:59
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=hu
35
35
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo